A new version of the firmware for the Ultimate-64 by Gideon is released.
Changelog:
- Sprite Collisions.
- Illegal graphics fetches.
- Sprite DMA timing.
- Nuvie Player.
- NMI handling improved in 6502.
- Illegal reads when BA=0 masked out (“PLA” issue)
- Added debounce on Restore Key.
- KCS power cart fixed (sprite graphics error)
- HDMI/DVI Compatibility.
.. and there are many improvements not present in the changelog.
Download: Ultimate-64 Firmware Core v1.02 (847)
source: ultimate64.com
Vampire GOLD2.9 Core Released for V600 v2 & V500 v2(+) and new Saga Driver v1.3
Vampire GOLD2.9 Changelog:
- Improved Power-OFF/ON on Amiga
- Allow software to access on-board ROM chip
- MapROM mapping support for Atari roms
- Memory management support for Atari memory map
- FPU Speed-up (51Mflops at x11 according to SysInfo)
- FPU fully working under TOS
- Modified Expansion post pin-out
- Boot to EmuTOS with FIRE button on Power-ON
SAGA Driver v1.2/1.3 Changelog:
- Updated VControl to 1.4
- Added V2ExpEth.device 1.2
- Updated SDNet.device to 1.2
- Some more work on TX stability
- Should recover from ENC Module hangs more often
- Aligned with future EXPnet
Download: Vampire Core & Saga Driver (1233)
source: apollo-accelerators.com
This is the official demo party results from Revision 2018. See also the CSDB Revision 2018 section for more informations.
C64 4K Intro:
- 7 – Prutske by Royal Belgian Beer Squadron
Mixed:
- 5 – Midnight Tryst by Lft (Graphics)
- 9 – Huhu from Space by Titus (Graphics)
- 10 – The Kids are Allright by Titus (Graphics)
- 12 – Sailing the Revision Seas by Oemfoe (Graphics)
Mixed Graphics:
- 6 – Android Runner by Rabenauge
- 9 – Eha@eWerk by Abyss Connection
- 11 – The Tree by Nodepond
Mixed Music:
- 1 – LiSUterine Taste [2sid] by Factor6
- 2 – Could Be Cool by Censor Design, MultiStyle Labs
- 10 – Get Up and JUMP! [2sid] by Unreal
- 13 – Schmissiger Schiss by AttentionWhore
Mixed Demo:
- 1 – We Come in Peace by Censor Design, Fairlight, Offence
- 5 – TV-One by One
- 9 – Hello C64 by Methos
Mixed Game:
- 1 – Crank Crank Revolution by Lft, redcrab
Productions released outside compos:
- Petscii Choir (Graphics)
- Snek +1 by Bad Taste (Crack)
Download: Revision 2018 Party stuff (896)
source: 2018.revision-party.net
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports: + many more….
USB Stick STM32 (Gotek) HxC Firmware v3.1.16.1a -> v3.1.22.1a cumulative changelog:
- TI99/4A : Direct support of *.DSK/*.PC99/*.V9T9 sectors dump images SD/DD/HD density support (Read & Write).
- New embedded menu entry : You can now force the user interface mode (Normal/Indexed or selector mode selection).
- USB Direct Access mode code : Index gap increased (Amiga File selector & HxC copy utility under WB fix)
- Indexed mode : Ignore file extension. You can now use any file extension as long as the file is supported by the floppy emulation engine. (Can be DSKA0000.HFE/IMG/DSK/ADF/ADL…)
- Acorn machines (*.ADL, *.ADM, *.ADF): Sectors gap, interleave and tracks skew aligned to the real machine.
- USB Direct Access mode code refactored : Read/write performance increased (hxcmount). / Command/Write indications printed on the LCD.
- USB access cache : Write timeout value set to 2 seconds.
- Normal mode : Remove unwanted key delay when entering in direct mode.
- End part of the read output pipeline reworked (pulses generator).
- Akai S20 IMG images : sectors gap and tracks skew aligned to the real machine.
- Casio FZ1 IMG images : sectors gap and tracks skew aligned to the real machine.
- Fix last the v3.1.16.2a compilation option ! Please update if you have the v3.1.16.2a released yesterday !
- Autoboot mode + 3 Digits Gotek screen : Fix slot number.
This is only a little part of the changelog. The original one is very long and you can read it here. (instruction manual here)
Download: USB Stick STM32 (Gotek) HxC Firmware v3.1.22.1a (964)
source: hxc2001.com
A new version of the firmware for the interface 1541 Ultimate II+and 1541 Ultimate II is released.
Release notes Ultimate-II & II+ v3.2a:
- Improved DHCP.
- SIDFX support in SID player.
