Archive

Archive for the ‘Retro Computers and other stuff…’ Category

Grillo Parlante ^ Clementoni (Speak & Spell by Texas Instruments)

September 10th, 2009 4 comments
Grillo Parlante (Speak & Spell)

Autopsy:

  • Powersupply 6 volt DC v1.2A with positive tip polarity.

from Wikipedia:

The Speak & Spell line is a series of electronic handheld educational toys created by Texas Instruments that consist of a speech synthesizer, a keyboard, and a receptor slot to receive one of a collection of ROM game library modules (collectively covered under US patent 3934233 ).

The first Speak & Spell was introduced at the summer Consumer Electronics Show in June 1978, making it one of the earliest handheld electronic devices with a visual display to use interchangeable game cartridges.

In 1983, the Speak & Spell was redesigned. The change was even more minute, however, representing nothing more substantial than a redesign of the faceplate graphics.

This version was marketed first in Italian as Grillo Parlante (lit. Speaking Cricket), and then later in the United States and England as the Speak & Spell, and in France as the Dictée Magique again.

source: wikipedia speaknspell.co.uk

Philips Videopac G7000 / Two Joysticks and some Game Cartridges

September 1st, 2009 No comments
Philips Videopac G7000

Autopsy:

Cartridges list:

  • Philips Videopac #1 – Race/Spin-Out/Cryptogram.
  • Philips Videopac #18 – Laser War.
  • Philips Videopac #22 – Space Monster.
  • Philips Videopac #38 – Munchkin.
  • Philips Videopac #43 – Pickaxe Peter.

from Wikipedia:

The Magnavox Odyssey², known in Europe as the Philips Videopac G7000, in Brazil as the Philips Odyssey, in the United States as the Magnavox Odyssey² and the Philips Odyssey², and also by many other names, is a video game console released in 1978.

In the early 1970s, Magnavox was an innovator in the home video game industry. They succeeded in bringing the first home video game system to market, the Odyssey, which was quickly followed by a number of later models, each with a few technological improvements. In 1978, Magnavox, now a subsidiary of North American Philips, released the Odyssey², their new second-generation video game console.

In Europe and Brazil, the Odyssey² did very well on the market. In Europe, the console was most widely known as the Philips Videopac G7000, or just the Videopac, although branded variants were released in some areas of Europe under the names Radiola Jet 25, Schneider 7000, and Siera G7000. Philips, as Magnavox’s European parent company, used their own name rather than Magnavox’s for European marketing A rare model, the Philips Videopac G7200, was only released in Europe; it had a built-in black-and-white monitor.

Videopac game cartridges are mostly compatible with American Odyssey² units, although some games have color differences and a few are completely incompatible. A number of additional games were released in Europe that never came out in the US.

source: wikipedia videopac composite mod videopac flashcart

Sinclair (Amstrad) ZX Spectrum +2A (in the black case) – Issue 2

August 31st, 2009 1 comment
ZX Spectrum +2A Issue 2

Autopsy:

from Wikipedia homepage:

The ZX Spectrum +2A was produced to homogenise Amstrad’s range in 1987. Although the case reads “ZX Spectrum +2″, the +2A/B is easily distinguishable from the original +2 as the case was restored to the standard Spectrum black.

The +2A was derived from Amstrad’s +3 4.1 ROM model, using a new motherboard which vastly reduced the chip count, integrating many of them into a new ASIC. The +2A replaced the +3′s disk drive and associated hardware with a tape drive, as in the original +2. Originally, Amstrad planned to introduce an additional disk interface, but this never appeared. If an external disk drive was added, the “+2A” on the system OS menu would change to a +3.

As with the ZX Spectrum +3, some older 48K, and a few older 128K, games were incompatible with the machine. The ZX Spectrum +2B signified a manufacturing move from Hong Kong to Taiwan later in 1987.

source: wikipedia

Commodore Modem 8010 Powersupply pinouts

August 31st, 2009 1 comment

din5m

  • PIN 1 = Common (GND)
  • PIN 4 = Free
  • PIN 2 = 14.6v (AC)
  • PIN 5 = Free
  • PIN 3 = 14.6v (AC)

Click here for my Commodore Modem 8010.

