Archive

Author Archive

RETRO Innovations (JIM Brain) – 6540 Rom Adapter & Short IEC Cable

August 23rd, 2013 No comments

I bought a few things from the site Retro Innovations of Jim Brain.

6540 Rom Adapter:

  • This PCB converts the MOS 6540 DIP pinout to a JEDEC standard 2764-27512 EPROM pinout.  The optional 5 upper address lines are available via pads complete with provision for pullup resistors (10K).

Commodore IEC Disk Drive Cable:

HxC Floppy Emulator: firmware (fat) v1.8.2.30 / (slim) v2.1.2.30

August 23rd, 2013 No comments

The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.

The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).

There are two differents emulators:

  • A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
  • A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.

Changelog SD HxCFloppyEmulator v1.8.2.30 (fat) & v2.1.2.30 (slim):

  • SDCard Support : Delay added right after any command (PNY microSD support).
  • Watchdog delay changed to 16s.
  • Brownout reset setting changed.

Download:

source: hxc2001.free.fr

Categories: Firmware, News & Rumors, Today

Vtech Genius IQ 128

August 23rd, 2013 3 comments
Vtech Genius IQ 128

Autopsy:

The Genius PC is a home computer from VTech. Released in the late 90s, it is one of the last microcomputers.

This computer have different names in each country, making it even harder to track down the information.

  • France : VTech Genius PC
  • Germany : VTech Genius IQ 128 and VTech TV 512
  • UK : VTech IT Unlimited
  • USA : VTech Precomputer Unlimited
  • Also mentioned on the french packaging : Switzerland, the Netherlands, Canada.

Hardware:

  • Motorola MC68EC000, 16-bit external databus, 32MHz
  • 256K of RAM
  • 2M of ROM – Sharp LH537NWN mask ROM
  • Mass storage : 128KB flash memory – AM29F010
  • Cartridge port, apparently on memory bus with system ROM and storage flash. The french system comes with cartridges only containing straps, likely shorting some pins enable extra features…

Downlod: VTECH Unlimited Manual (1609)

Hardware Video Review:

source: pulkomandy.tk/projects/avrstuff/wiki/geniuspc

CBM FileBrowser v1.6 by NBLA000

August 21st, 2013 1 comment

This program works as a program launcher for Commodore machines. Even if it was originally intended for a device with sd2iec firmware, it works also with any CBM drive (without sd2iec functions of course).

It is a multi-system version derived from the discontinued sd2brwse v.0.6 by Hannu Nuotio (fork() of sdbrowse v.0.7)

The Vic-20 Mega-Cart Installer is based on sys.asm sources of mega-tools by Daniel Kahlin, sort routine by Michael Kircher.

Current supported machines:

  • C64.
  • C64DTV.
  • Vic-20 unexpanded.
  • Vic-20 +3K RAM.
  • Vic-20 +8K RAM or plus (for FE3 use this version)
  • Vic-20 with Mega-Cart.
  • C16 / C116 / Plus4.
  • C128 in 64 mode.
  • C128 80 Columns.

Tested drives:

  • MMC2IEC
  • SD2IEC
  • uIEC
  • C64-SD (any version, with ITS modules too)
  • 1541 (with JiffyDOS too)
  • 1541-II
  • 1571
  • 1581

Changelog:

  • v.0.1 – 01-Sep-2009 (Start of project, C64/C64DTV only)
  • v.0.2 – 21-Oct-2009 (First working version for Vic-20 +8K RAM)
  • v.0.3 – 06-Jan-2010 (Added memory config auto-detection for Vic-20 selected program)
  • v.0.4 – 19-Jan-2010 (Added support for Vic-20 with Mega-Cart and manual start mode)
  • v.0.5 – 10-Feb-2010 (Added support for Vic-20 unexpanded and Vic-20 +3K RAM)
  • v.1.0 – 05-Mar-2010 (First public version, minor issues fixed, C64 and Vic-20 supported)
  • v.1.1 – 22-Jun-2010 (Added support for D41 and DNP file images, sd2iec firmware v.0.9.0 or higher required)
  • v.1.2 – 09-Oct-2010 (Added SJLOAD speed-up option to the manual mode of the Mega-cart version)
  • v.1.3 – 31-May-2012 (Added support for C16/C116/Plus4, Sort directories, cosmetic changes)
  • v.1.4 – 19-Jul-2012 (Added JIFFYDTV speed-up support for C64-DTV, Clear screen before RUN)
  • v.1.5 – 03-Mar-2013 (Added support for C128, and uppercases disk images D64,D81,D71 etc.)
  • v.1.6 – 20-Aug-2013 (Added support for Tap files using ITS modules, case insensitive disk images Dnp, TaP, m2I etc.)

