Archive

Author Archive

Texas Instruments TI-99/4A with some Extra Accessories

August 6th, 2009 1 comment
Texas Instruments TI-99/4A

Autopsy:

from Wikipedia:

The Texas Instruments TI-99/4A was an early home computer, released in June 1981, originally at a price of USD $525.

It was an enhanced version of the less-successful—and quite rare—TI-99/4 model, which was released in late 1979 at a price of $1,150. The TI-99/4A added an additional graphics mode, “lowercase” characters comprised of small capitals, and a full travel keyboard. Its predecessor, the TI-99/4, featured a calculator-style chiclet keyboard and lacked any provision for lowercase text.

The TI-99/4A’s CPU, motherboard, and cartridge (“Solid State Software”) slot were built into a single console, along with the keyboard. The power supply board (linear in early systems, switching in later systems) was housed below and in front of the cartridge slot under the sloped area to the right of the keyboard.

source: wikipedia 99er.net

Categories: Gallery, Texas Instruments

PET 2001-8 (6540 to 2716 ROM Adapters)

August 6th, 2009 1 comment

PET 2001-8 (6540 to 2716 ROM Adapters)This is a small adapter which replaces the unobtanable 6540 ROM chips used in the Commodore PET 2001-8 computers with a standard 2716 EPROM.

They will work as a drop in replacement for any ROM chip in a PET 2001-8.

source: 6540rom.com

Categories: CBM/PET, News & Rumors, Today

32.5 Degrees Celsius in my Computer Room ;-(

August 2nd, 2009 No comments

32.5 Degrees Celsius in my Room
I hate summer. I can’t wait for it be over. I hate the hot weather, I hate bugs!!! They scare me so much. Fall is my favorite season followed very closely by Winter. I am thinking of moving to the North Pole.

SD2Iec v1.2 KIT – PCB & Components

July 29th, 2009 5 comments
SD2Iec v1.2 KIT - Components & PCB

Autopsy:

SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 microcontroller from the Atmel AVR microcontroller family. The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64.

Hardware and the microcontroller’s firmware is available as open source (GPL).

source: sd2iec.de gitweb forum thread c64-wiki

Some Coleco Vision Games Cartridges

July 29th, 2009 No comments
Coleco Vision Cartridges

Autopsy:

Cartridges list:

  • Subroc by Sega.
  • Looping by Venture Line Inc.
  • PitStop by Epyx.

Euskal Encounter 17 Competition Results

July 28th, 2009 No comments

euskalEuskal Encounter is a computer party for computer amateurs and professionals seeking a knowledge exchange and willing to be involved for a few days in any kind of activity related to computers.

C64 – Mixed Graphics:

  • 1 Cauldron2 by JSL
  • 2 Loving Dream by Almighty God
  • 4 Classics Never Die by Stage7

C64 – Mixed Music:

  • 2 Funky Old Bones by SIDwave
  • 4 Sunshine Dreams by A-Man
  • 5 Boogie 8580 by NecroPolo

source: noname.c64.org euskalencounter.org

Categories: C64/SX64, News & Rumors, Today

LCP 2009 Demo & Photo are online

July 28th, 2009 No comments

lcp2009Most of the compo stuff is now up in the archive. You can also find some photos there.

source: lcp.c64.org

JiffyDOS Kernal Roms & Manual

July 27th, 2009 14 comments

JiffyDOS is a Disk Operating System (DOS) enhancement which gives your VIC-20, C-16, PLUS/4, C-64, or C-128 the disk access speed it has always needed.

A chip-for-chip replacement for the Kernal ROM in your computer and the DOS ROM in your disk drive(s), JiffyDOS achieves levels of performance and compatibility unmatched by other disk speed-enhancement products.

Download:

TRY and BUY the original copy.

source: cmdrkey.com

ROM-el PCB ready to test

July 26th, 2009 No comments

ROM-el PBC boardsfrom Homepage:

The PCB house shipped the first two ROM-el boards for inspection and testing.

Once they are assembled and testing, I will release the design to production. As one can see, the PCB is a merged set of 4 designs.  The tabs between the designs are designed to be broken, separating the individual units after assembly.

source: jbrain.com

MCC: Multiple Classic Computer Platform

July 26th, 2009 2 comments

Multiple Classic Computer Platformfrom Homepage:

This Multiple Classic Computer Platform lets dreams come true.

The Classic Computer and Classic Arcade fans are just waiting for a device which allows them to go back to the good and easy operation and gaming experience from the past.

Many people still have unique software and programs which are still unbeatable when it comes to user friendliness. The reconfigurable and generic design will allow an easy switch between multiple different realizations and representations of classic computers.