- FC3 and FC3+ Support improved.
- Saving to TAP files repaired.
- Many Ultimate 64 related changes.
Note: On the 1541 Ultimate II (non plus), there is an issue with using DHCP for the Ethernet Adapter. May may want to avoid using DHCP on the 1541 Ultimate II (non plus).
How to update?
- For the 1541 Ultimate-II:
- Navigate to the unzipped file ‘3.2a_180322.audio.u2u‘ or ‘3.2a_180322.dualdrive.u2u‘ and select “Run Update”
- For the 1541 Ultimate-II+:
- Navigate to the 3.2a_180322.u2p file, and select “Run Update”.
Download: 1541 Ultimate-II / Ultimate-II+ v3.2a (1030)
source: facebook.com 1541ultimate.net github.com
NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
- IK Ultimate Competition Edition +D
- Jake the Snake V4.0
- Tass Times in Tone Town [1581]
- Combat Crazy
- Target Renegade [easyflash]
- Another World [easyflash]
- Zork III (Proportional Font)
- Arcade Game Construction Kit
- Tetris MP V1.2
- Lords of Doom [easyflash]
- Enchanter (Bold Font)
- Alienstorm [easyflash]
- Tetris MP V1.2 +F
- Star Toast
- Star Toast +2H
- Puzznic +3P
- The Chicken Choker +2
- Digger Preview
- Athanor [easyflash]
- Indeflataball +7HF
- Hessian V1.2
- Snow Preview +
- Quad Core C64
- Fart Escape
- F-14 Tomcat [easyflash]
- Fart Escape +4
- Neuromancer [georam]
- Snow Preview
- Quad Core +5D
- L.O.V.E. Preview +4D
- Labyrinth [easyflash]
- Moonspire: The Draxx War – Preview +6M
- Japanese Pinball
- Flipper Giapponese
- Lemonade Stand
- Tass Times in Tone Town [easyflash]
- Digger Preview 2 +3
- SWIV [easyflash]
- Skate or Die [easyflash]
- Digger Preview 2 +2
- The Games Summer Edition [easyflash]
- Aliens [easyflash]
- Mini Putt +D [easyflash]
- Skate or Die
- The Last Hugger [seuck]
- Peter Pack Rat +5DGHF
- Snow Preview 3 +2
- Katakis
- Hermetic +5DT
- Aussie Games
- Enforcer [easyflash]
- Arcade Game Construction Kit
- The Games Winter Edition [easyflash]
- The Tracer Sanction [1581]
- Diced-64
- Atom Heart [seuck]
- The Last Hugger – RX Version [seuck]
- The Last Hugger RX +3DH [seuck]
- Iron Lord [easyflash]
- Defender of the Crown [easyflash]
- Explorer +4T [english]
- Diced-64 +2MD
- Jetpac Wars +2F
- The Tracer Sanction [1581]
Download: All Games in One Archive (5887)
source: csdb.dk
Phase5 CyberStorm MK2 @ 100Mhz (040 Hack – Stable)
This is a simple hack to overclock the Cyberstorm MK2 at 100Mhz without needed adapters or simply replacing the oscillator which causes instability or malfunctions.
The hack consists downgrading the Cyberstorm MK2 to 040 simply by moving the two resistors can you see marked in the photos.
For some CPU or MK2 models it is also advisable to replacing the original voltage regulator LT1085CM at 3.3v with this one LT912CM 3.5v but if the amiga is stable after hours of operation you can also avoid the replacing the voltage regulator.
Gallery of the work done:
source: Cosmos Blog
Commodore Amiga 4000 – 64Mb Fast Memory Hack.
The Amiga 4000 motherboard can be ´hacked´ to handle 64Mb of Fast Memory (4 SIMM modules of 16 MB each)
To do this, you have to solder a new GAL and make some bridges between FASTRAM SIMM -> GAL -> CHIP RAMSEY.
This work is not complicated but you need to have a good practice with the soldering iron and PLCC soldering.
Gallery of the work done:
Download: Amiga 4000 64Mb Hack (1577)
source: Cosmos Blog John Hertell Blog
Upgrading Commodore A3640 CPU Card (part two)
I have replaced the CPU 060 EC version with a 060 FULL with FPU REV 1.
When using the adapter with a non EC version of the 060 you must also use a fixed version of the kickstart v3.1 with the exec.library modified to support the FPU.
Gallery of the work done:
Download: Kickstart v3.1 Exec Patch Version for 3k & 4k - Ready to Burn! (1509)
Upgrading Commodore A3640 CPU Card (part one)
Works that have been done:
- Upgrading GAL (U204 & U209)
- Socket for Oscillator.
- Overclocking.
