Archive

Archive for the ‘Retro Computers and other stuff…’ Category

SIO Tape Cable for Commodore

November 5th, 2010 No comments

This is a rare SIO Adapter cable. You can use it for connect the Atari 1010 Program Recorder on Commodore 64/128.

Lego Space Transport 918

October 28th, 2010 No comments

918 Space Transport is a Classic Space set released in 1978. It was one of the very first sets of LEGO Space. It contains a spacecraft piloted by a red Classic Space astronaut.

918 Space Transport is one of the first larger Classic Space sets. It lands on four landing “legs”. Space Transport has two sirens and a radio transmitter pole on top. It has a tail fin and a triangular shape.

The color scheme of the ship is blue, trans yellow, and gray. It has two compartments in the back, and a thruster in back.

source: lego.wikia.com wikipedia

SIP (Telecom) Phone country code prefix book

October 28th, 2010 No comments
SIP (Telecom) Prefix Book SIP (Telecom) Prefix Book

This is a old Phone country code prefix book by SIP (Società Italiana per L’Esercizio delle Telecomunicazioni p.a.) now Telecom Italia.

Apple IIc Monitor Model A2M4090Z

October 22nd, 2010 2 comments
Apple IIc Monitor (complete setup)

Autopsy:

Many thanks to Nilo for the Monitor.

This is the 9″ monochrome CRT display for Apple IIc, and the stand! Both are in great shape and the monitor works very well.

Commodore 1541 Single Floppy Disk (Boxed)

October 19th, 2010 No comments
Commodore 1541 Single  Floppy Disk (Boxed)

Autopsy:

Today i picked up a Commodore 1541 Single Floppy Disk with serial IEC / Powersupply cable, Manual and Test demo Disk in original Box and in good working condition.

Commodore 1351 Mouse for C64/128

October 6th, 2010 2 comments
Commodore 1351 Mouse for C64/128

Autopsy:

The Mouse 1351 is a mouse made by Commodore from 1986, which can directly be plugged into the 9-pin controlport of a C64/128/D/DCR. The “Mouse 1351″ was provided with a manual and a test/demo disk.

Commodore Mod. 6499 Sip Videotel modem

October 6th, 2010 2 comments
Commodore Adattatore Telematico Mod. 6499

Autopsy:

The Commodore 6499 is a modem made by Celint for Commodore in Italy. It was able to connect the Commodore 64 with Sip Videotel. Sip Videotel (now Telecom Italia) was unique telephone company in Italy that provided a sort of BBS with teletext.

The modem could transmit at 300/300 baud on BBSs, and 1200/75 baud on Videotel/Minitel.

Free Spirit’s “1541/71 Alignment System”

October 5th, 2010 3 comments

Free Spirit’s “1541/71 Alignment System” reports the alignment condition of the disk drive as you perform adjustments.

On screen help is available while the program is running. Includes features for speed adjustment and stop adjustment. Complete instruction manual on aligning both the 1541 and 1571 drives. Even includes instructions on how to load alignment program when nothing else will load! Works on the C64, C64C, SX64, C128, C128D in either 64 or 128 mode, 1541, 1571 in either 1541 or 1571 mode! Autoboots to all modes. Second drive fully supported.

Amiga 2000 PAL REV4.5 Kick v2.05 & 4MB of FastRAM Upgrade

October 5th, 2010 No comments

I continue to upgrade my Amiga 2000 PAL REV 4.5. I have upgraded the Kick Rom and added my Vector A2000i zorro Card with 4MB of fast memory.

Amiga 2000 PAL REV4.5 Battery & 1MB ChipRAM Upgrade

September 30th, 2010 No comments

I have decided to upgrade my Amiga 2000 PAL REV 4.5 for get 1MB of chip ram. I also took advantage of this update to install a new battery for the system clock. Amiga 2000 PAL REV 4.5 Fat Agnus 8372A Installation:

  • Install a new Fat Agnus 8372A or 8375 (8375 R1)
  • Look for jumper J101 beside the power connector to the motherboard. Change it to the opposite position. (photo)
  • Look for trace J500 at the back of the machine near the Cia’s (8520′s). It’s a jumper trace that you will have to cut with a razor blade. (photo)
  • Look for trace J102 near the Fat Agnus (8372A). It’s a jumper trace that you will have to cut with a razor blade. (photo)

source: amiga-hardware.com amigahardware.mariomisic.de amiga.org

Unboxing Aoyue 929 Lamp & Aoyue 474A+ Desoldering Station

September 29th, 2010 4 comments
 Aoyue 474A+ Desoldering Station

Autopsy:

My new desoldering station and a magnifying lamp has arrived!

