Commodore Amiga 2000 – Black Screen of death

The Battery Acid has corroded some pcb tracks (not visible to the naked eye) connected to the pin of the resistor packs RP900 and to MC68000 and probably other IC.

Gallery before cleaning and repair:

Commodore Amiga 2000 – All that glitters is not gold.

After some work it seems to work but still suffers of some problems.

Present problems:

• All Connectors are rusty and uprooted.
• Boot sequence problems, when boot correctly, there are no problems.

Resolved issues:

• Corroded tracks, i have made 12 bridges*.
• Replaced “deflowered” kickstart socket.
• Replaced not working Kickstart 1.2 ROM.
• Replaced 4 x LM33256 (RAM) shorted.

I need to assess whether or not continuing with the repair…

Big gallery of the repairing:

1234►

Welcome back, Commodore Amiga 2000.

I do it very shortly, i don’t like writing a lot because i don’t  have time to do and i don’t like it.

We are left with the Amiga 2000 that sometime works and sometime not.

Defect/Boot Errorr code was: gray / yellow / green / rainbow / out of sync / purple / white.

When this not happen, the boot works perfectly and i can see theusual “hand”

• To fix the problem of the green screen that indicates problems of the RAM, i had to replace 3 x LM33256 (Total RAM replaced: 7), these ram are not shorted but partially functional and 1 x 74LS244.
• To fix the problem of the yellow screen which created problems with the LATCH, i had to replace a 1 x 74LS373.

I have also replaced the socket of the MC68000 CPU and i have discovered another interruption between the pitche and track and also a lot of corrosion and recovered some connectors of an old Amiga 2000 REV 4 motherboard to give an decent aesthetic look to the repaired motherboard.

Now the Commodore Amiga 2000 works perfectly.

Before and after Gallery:

Defect:

• Black screen.

Replaced parts:

• Soldered a 24-pin IC socket.
• Replaced 1 x 901486-07 KERNEL ROM (UE12)

Gallery of the repairing:

A big disappointing this Commodore SX-64 USA purchased for spare parts to fix aesthetically one of my SX-64 PAL.

Why disappointing? because from the photo’s looked in a very bad shape, rust stains, various diseases and not working.

Conversely after removed the shit from the external case, replaced the booring PLA (906114), general cleaning + keyboard / Floppy Drive test and replaced one keyboard lock, the SX-64 is fully working and aesthetically in good condition.

Now i have for myself four SX-64 where the fourth is NTSC/USA, but honestly i was not looking for the USA version.

I am really unlucky :D

Gallery of the cleaning and repairing:

12►

Commodore A3640 CPU Card 3.2 Upgrade.

I have updated only the GAL (U209) because the GAL (U204) was already replaced.

Gallery of the work:

Commodore Amiga 4000 Replacing Battery Clock with a CR2032.

Gallery of the work:

Download: AmigaWiki GAL/PAL/PLD (1767)

The Amiga 4000 motherboard can be ´hacked´ to handle 64Mb of Fast Memory, to do this, you have to solder a new GAL and make some bridges between FASTRAM SIMM -> GAL -> CHIP RAMSEY.

This work is not complicated but you need to have a good practice with the soldering iron and PLCC soldering.

Gallery of the hack:

Download: Amiga 4000 64Mb Hack (1577)

source: Cosmos Blog John Hertell Blog

Commodore Amiga 4000 updating GAL 16V8 for IDE PIO-2.

After doing this update of the two GAL’s 16V8 from PIO-0 (commodore original) to PIO-2 mode the access of the IDE drives are 25% more faster.

Gallery of the work:

Source & Download: amigawiki.de

List of works that have been made:

• 1 x Commodore Amiga 4000 – Full Recap.
• 3 x 68040 -> 68(EC)060 Adapters – Testing & Fixing.
• 2 x Commodore A3640 – Full Recap and Polarity Fix.
• 1 x Commodore A3640 – Oscillator Socket.
• 1 x Burning Kick 3.1 patched version for 68040 -> 68060 adapters*

* exec.library has been patched to support a full Motorola 68060 CPU with FPU. This patch is not needed for the EC version without FPU.

Gallery of the work done:

Download: Kickstart v3.1 Exec Patch Version for 3k & 4k - Ready to Burn! (1509)

This post is dedicated to all the people that do not remove the damn battery on any hardware, not only Amiga.

It was better don’t make this repair, i knew from the beginning, when you find an acid lake that takes away everything, pad, pcb tracks and some welding is better left alone, however the Amiga 4000 was working perfectly but without the a way to Save or Load the system Date.

I wanted to challenge for the umpteenth time this problem where anything that i make comes off and worsens the situation already dramatic.

Conscious that the final work was a colossal shit, because with exploded pad, broken track and the through holes between layers fucked up you can not do miracles, you can only hope doing your best.

In fact, it works perfectly, but it remains a shitty job, unwatchable.

Moral: REMOVE ALWAYS THE BATTERIES and if the pcb is corroded by the leaked acid clean very well using appropriate products, not with the usual alcohol or a bath with soap, used products like PCC KONTAKT CLEANER or like, scratching well the pcb and also the holes between layers using a needle fine.

Gallery of the repair:

Defect:

• The joystick on port #2 always goes in one direction (left).

Repair:

• Replaced the two 74HCT166 (SMD) that control the logic of both joystick ports have been eaten by the acid leaked from the battery and a cause of a short circuit both are dead. (please see photos)

Gallery of the repair:

Commodore Amiga 1200 Full Recap.

Commodore Amiga 3000 REV 8.9 (B2) Full Recap.

Restoring the original configuration of a ACT Elek. Apollo 1260

Works that have been made:

• Cleaning the pad and weld residues on the solder side of the 68060 CPU.
• Removing the KIT/Hack to use a SIMM 64MB instead of 32MB. The KIT / Hack not working well.
• Restoration of the power PCB of the CPU and installation of the BD242 transistor (TIP32) in place of a voltage regulator. (Now the PCB is in original state)
• Someone needs to explain me how the fuck do you can use a voltage regulator type LT1085(84) fixed 3.3V instead of a Transistor!
• Overclocking with 80MHz oscillator.

Gallery:

Commodore Amiga CD32 Full Recap.

Gallery of the repair:

Commodore 128 Garbage Screen & Random Memory Problem repair

Defect:

• Garbage Screen in 128 mode and Random Memory problems in 64 mode.

Repair:

• Replaced the MOS 8502 CPU.

Note:

• The problem of the Garbage Screen / Out of Memory / Memory problems of the Commodore 128 is not always a problem of Ram / Multiplexer or Bank Switching.

Gallery of the repair:

This upgrade kit for the standard TI disk controller card allows 80 track drives to be used, such as a 3 1/2″ 80 track floppy.

The modified code supports 40 and 80 tracks for SSSD and 80 tracks for DSSD, whatever drive is designated as the 40 track drive, either #1 or #3, supports 40 track DSDD.

The update is very simple to make, you have to remove the original ROMS and replace with two sockets and insert the two 2532 EPROMS pre-programmed.

Gallery:

Download: FDC Latest ROMS (835)