Download: CBM FileBrowser v1.6 (3601)

source: vic20.it/cbmfilebrowser

C64 Game: Pimple Panic Pre / Motor Massacre / Road Raiders 101% …

August 19th, 2013 No comments

HxC Floppy Emulator: firmware (fat) v1.8.2.26 / (slim) v2.1.2.26

August 19th, 2013 No comments

The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.

The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).

There are two differents emulators:

  • A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
  • A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.

Changelog SD HxCFloppyEmulator v1.8.2.26 (fat) &  v2.1.2.26 (slim):

  • Device init : the whole internal memory is now cleared at power-up.

Download:

source: hxc2001.free.fr

Categories: Firmware, News & Rumors, Today

ASAP v3.1.5 – Another Slight Atari Player

August 18th, 2013 No comments

ASAP is a player of 8-bit Atari music for modern computers and mobile devices. It emulates the POKEY sound chip and the 6502 processor.

The project was initially based on the routines from the Atari800 emulator, but the current version has a completely new original emulation core.

Changelog ASAP 3.1.5 (2013-08-17):

  • Android: fixed playback on Android 4.1+, disconnecting headset pauses playback, updates position and avoids “process not responding” during seek, starts in root directory if there’s no memory card.
  • GStreamer plugin gets autoplugged (read: SAPs play in GStreamer-based players).
  • WASAP plays music to its very end.
  • Fixed crash on malformed RMT files.
  • Restored Audacious 2.x compatibility.
  • DEB packages.
  • foobar2000 `*.fb2k-component` package.

Download: ASAP v3.1.5 (1385)

source: asap.sourceforge.net

Eprom Motorola MCM68766C replaces the C64/VIC-20 Rom

August 16th, 2013 No comments
Promenade C1 Eprom Burner

If you are the lucky owners of these eprom: Motorola MCM 68766C you can do something really cute, hardware permitting. Example: use this EPROM like a ROM for some Devices and Computers Commodore without using an adapter ;-D

I had to use the EPROM programmer Promenade C1 for Commodore 64 to burn these eprom because all my programmers don’t support these type of eprom.

Download:

HxC Floppy Emulator: Firmware Slim Version v2.1.2.24

August 15th, 2013 No comments

The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.

The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).

There are two differents emulators:

  • A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
  • A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.

Firmware Slim SD HxCFloppyEmulator v2.1.2.24:

  • SD Access enhanced : Better handling, track buffer size increased.
  • Floppy interface mode enhanced : New Pin02/Pin34 Custom settings.
  • SDCard file system support enhanced : Now support FAT 12, FAT 16 & FAT 32 formatted SDCard ! Any SDCard size are now supported !
  • Direct access mode : New function to get and set easily the current index number in “file selector” & indexed mode.
  • Lots of internal code optimizations/improvements and corrections…
  • Write Support completely redesigned / reworked :
  • Low level track format support added !:
    • The host computer/machine can now do low level format of the disk images ! By this way the floppy disk image can be formatted with the right disk layout from the machine. All the tracks parameters used by the machine (sector size, interleave/skew, gap, format value, index mark…) will be written to the virtual disk tracks ! By this way the user have just to copy some blank HFE images to the SDCard, and format them with the host machine as with a real floppy disk to make them usable. Some blank disk images with various density will be available for download on the HxC2001 website.
    • SD/DD/HD sector write support : all sector sizes are now supported ! : 128B, 256B, 512B, 1024B, 2048B, 4096B, 8192B…
    • Unaligned track/sector write is now possible : Sectors of host formatted images and images imported from stream files (Kryoflux…) can now be written !

Download:

source: hxc2001.free.fr

Categories: Firmware, News & Rumors, Today

FPGA Arcade new Homepage

August 15th, 2013 No comments

For retro computing fans, arcade enthusiasts and fpga developers, newbies and experts. The replay will let you relive and revive classics or develop new tech.

source: fpgaarcade.com

Categories: Event(s), News & Rumors, Today

New Donation: Microsoft Xbox (chipped) + RGB + Compatible Joypad

August 14th, 2013 No comments
New Donation - Microsoft Xbox (chipped) + RGB + Compatible Joypad
I thank my dear friend for the donation of the Microsoft Xbox (chipped) + RGB Video Cable and a Compatible Joypad

HxC Floppy Emulator: Firmware v1.8.2.24

August 14th, 2013 No comments

The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.

The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).

There are two differents emulators:

  • A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
  • A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.

