Some new games (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups: Really Proud Lamers, Laxity, Achim and Nostalgia.
Download:
source: csdb.dk
Re-found in a good working state some of our old Amiga demo disks.
Following… the image of the disks in ADF format.
Download:
Re-found in a good working state some of our old Amiga demo disks.
Following… the image of the disks in ADF format.
Download:
Today i have made a decent recovery of PC Card / Ram / CPU and other things from some servers that were being scrapped.
New game releases – Take a peek at the newest games available for the Commodore 64.
Download:
source: csdb.dk
Atari Interlace Studio is a easy image editing software for Interlaced images of Atari XE/XL. AIS runs under M$ Windows.
Supports INP, IST, MCP, MAX, HIP, CIN, PLM, APC, PZM, ILC, RIP formats for interlaced images and MIC, GR9, G10, G11 formats for non-interlaced.
Download: Atari Interlace Studio (AIS) v1.3.5 (980)
Sorry, this entry is only available in Italian.
SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 or ATmega1284p microcontroller from the Atmel AVR microcontroller family.
The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller’s firmware is available as open source (GPL).
Changelog:
2012-02-26 – release 0.10.3
- Bugfix: Un-break I2C display communication.
Download:
source: sd2iec.de gitweb forum thread c64-wiki
Atari SAP Music Archive (ASMA) is a Atari XL-XE music collection. It is one of the largest and most accurate computer music collections known.
ASMA v3.5 contains 4317 tunes, 460 of which are new! Moreover, ASAP has been updated to the latest version and SAPMaker has been recompiled to run under the latest Windows.
Download: Atari SAP Music Archive v3.5 (1020)
source: asma.atari.org
C64 Studio is a .NET based IDE written by Georg Rottensteiner. This app supports project based C64 assembly.
The internal assembler is using the ACME syntax. In connection with Vice the IDE allows you to debug through your code and watch variables/memory locations, registers and memory.
Any other emulator can be set up as well if it’s startable via runtime arguments. C64 Studio allows you to compile to raw binary, .prg, .t64 or cartridge format (.bin and .crt for 8k and 16k). Additionally to this C64 Studio comes with a charset and sprite editor.
Version history (19.02.2012 – 2.1):
- Fixed drop bug (.c64 file would not open project).
- Fixed run bug if basic project was run after asm project.
- Synced toolbar new menu with menu new.
- Fixed bug in !bin macro (!bin <filename>,1000,0 would raise an error even when the file was big enough).
- Added syntax coloring for opcodes (ror, rol, bvc, bvs, brk, php, plp, clv, cld).
- Fixed bug in Basic parser, now to/from label mode works again for goto.
Download: C64 Studio v2.1 (892)
source: lemon64.com
OpenCBM Command is a M$ Windows command line utility for automating the creation of disk images for the Commodore 8-bit line of computers.
Typical usage is to automate OpenCBM’s D64Copy program, but you can also automate the nibread (or any other) utility by changing the configuration file or specifying a new program on command line.
Download: OpenCBM Archiver v1.2 (816)
source: opencbmarchiver.codeplex.com
Some new cracked and trained games from your favorites groups: Avatar, Laxity and Genesis Project.
Download:
source: csdb.dk
This is a all-in-1 utility for the EasyFlash 3 cartridge and its USB connection to the PC. The utility is precompiled for M$ Windows and Linux, Source are available.
Prerequisites:
- PC has installed Easyflash 3 USB driver. If not please get it from: https://bitbucket.org/skoe/easyflash/wiki/EF3InstallDriver
- PC and EF3 are connected using the USB cable.
- EF3 has jumpers set to “DATA” (down) mode.
Changelog from v1.4:
- Created a single “ef3usb.prg” and “ef3usb.exe” utility which includes all previous utilities in one single package.
- Speeded up the Turbo Reader a bit with reverse sector loading.
- Added 40 track support to D64 read and write (turbo version only!)
- Added turbo format command – 35 and 40 sectors. Curtesy of tlr’s “Format II” utility.
- “dir” and “copy” commands now also display the disk name and ID.
- “execute” command now also accepts .P00 files.
- “xfer” command added. This command will transfer (copy) files from the C64 to the PC! You can write these files in .PRG or .P00 format.
Download: EasyFlash 3 USB Utilities v1.7 (1447)
source: forum64.de noname.c64.org/csdb
This version of ADF Opus was modified by Jean-François Del Nero to directly handle HFE files images for the SD HxC Floppy Emulator.
Download: ADF Opus For SD HxC Floppy Emulator (1210)
source: hxc2001.free.fr
New game releases – Take a peek at the newest games available for the Commodore 64.
Download:
source: csdb.dk
Some new games (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups: Really Proud Lamers, Laxity, Achim and Nostalgia.
Recent Comments