Atari The Educator

The package includes:

• Basic Cartridge.
• Software & State Capital software on tape.
• The Program Recorder Atari 410.

Download: Atari Educator Owners Guide (1790)

Atari 1025 80-Column Printer

Printer Specifications:

• 40 cps (80-column 10 cpi mode)
• 5 cpi expanded (40 col), 10 cpi (80 col), 16.7 cpi condensed (132-col)
• 5×7 character dot matrix.
• Buffer: 132 chrs at 16.7 cpi, 80 chrs at 10 cpi.
• Paper: roll,fanfold,single sheets. optional:roll paper holder, tractor feed.

Atari 1030 Modem

With the introduction of Atari all new XL line of computers came the all new Atari 1030 direct connect modem. The modem had a very unique feature packed into it. Just like the Atari 850 interface, the Atari 1030 modem had not only its device driver in ROM which would automatically upload into the computers memory, but also its software as well.

The Atari 1030 came with an on-board software package called ModemLink which would automatically upload into the computers memory. However there was a catch, like all previous Atari software, ModemLink had no provisions for Uploading or Downloading software, also in order to use the on-board ModemLink software any disk drives that were connected to your system had to be turned OFF.

Later Atari 1030′s were packaged with “The New Atari 1030 Software Package” which was a diskette with Amodem, Tscope and DiskLink software. Amodem was written by Jim Steinbrecher of Atari telecom fame, Tscope was written by Joe Miller and was for use with Compuserve.

Gallery:

source: atarimuseum.com

Gallery:

The HP-67 was a magnetic card-programmable handheld calculator, introduced by Hewlett-Packard in 1976 at an MSRP of $450. A desktop version with built-in thermal printer was sold as the HP-97 at a price of $750.

Marketed as improved successors to the HP-65, the HP-67/97 were based on the technology of the “20-series” of calculators (HP-25, HP-19C etc.) introduced a year earlier. The two models are functionally equivalent, and programs on magnetic cards can be interchanged between them.

Features:

The 67/97 provide a complete set of scientific, statistical and engineering operations, including trigonometrical, logarithmic and exponential functions, coordinate conversions, average/deviation etc.

The HP-67/97 series featured a program memory of 224 eight-bit words. The two extra bits per word compared to the HP-65′s six allowed the designers to store any program instruction in a single memory cell (“fully merged keycodes”) even if it required multiple keystrokes to enter (see image). Programs could include 20 labels, subroutines (3 levels deep), four flag registers, 8 comparison functions, and extended index and loop control functions.

At 15 digits, the display was wider than those of the predecessor models, although the decimal point was displayed on its own digit position. The HP-67 keys carry up to four functions each, accessed through “f”, “g” and “h” prefix keys (gold, blue and black labels, respectively). The model 97 had more (and larger) keys, therefore only two functions were assigned to each key. When interchanging magnetic cards between the HP-67 and the HP-97, the calculators’ software took care of converting the key codes, and emulated the 97′s print functions through the 67′s display.

The HP-67 is powered by a pack of three AA-sized nickel-cadmium rechargeable batteries. Owing to the power requirements of the built-in thermal printer, the HP-97 employs a larger battery pack and more powerful charger.

Memory and programming:

Of the 26-register data memory, the first ten (“primary registers”) could be accessed directly, ten more as an alternate register set, and the remaining six had special functions for statistical operations and as an index register. Using the latter, a program could access all 26 registers as a single indexed array. Data memory is not permanent as in later models, i.e. register contents and program are lost when powering off.

The built-in magnetic card reader/writer could be used to save programs and data, with the ability to combine data from multiple cards. The same magnetic card format was later used for the HP-41C which offered compatibility to the 67/97 through software in the card reader. HP offered a library of programs supplied on packs of pre-recorded magnetic cards for many applications including surveying, medicine, as well as civil and electrical engineering.

