Autopsy:

1234►

from Wikipedia:

The Atari ST is a home computer released by Atari Corporation in June 1985. It was commercially available from that summer into the early 1990s. The “ST” officially stands for “Sixteen/Thirty-two”,[2] which referred to the Motorola 68000′s 16-bit external bus and 32-bit internals. Due to its graphical user inferface, it was known as the “Jackintosh”, a reference to Jack Tramiel.

The Atari ST was part of the 16/32 bit generation of home computers, based on the Motorola 68000 CPU noted for 128 kB of RAM or more, a graphical user interface, and 3½” microfloppy disks as storage. It was similar to the Apple Macintosh and its simple design allowed the ST to precede the Commodore Amiga’s commercial release by almost two months. The Atari ST was also the first personal computer to come with a bit-mapped color GUI, using a version of Digital Research’s GEM released that February.

The ST was primarily a competitor to the Apple Macintosh and the Commodore Amiga systems. Where the Amiga had a graphics accelerator and wavetable synthesis, the ST had a simple frame buffer and a 3 voice synthesizer chip but with a CPU faster clocked, and had a high-resolution monochrome display mode, ideal for business and CAD. In some markets, particularly Germany, the machine gained a strong foothold as a small business machine for CAD and Desktop publishing work. The Atari ST also enjoyed some market popularity in Canada.

The ST was also the first home computer with integrated MIDI support. Thanks to its built-in MIDI, it enjoyed success for running music-sequencer software and as a controller of musical instruments among amateurs and professionals alike, being used in concert by bands and performers such as Jean Michel Jarre, Madonna, Eurythmics, Tangerine Dream, Fatboy Slim, and 1990s UK dance act 808 State, as well as naming German digital hardcore band Atari Teenage Riot.

The ST was later superseded by the Atari STE, Atari TT, Atari MEGA STE and Falcon computers.

In late 1989, Atari released the 520STE and 1040STE (also written STE), enhanced version of the ST with improvements to the multimedia hardware and operating system. It featured an increased color palette of 4096 colors from the ST’s 512 (though the maximum displayable palette of these without programming tricks was still limited to 16 in the lowest 320×200 resolution, and even fewer in higher resolutions), Genlock support, and a graphics co-processor chip called Blitter, which could quickly move large blocks of data (most particularly, graphics sprites) around in RAM. It also included a new 2-channels digital sound chip that could play 8-bit stereo samples in hardware at up to 50 kHz.

Two enhanced joystick ports (EJP) were added (two normal joysticks could be plugged into each port with an adaptor), with the new connectors placed in more easily-accessed locations on the side of the case. The enhanced joystick ports were re-used in Atari’s Jaguar console, and are compatible. RAM was now much more simply upgradable via SIMMs. Despite all of this, it still ran at 8 MHz.

Atari STe: More Or Less Zero by Dead Hackers Society on real Hardware.

source: wikipedia

Some new games (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups: S.E.U.C.K. Trainers United, Really Proud Lamers and Laxity.

Download:

• The Mollusk +8HF [pal/ntsc] (1034)
• Trash Course +3H 101% (1185)
• The Last Amazon Trilogy (1119)
• The Last Amazon +2 (1040)
• The Last Amazon 2 +2 (1105)
• The Last Amazon Special Edition +3 (1051)
• Crimson Twilight Preview +J [pal/ntsc] (996)
• Magic Wood (Zauberwald) +1E [english/german] [pal] (1051)
• All Games in One Archive (2387)

 source: csdb.dk

Gallery:

The PETdisk is a new storage device, made by bitfixer, for the Commodore CBM / PET with an IEEE-488 port.

The system is in two parts. A datassette module that makes it possible to play “data” from a PC soundcard to the CBM / PET and play “data” from the CBM / PET to the PC. The IEEE-488 module has an SD card and a micro processor.

You can use the commands LOAD, SAVE and LOAD “$” to load or store data on the SD card. The device number can be changed with a help of a jumper. The USB cable is used to provide 5VDC from the datassette module to the IEEE-488 module.

For more informations,schematics,documentations and price of the kit please visit the site of the author.

Video demostration:

source: bitfixer.com

Micro SwinSID (SwinSID88) is a hardware replacement for legendary SID sound chip which was placed in every Commodore C64 computer and other devices.