Download:

Firmware SD HxCFloppyEmulator v1.8.2.24:

  • Write Support completely redesigned / reworked :
    • Low level track format support added!
    • The host computer/machine can now do low level format of the disk images !
    • By this way the floppy disk image can be formatted with the right disk layout from the machine.
    • All the tracks parameters used by the machine (sector size, interleave/skew, gap, format value, index mark…)
    • will be written to the virtual disk tracks !
    • By this way the user have just to copy some blank HFE images to the SDCard, and format them with the host machine
    • as with a real floppy disk to make them usable.
    • Some blank disk images with various density will available for download on the HxC2001 website.
    • SD/DD/HD sector write support : all sector sizes are now supported ! : 128B, 256B, 512B, 1024B, 2048B, 4096B, 8192B…

    Read more…

Categories: Firmware, News & Rumors, Today

Apple Monitor // (A2M2010P)

August 14th, 2013 2 comments
Apple Monitor II (front)

Autopsy:

I have removed the main filter capacitor of 0,47μF 250v (RIFA), avoiding that can explode.

from Wikipedia:

The Apple Monitor // was a CRT-based green monochrome 12-inch monitor manufactured by Apple Computer for the Apple II personal computer family. Apple didn’t manufacture the monitor until halfway through the lifespan of the II series.

The business-line Apple /// had its own Apple Monitor /// long before. Many home users of Apple II computers used their televisions as computer monitors before the Monitor // was released. It featured an inner vertical-swiveling frame. This allowed users to adjust the viewing angle up or down to suit their taste without the addition of a tilt-and-swivel device.

The Monitor // was widely adjustable for the time, as it included adjustments for the size and location of the image on the screen. These adjustments had a very small influence on the picture, however, much to the disliking of some users. The Monitor // was designed for the Apple II+, but was used widely throughout the Apple II product line, most recognizably on the Apple IIe.

Download:

source: wikipedia

C64SD V2 Infinity + ITS firmware update v0.10.3.8

August 14th, 2013 No comments
ITS TAP Module

A new version of the firmware for the interface C64SD Infinity + ITS Module by Manosoft is released.

Changelog:

  • Added support for the long filenames and the ones containing special characters.

Download: C64SD Firmware v0.10.3.8 (1440)

source: manosoft.it

Categories: Firmware, News & Rumors, Today

Restoration and Repair of a Sinclair Spectrum 128k +2A Arabic Version

August 11th, 2013 4 comments
Sinclair Spectrum 128k +2A (Black) Arabic Version

Autopsy:

This is the translation of the Arabic boot screen:

© 1987, 1988 Sinclair of Egypt
presented by Matsico Corp, an authorized dealer of Sinclair & Amstrad in Egypt
prepared by Dr. Nabil Nazmi
(Version 3)

The computer is arrived in pitiful condition. The inside of the computer and the keyboard were are full of sand and dirt.

Restoration and repairs that have been made:

  • Replaced the top case with a new one.
  • Replaced the bottom case with a new one, then replaced again with the old one to keep the original appearance. (the hole for the switch is standard in the Arabic version)
  • Replaced the tape recorder.
  • Replaced the motherboard with a issue #2 instead of issue #1 (was not convenient the repair)
  • Cleaned all keys and membrane.
  • Replaced all rusty springs of the keyboard.
  • General cleaning.
  • Moved the ROM/EPROM mod on the new motherboard.
  • Replaced the original switch with a new one, then replaced again with the old one to keep the original appearance.

from Wikipedia:

The ZX Spectrum +2 was Amstrad’s first Spectrum, coming shortly after their purchase of the Spectrum range and “Sinclair” brand in 1986. The machine featured an all-new grey case featuring a spring-loaded keyboard, dual joystick ports, and a built-in cassette recorder dubbed the “Datacorder” (like the Amstrad CPC 464), but was in most respects identical to the ZX Spectrum 128. The main menu screen lacked the Spectrum 128′s “Tape Test” option, and the ROM was altered to account for a new 1986 Amstrad copyright message. These changes resulted in minor incompatibility problems with software that accessed ROM routines at certain addresses. Production costs had been reduced and the retail price dropped to £139–£149.

The new keyboard did not include the BASIC keyword markings that were found on earlier Spectrums, except for the keywords LOAD, CODE and RUN which were useful for loading software. This was not a major issue however, as the +2 boasted a menu system, almost identical to the ZX Spectrum 128, where one could switch between 48k BASIC programming with the keywords, and 128k BASIC programming in which all words (keywords and otherwise) must be typed out in full (although the keywords are still stored internally as one character each). Despite these changes, the layout remained identical to that of the 128. The ZX Spectrum +2 power supply was a grey version of the ZX Spectrum+ and 128 power supply.

The ZX Spectrum +2A was a variant of the Spectrum +3 housed a black version of the Spectrum +2 case mouldings. The Spectrum +2A/+3 motherboard (AMSTRAD part number Z70830) was designed such that it could be assembled without the floppy disk controller or associated logic and a +2 style “datacorder” connected. Originally, Amstrad planned to introduce an additional disk interface for the +2A/+2B called the AMSTRAD SI-1, however this never appeared. If an external disk drive was added, the “+2A” on the system OS menu would change to a +3.

The power supply of the ZX Spectrum +2A used the same pinout as the +3. However, the power supply purchased with the +2A/B had “Sinclair +2″ written on the case.

source: wikipedia