In addition to software and support from HP, an active user community supported the HP67/97 as well as the other HP programmables of the era. The group was called PPC and produced the PPC Journal. One of the notable contributions of the group was the development of a “Blackbox” that allowed pseudo-alphanumeric displays.

Gallery (Before cleaning):

Gallery (Replacement Drive wheel & Battery):

Gallery (Under the Cover):

Download:

• Hewlett-Packard HP-97 Journal 1976 (1972)
• Hewlett-Packard HP-97 Service Manual (2840)

source: wikipedia.com hpmuseum.org

For this donation i thank: Andrea C. from Trieste.

The Sharp PC-1360 is a small pocket computer manufactured by Sharp. it can also be considered as an electronic calculator.

The PC-1360 was introduced in 1987 and was used by engineers, and favored by programmers for its decent programming and graphical capabilities. It was the top model of the (very small, only two models) 13XX series. It has a LCD display with four lines, also the SC61860 CPU, two RAM extension slot which work with the cynox RAM cards, a 15 pin serial interface and also a powerful BASIC. This is the best models for graphic applications.

Gallery:

source: computinghistory.org.uk

For this donation i thank: Paolo Cognetti from Roma.

This is a 3rd generation pong color system. It uses the usual 10 games cartridge: Tennis, Hockey, Squash, Practice, Soccer, Basketball, Basketball Practice, Gridball, Traget 1 & 2.

You can find this system everywhere in Europe though it´s origin once was Hongkong. This is a color variant sold by Irradio in Italy.

Gallery:

source: pong-picture-page.de

I have repaired the Sharp Twin Famicom AN-500R for a dear friend.

Sharp Twin Famicom AN-500R Repair.

Defects:

• Black screen.
• Distorted sound.

Fix:

• Cold solder joints.
• Cleaning the volume slider on the second Joypad.

The microphone is mixed into the output signal, if the contacts of the volume slider are dirty you hear a background noise which disturbs the in game audio.

Gallery:

The Commodore 3040 it’s a dual drive 5¼” floppy disk subsystem for Commodore International computers. It uses a wide case form, and uses the IEEE-488 interface common to Commodore PET/CBM computers.

These drive models use a similar single density, single side floppy data storage format to that used by the Commodore 1541 drive, but with a slightly different data marker indicating which model originally formatted the disk. The low-level disk format was similar enough to allow reading between models, but different enough that one series of drive models could not reliably write to disks formatted with one of the other model series.

Gallery before cleaning:

Cleaning cover lock & replaced tantalum capacitors:

Gallery:

Download: CBM 2040-3040-4040-8050 Disk Drive Manual (2212)

source: wikipedia

The Macintosh Classic is a personal computer manufactured by Apple Inc.. Introduced on October 15, 1990, it was the first Apple Macintosh to sell for less than US$1,000. Production of the Classic was prompted by the success of the Macintosh Plus and the Macintosh SE. The system specifications of the Classic were very similar to its predecessors, with the same 9-inch (23 cm) monochrome CRT display, 512×342 pixel resolution, and 4 megabyte (MB) memory limit of the older Macintosh computers.

Apple’s decision to not update the Classic with newer technology such as a 68010 CPU, higher RAM capacity or color display ensured compatibility with the Mac’s by-then healthy software base as well as enabled it to fit the lower price Apple intended for it. Nevertheless, the Classic featured several improvements over the aging Macintosh Plus, which it replaced as Apple’s low-end Mac computer. It was up to 25 percent faster than the Plus and included an Apple SuperDrive 3.5-inch (9 cm) floppy disk drive as standard.

The Classic was an adaptation of Jerry Manock’s and Terry Oyama’s 1984 Macintosh 128K industrial design, as had been the earlier Macintosh SE. Apple released two versions that ranged in price from $1,000 to $1,500. Reviewer reactions were mixed; most focused on the slow processor performance and lack of expansion slots. The consensus was that the Classic was only useful for word processing, spreadsheets and databases. The price and the availability of education software led to the Classic’s popularity in education. It was sold alongside the more powerful Macintosh Classic II in 1991 until its discontinuation the next year.

