Home > Gallery, Retro Computers and other stuff..., SD/MMC Interfaces > SD2Iec v1.2 KIT – PCB & Components

SD2Iec v1.2 KIT – PCB & Components

SD2Iec v1.2 KIT - Components & PCB

Autopsy:

SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 microcontroller from the Atmel AVR microcontroller family. The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64.

Hardware and the microcontroller’s firmware is available as open source (GPL).

source: sd2iec.de gitweb forum thread c64-wiki

  1. Antitrack
    March 16th, 2010 at 12:50 | #1

    How expensive was it – where can one buy this ?

  2. March 16th, 2010 at 14:51 | #2

    Hi,

    May 2008: 2 x SD2Iec in KIT with ATMEL Soldered incluse shipping: 47.50 Euro

  3. ivan
    December 19th, 2017 at 17:23 | #3

    salve, per 2 kit le spedizioni per l’italia quanto costano?
    hi, for 2 kits shipments for Italy how much do they cost?

  4. ivan
    December 19th, 2017 at 17:30 | #4

    send me all the details of the shipments and the costs for 1 kit to this e-mail jb75@hotmail.it

  5. December 20th, 2017 at 19:39 | #5

    Salve Ivan , l’articolo e’ del 2009, questi KIT non erano in vendita e non lo sono tuttora, qui non si vende nulla.

    Se cerchi SD2IEC ne trovi a centinaia su ebay:

    https://www.ebay.it/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xsd2iec.TRS0&_nkw=sd2iec&_sacat=0

*