Firmware update (20120524):

• This version has only one improvement: fixed audio muting emulation.

Download: Nano/Micro SwinSID - Firmware update (20120524) (2116)

source: forum64.de

The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.

The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).

There are two differents emulators:

• A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
• A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.

Release notes for the HxCFloppyEmulator software v2.0.3.0:

• PRE-RELEASE – IN DEVELOPMENT: HxCFloppyEmulator software v2.0.3.0 (Windows & Mac OS X support !)

Download: HxCFloppyEmulator v2.0.3.0 *BETA* (1137)

source: hxc2001.free.fr

ST-Paint is a Drawing program that lets you make Atari St picture on Windows based PC.

ST-Paint is still in a beta phase and it’s made by Peter Jørgensen same author of the program: Ym2149 Tracker.

Download:

• ST-Paint latest Beta (20-09-2012) (1012)

source: fedepede04.dk

Some new games (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups: Wrampi, Nostalgia, The Hidden Farts and Laxity.

Download:

• The Lost Caves 1-7 [EF] (1149)
• Zug um Zug 1 [German] (1022)
• Pushover Preview 3 + [pal/ntsc] (1044)
• Pinball Dreams Preview 2 [pal] (1056)
• Split Personalities +7D 101% [pal/ntsc] (1295)
• All Games in One Archive (2366)

source: csdb.dk

Sorry, this entry is only available in Italian.

Autopsy:

123►

The Commodore PET 2001-N (the N was short for “New”) is a successor to the Commodore PET 2001, it has a bigger keyboard and 32KB dynamic RAM memory. The larger keyboard means that the first cassette drive now has to be an external unit.

from Wikipedia:

The Commodore PET (Personal Electronic Transactor) was a home/personal computer produced from 1977 by Commodore International. A top-seller in the Canadian and United States educational markets, it was Commodore’s first full-featured computer, and formed the basis for their entire 8-bit product line.

The PET 2001 was announced at the Winter CES in January 1977 and the first 100 units were shipped later that year in October. However, the PET was back-ordered for months and to ease deliveries, early in 1978 Commodore decided to cancel the 4 kB version (also because the user would be left with barely 3 kB of RAM).

Although the machine was fairly successful, there were frequent complaints about the tiny calculator-like keyboard, often referred to as a “chiclet keyboard” because the keys resembled the gum candy. The key tops also tended to rub off easily. Reliability was fairly poor, although that was not atypical of many early microcomputers. Because of the poor keyboard on the PET, external replacement ones quickly appeared.

In 1979, Commodore replaced the original PET 2001 with an improved model known as the 2001-N (the N was short for “New”). The new machine used a standard green-phosphor monitor in place of the light blue in the original 2001. It now had a conventional, full-sized keyboard and no longer sported the built-in cassette recorder. The kernel ROM was upgraded to add support for Commodore’s newly-introduced disk drive line. It was offered in 8kB, 16kB, or 32kB models as the 2001-N8, 2001-N16, and 2001-N32 (the 8kB models were dropped soon after introduction). Finally, Commodore added a machine-language monitor to the kernel ROM that could be accessed by jumping to any memory location with a BRK instruction. It did not include a built-in assembler and required the user to enter hexadecimal numbers for coding.

Sales of the newer machines were strong, and Commodore then introduced the models to Europe. The result was the CBM 3000 series (‘CBM’ standing for Commodore Business Machines), which included the 3008, 3016 and 3032 models. Like the 2001-N-8, the 3008 was quickly dropped. The change to CBM occurred because of a trademark dispute with Philips over the PET name.

source: wikipedia

Some new games (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups: Laxity, Mayday!, The Hidden Farts and Nostalgia.

Download:

• Star Commando HS (1102)
• Minit Man +5D [ntsc/pal] (1073)
• Waterline +3DF [ntsc/pal] (1148)
• Motocross! +2DHF [ntsc/pal] (1137)
• Knight\'n\'Grail 2 Preview 2 + [pal] (1104)
• Invaders HS (1149)
• ALF in the Color Caves +D (1087)
• Quod Init Exit +2HD [pal/ntsc] (1108)
• All Games in One Archive (2426)

source: csdb.dk

Nightfall Retro Gallery

Photo Gallery update of my Retro Collection / Retro Trash

Clicking on the photo will download the highest resolution version available (10708 x 5137).