Gallery:

Macintosh Classic reCap:

source: wikipedia

The Atari 8-bit family is a series of 8-bit home computers introduced by Atari, Inc. in 1979 and manufactured until 1992. All are based on the MOS Technology 6502 CPU running at 1.79 MHz, roughly twice that of similar designs, and were the first home computers designed with custom co-processor chips. This architecture allowed the Atari designs to offer graphics and sound capabilities that were more advanced than contemporary machines like the Apple II or Commodore PET, and gaming on the platform was a major draw – Star Raiders is widely considered the platform’s killer app. Machines with similar performance would not appear until the BBC Micro in late 1981 and the Commodore 64 in 1982.

The original Atari 400 and 800 models were released with a series of plug-n-play peripherals that used Atari’s unique “SIO” serial bus system. Over the following decade several versions of the same basic design were released, including the XL and XE series of computers and matching peripherals. All of these used the same basic logical design, with various changes to the physical layout to lower production costs as chipmaking and manufacturing processes improved over time. The early machines were expensive to build, but dependable. Later models like the XEs were greatly cost-reduced and generally not as robust. Sub-models of these later designs were sold into the eastern European market after sales of the main lineup had ended.

Overall, the Atari 8-bit computer line was a commercial success, selling two million units during its major production run between late 1979 and mid-1985, putting its sales on par with machines like the Sinclair ZX Spectrum and TI-99/4A. Its primary competition in the worldwide market was the Commodore 64, by far the best selling computer of the 8-bit era. Atari also found a strong market in Eastern Europe and had something of a renaissance in the early 1990s as these countries joined a uniting Europe. Some estimates place sales during this period at another two million units.

Atari 400 inside the package:

Package Contents:

• Atari 400 Home Computer.
• Manuals.
• External Power Supply.
• 48k Ram Expansion Kit (this one was added by me and not included in the original packaging)

Atari 825 – 80 Column printer:

Atari introduced with its Atari 400 and 800 series computers its first 80 Column printer.   The Atari 825 which actually a repackaged Centronics 737 printer.   Earlier models had limited capabilities, the later 825 models with the extended basic character set had the capability of producing the Atari ATASCII graphics character set.  The Atari 825 required the use of the Atari 850 interface module to allow it to communicate with the Atari 400 and 800 computer because it had a Centronic parallel interface on it instead of the Atari SIO interface which the Atari 820 and Atari 822 printers had built in.

The B Key 400:

The B Key 400 is a replacement keyboard for the keyboard membrane of the Atari 400.

Read more…

I have recovered this Terminal from the United States because it was in good condition and partially working.

The cleaning took more time of the repair. The repair was very simply. I have replaced for precaution all tantalum capacitors and i have also replaced the two micro switches that are completely rusted.

The main defect was caused by one of these two micro switches which was in short circuit always in one position. I have also made a calibration of the geometry of the screen that appeared incorrect and a focus adjustment.

Below i post all pictures of the cleaning, components replaced, various console test that i have made via terminal and two videos.

A brief introduction of the ADM-5 terminal:

The Lear Siegler ADM-5 was introduced in January, 1981 at a price of $995 and is based on the proven Lear Siegler ADM-3 design.

This new version includes:

• Numeric keypad.
• Reverse video.
• Reduced intensity video.
• Limited editing capabilities.
• Estension port.
• Lowercase display.

Lear Siegler (LSI) ADM-5 the final reult:

Replacing tantalum capacitors and mini switches:

Cleaning main pcb:

Radio Shack DT-1 (pcb) vs Lear Siegler ADM-5 (pcb):

Testing:

Video:

source:  BB ASCII Demo

Gallery:

The Dick Smith Wizzard (Creativision) Cassette Storage Module is a mass storage expansion for the Dick Smith Wizzard.

Using the Dick Smith Wizzard Basic allow you to load and save program which you enter in the computer. By recording a program on a tape, you can save it as permanent record. Later you can load the program from cassette tape into the computer’s memory if you want to use that program again.