Some VIC-20 Games cartridges

August 30th, 2009 No comments
Some VIC-20 Games cartridges

Cartridges list:

  • VIC-1111 – 16k Ram Expander. (Manual)
  • VIC-1211A – Super Expander with 3k Ram Expansion. (Manual)
  • VIC-1213 – Machine Language Monitor. (Manual)

click here for the vic-20 cartridges category.

from Wikipedia:

As for commercial software offerings, an estimated 300 titles were available on cartridge, and another 500+ titles were available on tape. By comparison, the Atari 2600—the most popular of the video game consoles at the time—had a library of about 900 titles near the end of its production life (many were variations of another title).

Most cartridge games were ready to play as soon as VIC-20 was turned on, as opposed to games on tape which required a time-consuming loading process. Titles on cartridge included Gorf, Cosmic Cruncher, Sargon II Chess, and many others.

source: wikipedia

Some VIC-20 Games cartridges

August 26th, 2009 No comments
Some VIC-20 Cartridges

Cartridges list:

  • VIC-1905 – Jelly Monsters.
  • VIC-1907 – Jupiter Lander.
  • VIC-1910 – Radar Ratrace.
  • VIC-1912 – Mole Attack.
  • VIC-1920 – Pinball.
  • VIC-1922 – Cosmic Cruncher.

click here for the vic-20 cartridges category.

from Wikipedia:

As for commercial software offerings, an estimated 300 titles were available on cartridge, and another 500+ titles were available on tape. By comparison, the Atari 2600—the most popular of the video game consoles at the time—had a library of about 900 titles near the end of its production life (many were variations of another title).

Most cartridge games were ready to play as soon as VIC-20 was turned on, as opposed to games on tape which required a time-consuming loading process. Titles on cartridge included Gorf, Cosmic Cruncher, Sargon II Chess, and many others.

source: wikipedia

ZX Spectrum +3 (Issue 1) Sound Fix *updated*

August 22nd, 2009 2 comments

Sound fix diagram here. (pdf)

from Cristian Secară Homepage:

The first release (the +3) has a fatal hardware mistake: the 128K sound output is completely distorted.

  • Tech explanation: the analog output of the AY-3-8912 sound chip was intended to be amplified by a one stage common-emitter transistor. In practice, they have forgot to put a resistor to the transistor’s emitter. The result: the transistor works in switch-mode – the sound is converted from analog multi-level amplitude to digitized two-level amplitude, same as the old 48K sound system.

source: secarica.ro ay8912 Demos

Sinclair (Amstrad) ZX Spectrum +2 (in the grey case) – Issue 3

August 22nd, 2009 No comments
Spectrum +2 (in the grey case)

Autopsy:

The original Plus2 (in the grey case) was released in 1987 to get away from the old Spectrums now that Amstrad had taken over. It was very different from previous Spectrums and had a proper typewriter keyboard, built-in casette recorder and 2 joystick ports.

For some unknown reason Amstrad later released a +2A in a black case which is actually a Plus3 with a casette recorder instead of a disk drive.

from Wikipedia:

The ZX Spectrum +2 was Amstrad’s first Spectrum, coming shortly after their purchase of the Spectrum range and “Sinclair” brand in 1986. The machine featured an all-new grey case featuring a spring-loaded keyboard, dual joystick ports, and a built-in cassette recorder dubbed the “Datacorder” (like the Amstrad CPC 464), but was in most respects identical to the ZX Spectrum 128. The main menu screen lacked the Spectrum 128′s “Tape Test” option, and the ROM was altered to account for a new 1986 Amstrad copyright message.

These changes resulted in minor incompatibility problems with software that accessed ROM routines at certain addresses. Production costs had been reduced and the retail price dropped to £139–£149.