When we look to the 80ies and 90ies, names like Atari ST, Sinclair’s ZX-Spectrum, Commodores VC20, VC-64 and the whole Amiga Series 500, 1000, 2000 come to mind.

main Features:

  • Old Joystick interfaces allow the usage of classic input devices.
  • A stereo/audio output allows the connection to each TV set, amplifier or computer monitor to explore enhanced sound.
  • Different versions for PAL and NTSC regions allow seamless usage and compatibility.
  • All this paired with the newest available hardware and new interface, like SD-Card, S-Video and RGB Output, improve the picture quality and the openness of the systems.
  • An internal memory enables the permanent storage of favorite games and applications, the menu overlay allows for easy selection of the application or game and the desired Classic Computer.

source: arcaderetrogaming.com

Lemonade for VIC-20 (require 16k memory expansion)

July 26th, 2009 No comments

LemonadeThis is a Conversion from Commodore 64 of a classic Lemonade Stand managing game. Your goal in this fun little game will be to make as much money as you can within the 12 summer weeks.

Play it in 40 columns!

source: Denial (The Commodore VIC-20 forum)

Gideon working on a successor of the “1541 Ultimate” cartridge

July 23rd, 2009 No comments

1541 Ultimatefrom 1541 Ultimate homepage:

Some of you might have noticed that the order form has been temporarily closed, and many questions and rumours have been going around about the future of the 1541 Ultimate. The reason behind all this, is that behind the screens I have been working on a successor of the “1541 Ultimate”. How this unit will be called has not yet been determined, but it could be something as simple as “1541 Ultimate II” or “Ultimate Cartridge”.

What is it, and why was it designed? Basically, it is a scaled down version of the 1541U. It will provide similar functionality, although some things have been changed. It will no longer support full-size SD-cards, but only MircoSD, or “Transflash”. Also, Ethernet will not be supported until further notice. It will support tape emulation out of the box (without the need for special FPGA images) and it will provide a real-time clock function with battery back up. Audio output has been significantly improved, which might seem useless for just the drive sounds, but this enables the creation of FPGA images that provide additional sound channels of useful quality. The power consumption has been reduced as well. There is one extra cool feature that will not yet be disclosed ;-)

And last but not least… This unit will come with a case! At least, that is the plan; there are some negociations going on with manufacturers for plastic insertion moulding. It seems feasible to have this done, although it’s pricy for low quantities. A prototype is 3D-printed this week; the prototype board is already there and functional.

source: 1541ultimate.net

Sinclair ZX81 + 16k RAM pack

July 23rd, 2009 1 comment
Sinclair ZX81 Action Pack

Autopsy:

from Wikipedia:

The Sinclair ZX81 was a home computer released in 1981 by Sinclair Research. It was the follow-up to the Sinclair ZX80. The machine’s distinctive appearance was the work of industrial designer Rick Dickinson.

Video output, as in the ZX80, was to a television set, and saving and loading programs was via an ordinary home audio tape recorder to audio cassette. Like its predecessor it used a membrane keyboard. Timex Corporation manufactured kits as well as assembled machines for Sinclair Research.

In the United States a version with double the RAM and an NTSC television standard was marketed as the Timex Sinclair 1000.

source: wikipedia

Sinclair (Amstrad) ZX Spectrum +3 with Floppy disk / RGB / DivIDE

July 19th, 2009 1 comment
ZX Spectrum +3 / Floppy / Joystick SJS 1 / PowerSupply

Autopsy:

from Wikipedia:

The ZX Spectrum +3 looked similar to the +2 but featured a built-in 3-inch floppy disk drive (like the Amstrad CPC 6128) instead of the tape drive, and was in a black case. It was launched in 1987, initially retailed for £249 and then later £199 and was the only Spectrum capable of running the CP/M operating system without additional hardware.

The +3 saw the addition of two more 16 KB ROMs. One was home to the second part of the reorganised 128 ROM and the other hosted the +3′s disk operating system. This was a modified version of Amstrad’s AMSDOS, called +3DOS. These two new 16 KB ROMs and the original two 16 KB ROMs were now physically implemented together as two 32 KB chips. To be able to run CP/M, which requires RAM at the bottom of the address space, the bank-switching was further improved, allowing the ROM to be paged out for another 16 KB of RAM.

Such core changes brought incompatibilities:

  • Removal of several lines on the expansion bus edge connector (video, power, and IORQGE); caused many external devices problems; some such as the VTX5000 modem could be used via the “FixIt” device
  • Dividing ROMCS into 2 lines, to disable both ROMs
  • Reading a non-existent I/O port no longer returned the last attribute; caused some games such as Arkanoid to be unplayable
  • Memory timing changes; some of the RAM banks were now contended causing high-speed colour-changing effects to fail
  • The keypad scanning routines from the ROM were removed
  • move 1 byte address in ROM

Some older 48K, and a few older 128K, games were incompatible with the machine.

The +3 was the final official model of the Spectrum to be manufactured, remaining in production until December 1990. Although still accounting for one third of all home computer sales in the UK at the time, production of the model was ceased by Amstrad at that point.

source: wikipedia divide homepage divide forum

ZX Spectrum +3 / RGB with DivIDE Interface

July 19th, 2009 1 comment