I received the Texas Instruments Expansion System (PEB) from a dear friend.

The Texas Instruments Expansion System (PEB) although fully functional, needs a restoration, for example; some parts of the top and bottom cover are rusty.

Some photos of the work that i have done:

Commodore Amiga 600 (Black Screen) Repair

Defect:

• Black Screen.

Replaced parts:

• 4 x Electrolytic Capacitor 10uF 35v
• 2 x Electrolytic Capacitor 22uf 35v

Note:

The Amiga 600 Motherboard looks in good conditions; no traces of a acid leakage from capacitors, as usually happens on Amiga 600/1200/4000, but all had a too high ESR (Equivalent Series Resistance).

Atari 7800 ProSystem (NTSC) Repair.

Defect:

• The console doesn’t power on.

Replaced parts:

• Replaced 1 x Push Button. Recovered from a PCB of an Atari 7800 that lying inside the box of the spare parts.

Yamaha AX-200M MSX (Arabic) ROM Dump (click to enlarge)

Download: Yamaha AX-200M MSX (Arabic) ROM-IC321-27256 (1361)

Perfect – Daewoo MSX 2 (Arabic) Rom Dump (click to enlarge)

Download: Perfect - Daewoo MSX 2 (Arabic) Rom Dump (1460)

Spectravideo SVI-728 MSX (Arabic) Rom Dump (click to enlarge)

Download: SVI-728 (Arabic) ROM-ic48 OKI M27128 Prom (1560)

Commodore Educator 64 Repair.

Defect:

• The video signal was distorted.
• Smoke coming out from the monitor.

Diagnosis:

• Short circuit in the horizontal video section.

Replaced parts:

• Replaced 1 x Diode MR 854
• Replaced 1 x Electrolytic capacitor 470uF 25v
• Replaced 1 x Resistor 1 Ohm / Tolerance 10%

Working Commodore Educator 64

Commodore Dual Drive Floppy Disk Model 4040 Repair

Defect:

• Completely dead with all LEDs lit up like a christmas tree.

Replaced parts:

• Replaced 1 x LM340K (7812) Voltage Regulator (VR1)
• Replaced 1 x 7406 Hex Inverter Buffers/Drivers (UJ6)
• Replaced 1 x 6522 (VIA) Versatile Interface Adapter (UM3)
• Replaced 1 x 6504 8-Bit CPU (UH3)
• Replaced 1 x 6502 8-Bit CPU (UN1)

Note:

The cause of many problems was the previous repair. It was replaced the voltage regulator LM340K (7812) with a LM338K (Adjustable Regulators). The two components are not compatible and have a different pinout.

Download:

• CBM 2040-3040-4040-8050 Disk Drive Manual + Led Diagnostic (1045)

I have adapted a power supply Cisco (P/N 34-0874-01) to be used with the Home Computer Amstrad CPC 6128/664 that use two voltages +5v and +12v (pinout). If you want to use this computer without the original monitor the only way is use a external power supply.

The photo speak for themselves, the modification is very simple. The only thing that i want to say, maybe not everyone knows it, the Cisco power supplies uses the STANDBY remotely, you need to connect together the ROF line with the one of two RTN (GND).

I have also added a third cable in case you want to use an external Floppy Drive.

Gallery:

Tandy Radio Shack TRS-80 Data Terminal (DT-1) Repair.

Defects:

• Some keys are dead (X – Z – DEL – ])
• Sometimes the characters typed are uppercase and sometimes lowercase.
• The DT1 Terminal doesn’t turn on the first try.
• Horizontal scan problem. The right side of the image is rolled up on itself.
• Outside ground of the CRT disconnected.

The jobs that have been made:

• Replaced 1 x 74LS138 Demultiplexer (U1)
• Replaced 1 x 74LS240 Octal Buffer/Line Driver (U23)
• Replaced almost all capacitors on the power supply side with the wrong ESR/Capacitance.
• Cleaning keyboard switches. Fortunately these switches can be opened.
• Removed the filter capacitor (RIFA)
• CRT Linearity adjustment.
• Restored the outside ground of the CRT.

Radio Shack TRS-80 Model 1 (#2) Repair.

Defect:

• Black Screen.

Replaced parts:

• Replaced 1 x CD4069 HEX Inverter (Z6)
• Replaced 1 x CD4069 HEX Inverter (Z57)
• Replaced 1 x 74LS00 QUAD 2-INPUT NAND GATE (Z5)

Radio Shack TRS-80 Model 1 Repair.

This is the second time that this computer was repaired within 2 years.

Defect:

• Video Sync issues (Horizontal Driver) and then … garbage on the screen.

Replaced parts:

• Replaced 1 x CD4069 HEX Inverter (Z6)
• Replaced 1 x MM2102 RAM (Z62)

Repair Commodore Amiga 3000 Motherboard with Battery leakage

There was once a motherboard of an Amiga 3000/25 devastated of the Battery acid where missings all the socketed components and others are unsoldered and recovered for other things.

The situation was not exactly the best one, in other words … was going into the box of spare parts.

I made the impossible, i have cleaned, scraped and rebuilt many tracks of the pcb corroded by the battery acid and i must say that with lot of patience i have repaired the motherboard giving a new life to this Amiga 3000/25 that he had no many chance to come back to work

Apple IIe Power Supply Repair.

Defect:

• Dead with clicking noise in background (This power supply works even without load)

Replaced parts:

• Replaced 1 x 200uF 10V Electrolytic Capacitor.

Removed as a precaution the RIFA filter capacitor.

Gallery:

Epson PX-4+ Easy Repair

Defect:

• Dead.

Replaced parts:

• Replaced 1 x Fuse 3A

Removed the internal Backup Battery (RB 301) 4.8v 90mA.