- Replacing all capacitors (the recap was already done but for the CPU adapter 040 -> 060 was necessary use smd capacitors for the little space available)
- CPU Adapter 040 -> 060.
- CPU Motorola 68EC060
Gallery of the work done:
Commodore Amiga 4000 repair with Floppy Drive that is not recognized.
Defect:
- Floppy Drive Dead (not recognized)
Repair:
Gallery of the work done:
Vampire GOLD2.8 Core Released for V600 v2 & V500 v2(+)
Vampire GOLD2.8 Changelog:
- Improved HDMI DMA support for misaligned screen pointers.
- Minor FPU fix.
- A500 RTC fix (V500).
- Improved SDCard/SDNet support.
- V500 V2+ Expansion port enabled.
SAGA Driver v1.1 Changelog:
- Updated VampireGFX.card to 1.12
- Adds Scanlines settings.
- Assumes SOFTSPRITE=YES by default if not set in tooltypes.
- Updated SDNet.device to 1.1.
- Added VampireGFX tooltypes documentation.
Download: Vampire Core & Saga Driver (1243)
source: apollo-accelerators.com
Commodore Monitor 1084S-P Repair.
Defect:
- Completly dead with only a loud whistling noise in background.
Repair:
- Replaced the flyback transformer (AT2079/30102) everything has started to work perfectly.
- It’s mandatory to made a calibration of the SCREEN and FOCUS with the two trimmer placed on the rear side of the flyback transformer.
Note:
A loud whistling noise indicates a bad flyback transformer (also known as an LOPT).
Gallery:
Download: Commodore Monitor 1084S-P Schematics (1128)
This is the official demo party results from BCC #12. See also the CSDB BCC #12 section for more informations and download.
C64 Demo:
- 1 – Psychedelic Delicacy by Delysid
- 2 – The New Ninja Skateboarders of Death by The New Ninja Skateboarders of Death
- 4 – Honey by Atlantis
C64 Music:
- 1 – $50 Shades of Gradius by c0zmo
- 2 – Ibiza Sun [2sid] by GI-Joe
- 3 – We Hover Do You Feel That by G-Fellow
- 4 – Rain of Castamere by Kompositkrut
- 5 – Redshift by Toggle
- 6 – For BCC#12 Invitation by Sonki
- 7 – BCC12 by Sonki
- 8 – Eine Kleine Popmusik by Røly
- 9 – Migraines Revenge by Gaetano Chiummo
- 10 – The Courier Remix by Uctumi
C64 Graphics:
- 1 – Neonscape by Luisa/Oni
- 2 – Ein Tag im Meer by Baracuda
- 3 – Ghost by Fabs/Salvo Bee
- 4 – Fire and Fury by Nero
- 5 – Abstract Rotation by Informer
- 6 – Monsta by Salvo Bee
- 7 – Fun and Run by Informer
- 8 – Haruko and Ayako by Luisa/Oni
Mixed:
- 1 – Game Art Beyond by Bliss (Graphics Collection)
C64 Fast Intro:
- 1 – Monitori Te Salutant II by Brainstorm
- 2 – Courier Intro by Hokuto Force
- 3 – Party-Part by Atlantis
- 4 – Kraut54147 by Mayday!
Productions released outside compos:
- Eliminator Remix (Music)
- Pains ‘n’ Aches +8D Trainer by Excess (Tool)
- Puzznic +3P (Crack)
- The Chicken Choker +2 by Aldi Industries (Crack)
Download: BCC #12 Full Party Stuff (1075)
source: csdb.dk
Vampire GOLD2.7 Core Released for V600 v2 & V500 v2(+)
Vampire Changelog:
- Added fully pipelined hard FPU with peak 78 MFlops
- Added native support for all 68882 FPU operations without need of extra libraries
- Added new high performance memory controller, reaching 600MB/sec memory speed
- Added MapRom support
- Added Workbench Hardware Sprite support
- Added Scanlines optional mode for retro look of games on HDMI output
- Added RangerMem (A500 slow memory) for better compatibility with some old games/demos
- Added new boot picture
- Improved MPU (memory protection) with catching memory access error Enabled
- Improved AMMX2 instruction set with acceleration features for Video decoding, Image Decoding, 2D-games, 3D-games
- Improved WHDLOAD compatibility
- Improved Faster Boot time
SAGA Driver Changelog:
- Added VControl 1.1 (replace VampireTool)
- Updated SAGA driver installer
- Updated SDNet to 1.0 (Bax)
- Improved VampireGFX performance with AMMX (Bax)
- Complete VampireGFX driver rewrite in ASM (flype)
Download: Vampire Core & Saga Driver (1205)
source: apollo-accelerators.com
Recent Comments