Atari 7800 ProSystem (NTSC) Repair
Atari 7800 ProSystem (NTSC) Repair.
Defect:
- The console doesn’t power on.
Replaced parts:
- Replaced 1 x Push Button. Recovered from a PCB of an Atari 7800 that lying inside the box of the spare parts.
Atari 7800 ProSystem (NTSC) Repair.
Defect:
Replaced parts:
Yamaha AX-200M MSX (Arabic) ROM Dump (click to enlarge)
Download: Yamaha AX-200M MSX (Arabic) ROM-IC321-27256 (1350)
Perfect – Daewoo MSX 2 (Arabic) Rom Dump (click to enlarge)
Spectravideo SVI-728 MSX (Arabic) Rom Dump (click to enlarge)
Defect:
Diagnosis:
Replaced parts:
Commodore Dual Drive Floppy Disk Model 4040 Repair
Defect:
Replaced parts:
Note:
The cause of many problems was the previous repair. It was replaced the voltage regulator LM340K (7812) with a LM338K (Adjustable Regulators). The two components are not compatible and have a different pinout.
Download:
CBM prg Studio Version 3.2.0 is released. There are a lot of new features in this version. I’d really appreciate it if you report any bugs you find or have any suggestions/comments.
CBM prg Studio allows you to type a BASIC or Machine Code program in using a nice Windows environment and convert it to a ‘.prg’ file which you can run on an emulator, or even a real C64 / VIC20 or PET if you’re feeling brave and have the right kit.
CBM prg Studio is the result of merging C64PrgGen and VIC20PrgGen. Adding new features and fixing bugs in two apps which were 95% similar was a bit of a nightmare so merging them made sense.
It was also a good opportunity for a face lift and to add some new features, such as:
What CBM prg Studio isn’t is a front-end for tok64, cbmcnvrt, bastext or any other tokeniser / detokeniser / assembler. It’s all been written completely from scratch.
New features:
Bug Fixed:
Download: CBM prg Studio v3.2.0 (1089)
source: ajordison.co.uk
I must thank my friends which have contributed to the growth of my Repair Laboratory with donations of spare parts.
For this donation i thank: Andrea Pierdomenico, Paolo M.R, Paolo Cognetti.
The items listed below are in poor condition and they are not working.
Donated items:
This is the official demo party results from X-2014 (Top 3 Entries only). See also the CSDB X2014 section for more informations and downloads.
C64 Demo Competition:
C64 Graphics Competition:
C64 Music Competition:
Download:
Video:
source: csdb.dk
Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.
Full Changelog:
A minor update, mainly in the name of stability. This hopefully eliminates glitches unrelated to the in-game buttons on some consoles, e.g. Seiken Densetsu 3 rebooting intermittently or graphical glitches in DKC 2+3, that had been introduced with v0.1.7 preview 1.
Download: SD2Snes Firmware v0.1.7 Beta/Preview Rev 3 (1418)
source: sd2snes.de
I must thank Davide M. for the donation.
Gallery:
The Commodore 4040 is the replacement for the previous models 2040 (USA) and 3040 (Europe). It’s a dual drive 5¼” floppy disk subsystem for Commodore International computers. It uses a wide case form, and uses the IEEE-488 interface common to Commodore PET/CBM computers.
These drive models use a similar single density, single side floppy data storage format to that used by the Commodore 1541 drive, but with a slightly different data marker indicating which model originally formatted the disk. The low-level disk format was similar enough to allow reading between models, but different enough that one series of drive models could not reliably write to disks formatted with one of the other model series.
Download: CBM 2040-3040-4040-8050 Disk Drive Manual (2212)
Testing the Floppy Drive with the ZoomFloppy interface:
source: wikipedia
I have adapted a power supply Cisco (P/N 34-0874-01) to be used with the Home Computer Amstrad CPC 6128/664 that use two voltages +5v and +12v (pinout). If you want to use this computer without the original monitor the only way is use a external power supply.
The photo speak for themselves, the modification is very simple. The only thing that i want to say, maybe not everyone knows it, the Cisco power supplies uses the STANDBY remotely, you need to connect together the ROF line with the one of two RTN (GND).
I have also added a third cable in case you want to use an external Floppy Drive.
Gallery:
Some new games or tools (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups.
Titles:
Download: All Games in One Archive (2974)
The 12th X party will be held from October 24th until October 26rd 2014. The party will be at the location: De Hoof 18, Someren – the Netherlands. Competitions: C64 Demo, C64 Music and C64 Graphics.
source: x-2014 homepage
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
Release notes for the HxCFloppyEmulator software v2.0.26.0:
Download:
source: hxc2001.free.fr lotharek.pl
Recent Comments