The new keyboard did not include the BASIC keyword markings that were found on earlier Spectrums, except for the keywords LOAD, CODE and RUN which were useful for loading software. This was not a major issue however, as the +2 boasted a menu system, almost identical to the ZX Spectrum 128, where one could switch between 48k BASIC programming with the keywords, and 128k BASIC programming in which all words (keywords and otherwise) must be typed out in full (although the keywords are still stored internally as one character each).

Despite these changes, the layout remained identical to that of the 128.

source: wikipedia

Divide 57c in KIT *updated*

August 21st, 2009 2 comments

Divide 57c

Autopsy:

On the last Photo you see two Divide Interfaces. On the left, the PCB Green color, is the Original from DivIde Homepage , On the right, the PCB Red color, is a “clone” from Ebay.

Both working good, but the Divide “clone” has stopped to work after two weeks, chip ram 62256 is broken. Some components of Divide “clone” are differents from the Original Divide interface. like: some values of resistors.

Here it’s the correct picture of solder side on DivIDE 57c. (thanks to Valesoft)

from Divide homepage:

divIDE is an ATA (IDE) interface which takes your ZX Spectrum computing to a whole new level. As the time takes its toll on ageing media such as audio tapes or diskettes, many ZX Spectrum enthusiasts simply stick to emulation for better reliability and comfort.

With divIDE you can put your software collection to a hard disk, CD-ROM or even CompactFlash card and experience your favourite games, demos and utilities the way the were meant to be run – and even better. Using existing firmwares, many users find their Speccy box again a live platform – time for you to make the switch?

Features:

  • divIDE uses full 16 bits of ATA bus.
  • divIDE works on all ZX Spectrum flavours (16, 48, 48+, 128, +2, +2A, +3 and clones)
  • Thanks to divIDE’s onboard logic, theoretical transfer speed is 218 KB/sec (determined by the latency of INI/OUTI instructions).
  • divIDE has 8 KB of shadow flash ROM that hosts operating system core, leaving your original ZX Spectrum ROM intact. Additional 32 KB of RAM accessible as 8 KB memory banks are present.
  • divIDE’s auto-mapping feature transparently maps shadow ROM at important entry points, enabling standard tape emulation, BASIC extensions, NMI menu and DISCiPLE/+D or BetaDisk emulation.
  • divIDE’s MAPRAM feature helps developers and users to test new software without the need of reflashing their working system in shadow ROM. It can also emulate another 8 KB of ROM if necessary.
  • divIDE works with all ATA-compatible devices (there are no known compatibility issues).
  • Available software supports widely used emulator formats (TAP, SNA, Z80, SCR). Just download your all-time favourite games from the web and play!

source: divide homepage divide forum papayalabs.co.uk

Amstrad CPC 464 French + Monitor GT65 + some Accessories

August 15th, 2009 2 comments
Amstrad CPC 464 French Version with GT65 Monitor

Autopsy:

from Wikipedia:

The Amstrad CPC is a series of 8 bit home computers produced by Amstrad during the 1980s and early 1990s. “CPC” stands for ‘Colour Personal Computer’, although it was possible to purchase a CPC with a green screen (GT64/65) as well as with the standard colour screen (CTM640/644).

The Amstrad CPC’s main competitors were the Commodore 64 and the Sinclair ZX Spectrum, though the CPC was bundled with a monitor unlike the Commodore and the Spectrum. The Amstrad CPC 464 sold approximately over 2 million units.

The first machine, the CPC 464, introduced in 1984, was designed as a direct competitor to the Commodore 64 system. Packaged as a “complete system” the CPC 464 came with its own monitor and built-in cassette tape deck. The CPC 664, with its own built-in floppy disk drive, arrived early in 1985, to be replaced itself later that same year by the CPC 6128.

The original CPC range was successful, especially in Europe, with three million units sold. Following this, Amstrad launched the Amstrad PCW word-processor range, which sold eight million units. Variations and clones of the CPC range were also released in Germany and Spain. The Plus range failed to find a market amongst the higher spec 16-bit Atari ST and Commodore Amiga systems.

source: wikipedia

Replace ZX Spectrum 48k Keyboard membrane

August 15th, 2009 1 comment
New Spectrum Membrane

Autopsy:

One of the most common faults on the old “rubber key” spectrums are groups of non working keys. This problem is almost always caused by a worn keyboard membrane.