After some frustrating times removing solder on an almost 30 year old PCB i decided to get a desoldering station.

So after using this for a few hours what one word can I use to describe this station? AWESOME! I don’t know how i lived without this in the past. Using desoldering braid or a soldapullt is OK but not consistent.

Package content of Aoyue 474A+:

  • 474 Station.
  • Desoldering Gun.
  • Filter pads 6pcs.
  • Silicone Grease.
  • Filter pipe.
  • Nozzle cleaning pins.
  • Power cord.
  • Desoldering gun holder.

source: aoyue.com

I have purchased a Commodore 64 UK in original Box for 13$

September 18th, 2010 2 comments
Commodore 64 in original Box

Autopsy:

Today i picked up a Commodore 64 with Powersupply in original Box and in good working condition for 13$. The plastics of the Commodore 64 / Powersupply are yellowed but does not affect the right use.

Commodore Amiga 2000 REV 4.5 (Boxed)

September 17th, 2010 1 comment
Commodore Amiga 2000 REV 4.5

Autopsy:

Today i picked up a Commodore Amiga 2000 (Revision 4.5) in good working condition with Keyboard and Mouse.

I have removed the battery and thoroughly cleaned the PCB in that area. I noticed that the PCB is pretty delicate when trying to unsolder. The solder mask becomes damaged when exposed to too much heat for too long, and probably one would easily kill leads unless being extremely careful. Maybe the board’s age adds to it.

from Wikipedia:

The A2000, also known as the Commodore Amiga 2000, was released in 1986. Although aimed at the high-end market it was technically very similar to the A500, so similar in fact that the A2000B revision was outright based on the A500 design.

What the A2000 had over the A500 was a bigger case with room for five Zorro II proprietary expansion slots, two 16-bit and two 8-bit ISA slots, a CPU upgrade slot, a video slot, and a battery-backed clock.

It should also be noted that, like the Amiga 1000 and unlike the Amiga 500, the A2000 came in a desktop case with a separate keyboard. The case was more PC-like than the A1000 – taller to accommodate the expansion cards and lacking the space beneath for the keyboard.

source: wikipedia

Commodore 64 UK – Datassette C16 – Suncom TAC2

September 15th, 2010 No comments
Commodore 64 UK

Autopsy:

Today i picked up a Commodore 64 in good working condition with Powersupply / RF Cable, Commodore 16 Datassette and a Suncom TAC2.

Philips Las Vegas ES2208 (Boxed)

September 9th, 2010 No comments
Philips Las Vegas ES2208

Autopsy:

from old-computers.com Homepage:

This pong from Philips (1977) is a bit special. It uses the unusual AY-3-8550 from General Instruments. This chips offers 4 classic pong games (Tennis, Squash, Squash practice, Football) and 2 shooting games. The paddles can be moved verticaly AND horizontaly, hence the analog joysticks (instead of the classic sliders). The display is in color.

There is a female DIN plug at the bottom-right part of the case. It is used to connect an optional light-gun to play the two shooting games.

There are switches to control the different options like ball speed, paddle size, angle 20°/40°, manual/auto service. There are two buttons: reset and serve. There is even a TV channel selection knob to adjust the picture on the TV.

The Las Vegas ES-2208 is in fact one of the Las Vegas pong systems from Philips. Here is the list:

  • Las Vegas Tele-Spiel ES-2203 (6 games, black & white display, vertical movements)
  • Las Vegas Tele-Spiel ES-2204 (6 games, color display, vertical movements)
  • Las Vegas Tele-Spiel ES-2208 (6 games, color display, vertical & horizontal movements)
  • Las Vegas Tele-Spiel ES-2218 (8 games, color display, vertical & horizontal movements)
  • Travemünde Tele-Spiel ES-2207 (4 games, black & white display, vertical movements)

source: old-computers.com pong-story.com