Cassette Storage Module – Tape Loading:

source: madrigaldesign.it

Atari 800XL Upgrading.

Installation and preparing:

• VBXE v2.1 Interface Installation.
• Simple Stereo + U-Switch Installation.
• Formatting and partitioning CF Card (Sandisk ULTRA 2Gb) for the SIDE 2 Cartridge/SDX.

Software update:

• Update the Ultimate 1MB (First batch 2011) Flash AM29040BL.
• Update Ultimate 1MB (First batch 2011) Xilinx XC95144XL JTAG Firmware (v1 to v2)

Upgrade/Fix:

• Fixed some wrong connections of the old installation from the Ultimate 1MB to the Atari 800XL PCB.
• Removed the RF Modulator and installation of a Female DIN (8 pin + GND) for the RGB output + RGB CTRL + SYNC + AUDIO (Stereo)
• I have also made a cable from a male DIN (8 pin) to Scart, fully shielded of a four meters lengths.

All these interfaces can be purchased on the lotharek website.

Some photos of the installation:

12►

I must thank Andrea Pierdomenico for The original Black CD Caddy for Commodore CDTV.

The Creativision console was given to me on loan from a friend, Andrea Pierdomenico for testing the MultiROM v1.0 cartridge made by Treviso RC (Francesco Brolli)

I and Andrea we realized that the power supply was lost (tragedy). The original power supply of the CreatiVision uses 16v in AC 350ma and 9v in AC 1amp.

Here comes Ciro (Ninetyniner Iuc) that months ago gave me a transformer extirpated from a unknown motherboard and with a bit of fortune there are all voltages.

At this point, given the poor quality of the output video via antenna that comes with the Creativision i have decided to make the easy Composite Video/Audio mod and acting on the Trimmer (color gain) native on the PCB of Creativision i have reached a good quality of the image.

I must thank Andrea Pierdomenico, Ninetyniner Iuc and Francesco Brolli (Treviso RC) for the MultiROM Cartridge v1.0.

Gallery:

Gallery:

The Video Technology CreatiVision was a hybrid computer and home video game console introduced by VTech in 1981. The hybrid unit was similar in concept to computers such as the APF Imagination Machine, the older VideoBrain Family Computer, and to a lesser extent the Intellivision game console and Coleco Adam computer, all of which anticipated the trend of video game consoles becoming more like low-end computers.

The CreatiVision was distributed in many European countries, in South Africa, in Israel under the Educat 2002 name, as well as in Australia under the Dick Smith Wizzard name. Other names for the system (all officially produced by VTech themselves) include the FunVision Computer Video Games System, Hanimex Rameses and VZ 2000. All CreatiVision and similar clones were designed for use with PAL standard television sets, except the Japanese CreatiVision (distributed by Cheryco) which was NTSC and is nowadays much sought after by collectors.

The CreatiVision console sported an 8-bit Rockwell 6502 CPU at a speed of 2 MHz, 1KB of RAM and 16KB of Video RAM, and had a graphics resolution of 256 × 192 with 16 colors and 32 sprites. The console had 2 integrated joystick/membrane keypad controllers (much like the ColecoVision) which, when set in a special compartment on top of the console, could be used as a computer keyboard. The CreatiVision had interfaces for a cassette player, an extra rubber keyboard, floppy disk drive, parallel I/O interface, modem (likely unreleased), Centronics printer and one memory expansion module for use with the Basic language cartridge.

The CreatiVision was discontinued in late 1985/early 1986. A computer was produced by VTech in 1984-1986, based on CreatiVision hardware and compatible with most of the games: Laser 2001, which sold in Europe and Australia. It was also available in Finland through Salora, with the name of Manager. The Manager had a specific keyboard with Finnish layout and character set.

source: wikipedia

Cleaning Commodore CDTV Keyboard:

Gallery:

The Commodore CDTV Keyboard it’s nothing more than a Amiga 3000 keyboard, black with a different connector.