Cleaning Commodore Amiga 2000 Power Supply
Photo of cleaning (before and after):
To clean the power supply i have used compressed air and a media bristle brush.
Photo of cleaning (before and after):
To clean the power supply i have used compressed air and a media bristle brush.
Click to view original size
I have repaired the Commodore Amiga 2000 with a Black Screen for a dear friend.
Defect:
Diagnosis:
Repair:
I have repaired the Sharp Twin Famicom AN-500R for a dear friend.
Sharp Twin Famicom AN-500R Repair.
Defects:
Fix:
The microphone is mixed into the output signal, if the contacts of the volume slider are dirty you hear a background noise which disturbs the in game audio.
Gallery:
This is the official demo party results from Gubbdata 2015 (Top 3 Entries only). See also the CSDB GUBBDATA 2015 section for more informations.
C64 Demo:
C64 Music:
C64 Graphics:
Download: Gubbdata 2015 Party stuff (1454)
source: gubbdata.se
CBM prg Studio Version 3.2.2 is released. There are a lot of new features in this version. I’d really appreciate it if you report any bugs you find or have any suggestions/comments.
CBM prg Studio allows you to type a BASIC or Machine Code program in using a nice Windows environment and convert it to a ‘.prg’ file which you can run on an emulator, or even a real C64 / VIC20 or PET if you’re feeling brave and have the right kit.
CBM prg Studio is the result of merging C64PrgGen and VIC20PrgGen. Adding new features and fixing bugs in two apps which were 95% similar was a bit of a nightmare so merging them made sense.
It was also a good opportunity for a face lift and to add some new features, such as:
What CBM prg Studio isn’t is a front-end for tok64, cbmcnvrt, bastext or any other tokeniser / detokeniser / assembler. It’s all been written completely from scratch.
Improvements:
Bug Fixed:
Download: CBM prg Studio v3.2.2 (1426)
source: ajordison.co.uk
Repair Apple II EuroPlus.
This computer has taken a lot of moisture and temperature changes, it can be seen because the connectors (Apple BUS) have dried up and the plastic tends to break. In addition, some pins of the ICs are rusty, fortunately few.
The main problem of this computer, as well the removal of the usual filter capacitor inside the power supply, was that don’t accepts some basic commands (see photo)
The problem was caused by the malfunction of the PROM 341-0014. (E8)
The owner will have to decide whether to purchase the original PROM (current price €13,90 + Shipping) or use a horrible adapter to insert an EPROM 27C16 (2716) in place of a PROM.
This adapter in addition to changing the aesthetics of the original motherboard brings with it some problems.
Gallery of the repair:
source: willegal.net classic-computers.org.nz
This Floppy Drive, but probably also other models, suffer of a quite annoying problem.
The little box in aluminum placed over the head of the Floppy Drive comes off, this happens because the bioadhesive foam rubber that was used to fix the “box” on the head will dry.
This piece of aluminum that at first thing can seem absolutely useless, however it is not, because it is a balancer, without this little piece of aluminum the floppy drive head vibrates and consequently don’t read / write properly.
The replacement of the bioadhesive foam rubber is very simple.
This is the official demo party results from Forever 2015 (Top 3 Entries only). See also the CSDB FOREVER 2015 section for more informations.
C64 Demo:
C64 Music:
C64 Graphics:
C64 1K Intro:
Download: Forever 2015 Party stuff (1452)
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
Download: All Games in One Archive (4486)
source: csdb.dk
This is the official demo party results from BCC Party #9 (Top 3 Entries only). See also the CSDB BCC Party #9 section for more informations.
C64 Demo:
C64 Music:
C64 Graphics:
Mixed:
Download: BCC Party #9 Party stuff (1449)
source: csdb.dk
I finally found a time to do the replacement of all the electrolytic capacitors of my Amiga 1200 that was beginning to have serious problems of stability.
Since I had disassembled the amiga i took the opportunity to do the E127R fix that solves some problems of graphics glitches with the interface Indivision AGA 1200.
The fix is very simple to do, you need to short the E127R resistor with a jumper.
I have also replaced the original power supply of the Amiga with a ATX power supply can supply more ampere and is a little stable than the original.
Commodore Amiga 1200 Recapped:
Commodore Amiga ATX Power Supply:
E127R Amiga 1200 Indivision Fix:
It was released a new OS Update for the Everdrive N64 Flash Cartridge (Nintendo 64) by Krikzz. The upgrade instructions can be found here.
Changelog:
Download: Everdrive N64 - OS Update v2.09 (1345)
source: krikzz.com
This Commodore 64 was found in the trash from a friend, although aesthetically in a good state, the computer doesn’t work.
Defect:
Components replaced:
Sorry, this entry is only available in Italian.
Scene World is a C64 magazine on disk dedicated to various activities of both C64 scenes.
“Both” means, that we are supplying information and texts of both scenes; NTSC and PAL.
Download: Scene World #24 (1337)
source: sceneworld.org
Recent Comments