Although these diagnostic roms for Intellivision are freely downloadable online i had a bit of trouble finding them so i decided to write this post.
The ZIP archive contains the ROMs and the .CFG file for the correct mapping.
This is a Flash cart (PicoPac-Multicart) for Philips Videopac G-7000, G-7200, G7400, C52, JOPAC and Odyssey 2 by Andrea Ottaviani.
This Flash cart for Videopac / Odyssey 2 is based on Videopac-microSD Multicart project by Wilco2009 (https://github.com/wilco2009/Videopac-micro-SD-Cart)
PicoPAC is a multicart DIY yourself based on cheap “PURPLE” Raspberry Pi Pico clone, easy to build and not expensive and using its 16mb flash for storing games instead of the SDCard.
How much i paid for the PicoPac-Multicart?
More or less for each single Philips Videopac PicoPac-Multicart complete with all the components you will spend €4.69.
The price of each component also includes the cost of shipping and customs clearance.
Below you will find the photos of how i repositioned the BUTTON, i preferred to install in this position rather than on the upper side of the cartridge (default position of the PCB).
You can also download the front cartridge label, UF2 firmware v1.0a and a ZIP archive with 200 games.
For more information about this and other projects by Andrea Ottaviani please visit his github page.
Gallery:
Download:
source: github.com/aotta/PicoPAC
NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
Download: All Games in One Archive (1084)
source: csdb.dk
This is a Flash cart (Pico-Multicart) for SABA Videoplay by Andrea Ottaviani.
This is a forked version of 3DMaze PicoVideocart for using a cheaper and simpler pcb based on pico “Purple” clone and using its 16mb flash for storing games instead of the original SDCard.
How much i paid for the SABA Videoplay Pico-Multicart?
More or less for each single SABA Videoplay Pico-Multicart complete with all the components you will spend €7.69.
The price of each component also includes the cost of shipping and customs clearance.
Below you will find the photos of how i repositioned the LED and the BUTTON, i preferred to install both in this position rather than on the back of the cartridge (default position of the PCB).
Another thing i want to say is to solder the Pi Pico Purple as close as possible to the PCB, i soldered the strips and then removed the plastic holder, this is to avoid you having difficulty closing the cartridge case.
You can also download the cartridge label (front and back), firmware and games in UF2 format, the games must be programmed first and then the firmware.
Gallery:
Download:
source: github.com/aotta/PicoVideocart
.- the inexpensive dual-SID/FM replacement that you can build yourself -.
SIDKick pico by Frenetic is a microcontroller-based C64 SID replacement. Analog inputs for paddles and mice are available just as for the original SID.
Changelog:
Note:
There are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.
Please read the troubleshooting section in case you experience problems.
Review:
My SID Player plays SID tunes with the SIDKick-pico.
SIDKick-Pico by Frenetic.
Download: SIDKick-Pico Firmware v0.21 (193)
source: c64-wiki.com github.com/frntc/SIDKick-pico restore-store.de
It’s been 4 years since i last updated the firmware of these devices, so it was time to do so.
Gallery:
Download:
NEW TAG: C64 BIG GAME PACK
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
Download: All Games in One Archive (1365)
source: csdb.dk
A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.
Changelog:
Download:
SD-1000/PiCOLECO/PiRTO-II are Flash Multicarts for Sega SC3000/SG-1000,CBS ColecoVision,Mattel Intellivision by Andrea Ottaviani based on the cheap version of the Raspberry Pi Pico clone (purple PCB).
I wanted to try and assemble this interesting project and i must say that i was very satisfied. I also contacted Andrea for a small problem of loading the ROMs for the Multicart Intellivision and he was immediately available even though it was Sunday lunch time :-)
I assembled two Multicarts for each console model because as soon as i informed my friend Andry about this project he wanted them too :-D
The Multicarts you see in this article are NOT for sale, for more information about firmware,flashing fw,gerber,3D case model i recommend you visit the github site where these projects are published.
How much did i spend for each multicart?
More or less for each single Flash Multicart complete with all components you will spend around €6.00.
This includes the components that i already had at home and the minimum order from JLCPCB for each PCB which are 5 pieces, as a result i did the division on the JLCPCB invoice total.
Download the ROMs for Sega SC3000/SG-1000, ColecoVision, Intellivision (including CFG mappers) fully renamed and divided into folders in alphabetical order here.
Flash Multicarts Cartridge Case Shell Cover:
A new firmware update for the ARMSiD has been released by Nobomi.
News features and fixes in FW 2.16:
Download: ARMSiD v2.16 [PRG/D64/CONFIG] (323)
source: nobomi.cz github.com/nobomi/Arduino-ARMSID-configurator
.- the inexpensive dual-SID/FM replacement that you can build yourself -.
SIDKick pico by Frenetic is a microcontroller-based C64 SID replacement. Analog inputs for paddles and mice are available just as for the original SID.
Changelog:
Note:
There are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.
Review:
My SID Player plays SID tunes with the SIDKick-pico.
SIDKick-Pico by Frenetic.
Download: SIDKick-Pico Firmware v0.202 (247)
source: c64-wiki.com github.com/frntc/SIDKick-pico restore-store.de
.- the inexpensive dual-SID/FM replacement that you can build yourself -.
SIDKick pico by Frenetic is a microcontroller-based C64 SID replacement. Analog inputs for paddles and mice are available just as for the original SID.
Changelog:
Note:
There are different .uf2-files are firmware files with PWM and/or DAC output, flashing (RGB-)LED on/off AND for hardware revision 0.1 and 0.2.
Review:
My SID Player plays SID tunes with the SIDKick-pico.
SIDKick-Pico by Frenetic.
Download: SIDKick-Pico Firmware v0.201 (224)
source: c64-wiki.com github.com/frntc/SIDKick-pico restore-store.de
A new version of the firmware for the Ultimate U2+L by Gideon is released.
Changes in 3.11a:
Due to “life” (e.g. house renovation) there has not been any time for testing this firmware for other hardware platforms. Will come soon.
Download: Ultimate U2+L v3.11a Firmware (286)
source: ultimate64.com github.com facebook
Recent Comments