FNIRSI Firmware upgrade for 2C53T and LCR-P1
Firmware update for some fnirsi products.
- 2C53T Firmware V1.0.7
- LCR-P1 Firmware V1.0.8
Firmware update for some fnirsi products.
NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
Download: All Games in One Archive (150)
source: csdb.dk
This RGB mod by Yannick Erb was made to work with three different consoles:
I wanted to try this RGB mod even though i am the man who created the ZOE RGB way back in 2013 for Intellivision but on my Intellivision i still had the rough prototype of the mod installed and since i no longer time to assemble a new ZOE RGB interface for Intellivision i have decided to try this one by Yannick which is basically identical to my interface.
I configured the RGB mod to work with Intellivision, there are some jumpers to configure, everything worked at first try the image is clear and stable thanks also to a small trick that this mod includes, a capacitor on the SYNC line that makes the image more stable in some situations.
I also took advantage of completely removing the RF modulator (absolutely useless) and in the hole of the antenna plug i fixed a DIN connector for the RGB / Audio output and SCART Switching, i also replaced the flat of the power cable of the intellivision motherboard because it had completely disintegrated.
Below you will find the usual photo gallery and the download of the GERBER + the files needed to assemble the PCB by JLCPCB.
Gallery:
This is the right way for the Scart Switching with source of 12v.
Download: GERBER + Files needed to assemble the PCB by JLCPCB (43)
Project Homepage: https://oshwlab.com/yannick.erb/Intellivision-Secam-to-RGB_copy
Me, after making yet another useless purchase.
I’ll try to explain what happened; i already knew about the existence of this product but having a practically similar if not identical one i gave up but i always had my eye on the FNIRSI LCR-P1 which is built a little better, lighter and the firmware is frequently updated and consequently some bugs are solved, but 28.00 euros, no way!
I signed up for the twentieth time to aliexpress by creating a new account, the price from 28,00 euros dropped to 18,00 euros as a first purchase on Aliexpress but it was still too much.
I searched the internet for discount coupons for aliexpress, they can be found, i found a discount coupon of 6,00 euros (after trying at least twenty it worked) i applied it and the total at this point amounted to 12,00 euros shipped. How can you not buy something for 12,00 euros! how?
The product is good, similar to the previous one that you can find here with the review and photos.
So i won’t write everything again that i had already written in the other post, it’s identical but a little better.
I leave you to the photo gallery.
Gallery:
source: fnirsi.com
.- the inexpensive dual-SID/FM replacement that you can build yourself -.
SIDKick pico by Frenetic is a microcontroller-based C64 SID replacement. Analog inputs for paddles and mice are available just as for the original SID.
This release contains the firmware for SIDKick pico with only minor changes:
Note:
There are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2, and the new SIDKick pico2040DAC.
Please read the troubleshooting section in case you experience problems.
Review:
My SID Player plays SID tunes with the SIDKick-pico.
SIDKick-Pico by Frenetic.
Download: SIDKick-Pico Firmware v0.211 (80)
The saying “if you spend few amount of money you get shit” is not always valid and this could be an example.
I would just like to clarify before receiving gratuitous insults that these tools are intended for Hobbyist use and NOT Professional.
FNIRSI (Shenzhen FNIRSI Technology Co., Ltd.) is a large Chinese manufacturer of electronics instruments at low price, given the very low cost i wanted to try three products and i was pleasantly surprised by the operation and precision, they are less ‘Chinese’ than other products with the same price.
I wanted to make a simple comparison with the FNIRSI® 2C53T (3in1 Oscilloscope 50MHz, Multimeter, Signal Generator) and with my now ancient WELEC W2022A oscilloscope with some problems and should be replaced, but that said the FNIRSI defends itself well and for some measurements it is more precise, the same goes for the smaller model namely the DSO-153 2-IN-1.
The Smart Digital Tweezer is undoubtedly very comfortable and quite precise, I noticed some hesitation on the measurement of Electrolytic Capacitors even after calibration while it is acceptable for the measurement of Inductors, Resistors and Capacitors (for example Ceramic, Polyester), another strong point is that it is magnetized (see photo) a small adhesive metal plate is provided.
Attention there are different purchase options for these products, some include all the accessories others do not, obviously it costs less.
Products tested:
FNIRSI DSO-153: https://www.fnirsi.com/products/dso-153
FNIRSI 2C53T: https://www.fnirsi.com/products/2c53t
FNIRSI LCR-ST1: https://www.fnirsi.com/products/lcr-st1
FNIRSI 2C53T Oscilloscope Review (not made by me): https://www.youtube.com/watch?v=3nmr54Ez5Cs
Gallery:
Commodore 64 Breadbin Case – Your Color Your Style.
The Breadbin is back and better than ever!
I replaced the Commodore 64C style case color SX64 purchased back in 2017 from return-magazin.de of my Commodore 64 with U64 first version with the new transparent case in Breadbin style indiegogo campaign.
As you can see from the photos there is also a new transparent dust cover, the new keyboard from indiegogo campaign of a few years ago, the internal LED strip has been configured to use only the white color with medium brightness.
Gallery:
source:
https://www.indiegogo.com/projects/commodore-64-breadbin-case-your-color-your-style/
https://www.indiegogo.com/projects/keycaps-for-your-commodore-computer/
NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
Download: All Games in One Archive (873)
source: csdb.dk
Hoxs64 written by David Horrocks is a Commodore 64 emulator for Microsoft Windows (DirectX 11+)
The emulator substantially reproduces this legacy machine in minute detail.
Download:
source: hoxs64.net
Flashcart for Atari 2600 and Atari 7800 by Andrea Ottaviani based on Pico “Purple” clone, easy to build and cheap.
This is a “double-face” flashcart, it could be used for both Atari 2600 and Atari 7800, simply rotating it and inserting the cart in different Atari, it doesn’t support all bank-switching schemas, but enough to enjoy your Atari 2600 / Atari 7800 with a single flash-carts.
I made some improvements to the PCB and the cartridge case taking inspiration from the project published on GITHUB.
PCB improvements:
Thanks to a dear friend who can draw 3D (i’m completely hopeless) we redesigned the cartridge case from scratch recovering all the measurements of the original cartridge (Atari 2600/7800).
There are many improvements, below i try to list some of them.
The GERBER file for the PCB and STL for the cover will soon be available on Andrea Ottaviani Flashcart 10400 GITHUB page.
I leave you the links to buy the screws and micro switches.
M2 screws with countersunk head: https://www.amazon.it/dp/B0D3DXFGHW
Mini SPDT Switch: https://www.amazon.it/dp/B0BTM3WQXN
Gallery:
Download Gerber & STL Files:
Download:
Trebors 7800 ROM PROPack: http://7800.8bitdev.org/index.php/Trebors_7800_ROM_PROPack
Atari 2600 ROM: https://archive.org/details/Atari2600FullRomCollectionReuploadByDataghost
source: github.com/aotta/PicoA10400
A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.
Changelog:
Download:
NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
Download: All Games in One Archive (1291)
source: csdb.dk
Recent Comments