Updates of the Nightfall Retro Collection:

You can see my Retro collection with a Virtual Tour, we hope one day to be able to expose my things to the public.

Many thanks to Andrea Schillani and Freddy Anselmo for the photos and graphic support.

CBM prg Studio Version 2.5.0 is released. There are a lot of new features in this version. I’d really appreciate it if you report any bugs you find or have any suggestions/comments.

CBM prg Studio allows you to type a BASIC or Machine Code program in using a nice Windows environment and convert it to a ‘.prg’ file which you can run on an emulator, or even a real C64 / VIC20 or PET if you’re feeling brave and have the right kit.

CBM prg Studio is the result of merging C64PrgGen and VIC20PrgGen. Adding new features and fixing bugs in two apps which were 95% similar was a bit of a nightmare so merging them made sense.

It was also a good opportunity for a face lift and to add some new features, such as:

• Programs are project based, meaning all related source files, sprite files etc. are kept in one place and multiple source files can be linked more easily.
• Tabbed MDI.
• Syntax highlighting.

What CBM prg Studio isn’t is a front-end for tok64, cbmcnvrt, bastext or any other tokeniser / detokeniser / assembler. It’s all been written completely from scratch.

New features:

• Some of the IDE’s colours can be changed (background, tab strip, selected and non-selected windows).
• Menu to control open windows.
• Warnings if invalid BASIC jump (goto, gosub etc.) destinations are detected.
• ZPOpt directive added.

Bugs fixed:

• Added ‘missing’ colours to VIC 20′s screen designer.
• Default project location not being saved if the target machine was not changed.
• Assembler not assembling mixed case text directive strings properly.
• Dark and light gray colours were switched.
• Opening a project after a project had already been opened would use ‘my documents’ rather than the project directory.
• Incbin failed when used screen designer files.
• No colours were visible when starting the screen designer without loading a previous file.
• CTRL+Z not scrolling to changed text.
• * not recognised for current address.
• Local labels not recognised in certain circumstances.
• Generation/import of prgs > 65k for C128 programs would fail.
• Missing BASIC 7 ‘RLUM’ keyword.

Download: CBM prg Studio v2.5.1 (1026)

source: ajordison.co.uk

Gallery:

This is the preview of the Manosoft C64SD Infinity v2.0 Blue version. This version will be soon available for sale.

Here the full review of the Manosoft C64SD Infinity v2.0.

source: manosoft.it

Autopsy:

from Wikipedia:

The Power Mac G4 was a series of personal computers that was designed, manufactured, and sold by Apple between 1999 and 2004.

They used the PowerPC G4 (PPC74xx) series of microprocessors. They were heralded by Apple to be the first personal supercomputers, reaching speeds of 4 to 20 Gigaflops. They were both the last Macintoshes to boot natively into Classic Mac OS and the first to boot exclusively into Mac OS X.

The original Apple Power Mac G4, code name “Yikes!”, was introduced at the Seybold conference in San Francisco on August 31, 1999, with 400 MHz, 450 MHz and 500 MHz configurations available. In October 1999, Apple was forced to postpone the 500 MHz because of poor yield of the 500 MHz chips. In response, Apple “speed dumped” the processor speed in each configuration by 50 MHz but caused some controversy by not decreasing the price of the machines.

Another generation of Apple Power Mac G4s were introduced on August 13, 2002, featuring both a new Xserve-derived DDR motherboard architecture and a new case design, known as “Mirrored Drive Doors” (MDD). All models were available in dual processor configurations running at 867 MHz, 1 GHz or 1.25 GHz. As with the Xserves, the PowerPC 7455 CPU used does not have a DDR frontside bus, meaning the CPU could only use at most 50% of the new system’s theoretical memory bandwidth, providing no improvement over previous models. The rest was available to the graphics card and I/O systems. A dual processor 1.25 GHz model would be the last Power Mac G4 the company offered to the public after the announcement of the new Power Mac G5, introduced in June 2003.

source: wikipedia

SNK Neo Geo Universe Bios v3.1 released.

The UNIVERSE BIOS is for owners of MVS or AES hardware that want an easy way to change country region or between Arcade or Console mode on boot.

Also included are other features that are not possible using the standard MVS bios.

source: unibios.free.fr