Commodore Disk Drive 1541C with drive mechanism by Alps Electric

August 9th, 2009 4 comments
Commodore Disk Drive 1541 with drive mechanism made by Alps Electric

Autopsy:

Click here for my collections of Commodore Floppy Drive and here the clones.

from Wikipedia:

The Commodore 1541 (aka CBM 1541, and originally called VIC-1541), made by Commodore International, was the best-known floppy disk drive for the Commodore 64 home computer.

The 1541 was a single-sided 170 kilobyte drive for 5¼” disks. The 1541 followed the previous Commodore 1540 (meant for the VIC-20). The disk drive used Group Code Recording (GCR) and contained a MOS 6502 microprocessor, doubling as a disk controller and on-board disk operating system processor. The number of sectors per track varied from 17 to 21 (an early implementation of Zone Bit Recording).

The drive’s built-in disk operating system was CBM DOS 2.6. There were two versions of the 1541 mechanics. Early models used a drive mechanism made by Alps Electric, distinguishable by its push-down drive door. Later models utilized a drive mechanism manufactured by Newtronics (Mitsumi), which used a lever release.

All but the very earliest 1541s can use either the Alps or Newtronics mechanism. Visually, the first models, of the VIC-1541 denomination, had an off-white color like the VIC-20 and VIC-1540. Then, to match the look of the C64, CBM changed the drive’s color to brown-beige and the name to Commodore 1541.

source: wikipedia

Unboxing DivIDE M’ / R’ Gal Chip (allram Support)

August 8th, 2009 2 comments
Unboxing new Gal's for my Divide

Unboxing:

The divIDE interface with new M’/R’GAL chip support also 16kB allram mode similas as MB02+ interface.

Sinclair ZX Spectrum 48k ISSUE 4B with Video Composite Output.

August 8th, 2009 9 comments
Sinclair ZX Spectrum 48k

Autopsy:

from Wikipedia:

The ZX Spectrum is an 8-bit personal home computer released in the United Kingdom in 1982 by Sinclair Research Ltd. Referred to during development as the ZX81 Colour and ZX82, the machine was launched as the ZX Spectrum by Sinclair to highlight the machine’s colour display, compared with the black-and-white of its predecessor, the Sinclair ZX81.

The Spectrum was released in eight different models, ranging from the entry level model with 16 KB RAM released in 1982 to the ZX Spectrum +3 with 128 KB RAM and built in floppy disk drive in 1987.

The Spectrum was among the first mainstream audience home computers in the UK, similar in significance to the Commodore 64 in the USA. The introduction of the ZX Spectrum led to a boom in companies producing software and hardware for the machine, the effects of which are still seen; some credit it as the machine which launched the UK IT industry. Licensing deals and clones followed, and earned Clive Sinclair a knighthood for “services to British industry”.

The C64 was a major rival to the Spectrum in the UK market during the early 1980s. The BBC Microcomputer and later the Amstrad CPC-range were other major competitors.

source: wikipedia

Texas Instruments TI-99/4A with some Extra Accessories

August 6th, 2009 1 comment
Texas Instruments TI-99/4A

Autopsy:

from Wikipedia:

The Texas Instruments TI-99/4A was an early home computer, released in June 1981, originally at a price of USD $525.

It was an enhanced version of the less-successful—and quite rare—TI-99/4 model, which was released in late 1979 at a price of $1,150. The TI-99/4A added an additional graphics mode, “lowercase” characters comprised of small capitals, and a full travel keyboard. Its predecessor, the TI-99/4, featured a calculator-style chiclet keyboard and lacked any provision for lowercase text.

The TI-99/4A’s CPU, motherboard, and cartridge (“Solid State Software”) slot were built into a single console, along with the keyboard. The power supply board (linear in early systems, switching in later systems) was housed below and in front of the cartridge slot under the sloped area to the right of the keyboard.

source: wikipedia 99er.net

Categories: Gallery, Texas Instruments