This computer has kept for many years my BBS “Hidden Power / Nightfall HQ” up until closing, previously the BBS ran on the Amiga 1000 … then A500 and A2000.

I also publish two historical photos of my “BBS Room” where you can see this Amiga 3000 running.

I give a brief description of what was done and what i did today for this computer.

• Year 2001 i have removed the battery and one of the two SCSI Harddisks that was dead.
• Year 2010 i have cleaned the external/internal case and published the photos on the blog.
• Year 2018 i have cleaned the keyboard.
• Year 2019 i have carefully cleaned the motherboard that was covered with a sticky layer of Nicotine (in the BBS Room peoples likes to smoke a lot)
  • Cleaned the Floppy Drive covered inside and outside by a sticky layer of Nicotine, to repair it i had to completely disassemble it.
  • Replaced the Kickstart ROM 2.04 with version 3.1
  • Removed the last died SCSI Harddisk.
  • Installed “new” 250Mb Quantum Maverick SCSI Harddisk.
  • Installed WB 3.1 and MagicWB + a couple of Demos and of course Pinball Dreams Harddisk version.
  • Replaced the WD33C93A SCSI controller chip with AM33C93A-16PC.
  • Cleaned the Keyboard pcb and replacements of the rubber pad, more than 20 keys are died.
  • Removed the Zorro BSC / Alfa Data MultiFace Card 3 (multi Serial) card and installed the Village Tronic Ariadne II (Ethernet Card)

Everything works perfectly as you can see from the photos.

Gallery:

I received as a gift… we start badly,i have recover, we are not there, i purchased, much better, yet another computer from Radio Shack that was missing in my collection.

The computer equipped with several manuals and Floppy Disk was given to me by a dude (thanks Scott) from the United States, he had written “near mint” and is this phrase that attracted me.

The Computer is a Radio Shack TRS-80 Model 4 (GATE ARRAY) therefore of last production with cathode ray tube with green phosphors.

The seller was not joking saying that it was “near mint” and working, the computer is kept very well it almost seems like it has never been used, it can be observed from the cathode tube, from the pcb of the monitor and from the flyback transformer, keyboard, External and internal Case and from the power supply, the usual ASTEC, which has never warmed up, perfect.

The warranty sticker was also intact.

Since there was nothing to clean/repair i have made some hardware enhancements and little replacements.

What i have done:

• Replacement of the 3 filter capacitors (RIFA) which i usually remove and i don’t replace.
• Converted the ASTEC power supply from 115V to 230v because this version of the power supply allows it because has a 115v/230v switching.
• Replaces the 115v power plug with a schuko.
• Various labels to identify the computer has been converted to 220v.
• Installed 64k RAM to update the Model 4 to 128k (blue wire mod as well)
• Dual ROM to BOOT from FreHD or from Floppy Drive. I have used the Jim Brain ROM-el 2364 which uses a Flash ROM (AT49F001AN) but with a standard Mask ROM 2364 pinout.
• Installed a switch for Dual ROM hidden in the ventilation slots without drilling the case.

All test are made with the FreHD interface by Ian Mavric.

Gallery:

123►

Download: TRS-80 M4 GA Dual Boot ROM (673)

This repair was done only for a personal challenge, the computer is still unstable and with several died components.

After a careful cleaning the computer presents these problems:

• TED MOS 8360R2 not working (keyboard doesn’t work) even if i replace the TED doesn’t work, TED also tested on a working C16 doesn’t work.
• PIO MOS 6529 need to be replaced. The keyboard doesn’t work.
• CPU MOS 8501 Dead.
• Joystick ports (see photo)
• Cartridge connector need to be replaced.
• Modulator without lids (Above and Below)
• The sockets of TED and CPU should be replaced.
• Other rusty pieces.

Gallery of the repair:

Commodore 64 repaired ASSY 250425 (1 of 3)

Defect:

• No Video Signal.

Repair:

• Replaced 1 x MOS 8701 R1 (U31)

Commodore 64 repaired ASSY 250425 (2 of 3)

Defect:

• Out of Memory.

Repair:

• Replaced 1 x RAM MT 4264-15 (U21)

Commodore 64 repaired ASSY 250407 (3 of 3)

Defect:

• Garbage Screen.

Repair:

• Replaced 1 x RAM MB 8264A-12 (U22)

The usual modification of a Gotek in HxC this time also with OSD (On Screen Display) support for Amiga 1200.

Gallery:

Video:

source: hxc2001.com

I have received from a friend two Sinclair ZX-81 to repair and taking advantage of the “sinclair” moment :-D i have also repaired one of my ZX-81 that is died staying off for years :-(

Two out of three ZX-81 have the ULA dead, while the third had a dead membrane and some short circuits caused by someone who don’t know how to unsolder/solder properly.

I have recovered the ULA from this last one and repaired the better one of the two ZX-81, i have also installed the Video Composite mod using the ZX8-CCB kit.

I have also repaired my ZX-81 always with the ULA dead and installed the Video Composite mod using the ZX8-CCB kit.

I thank Marco Lucarelli for giving me the Video Composite mod and giving me one of the two ZX-81 (without ULA / dead Membrane and short circuits) for spare parts.

Gallery of the repair:

I have replaced all the electrolytic capacitors of this Amiga 600 motherboard.

Gallery of the repair:

I have replaced the CPU socket of the Amiga 2000 CPU because the computer have a strange boot problems, for example: black screen.

After the replacement the problem has been gone.

Gallery of the repair:

Texas Instruments TI-99/4a Repair.

Defects:

• Black Screen and deafening sound in background.
• Garbage Boot Screen.

Replaced parts:

• 1 x SIGNETICS C2E011 ROM (U610)
• 1 x TMS4116-15 RAM (U106)

Gallery of the repair:

Texas Instruments TI-99/4a Argentine (Spanish) Version Repair.

Defect:

• Black Screen and deafening sound in background.

Replaced parts:

• 1 x TMS 9900NL CPU (U600)
• 1 x Burned Resistor (15 Ohm)

Note: This motherboard has already been repaired by someone at least once.

Gallery of the repair:

This is a very old article from 2016 that i never published on my blog.

Summarizes the purchase, shipping, cleaning and simple repair of a Commodore 4064 with a very low serial number.

Since i had not talked about the repair, i begin to tell that only the VIC-II 6569 Video Chip in Ceramic format was broken.

In the photos there is also a comparison between the Commodore 4064 (PAL) and the Commodore Educator 64 (NTSC)

Below the old article.

The title of this post is: I want it at all costs.

But what? a computer! which model? an old one that I missed to complete a part of my collection.

This computer is really unusable, as are all of them, but this one beats them all.

It’s a Commodore 64 in a PET case produced in 1982, with a green phosphor monitor, stripped of the sound chip (SID 6581) and colour RAM (2114), with a modified kernel that doesn’t use any colour, and a keyboard with different 1..8 keycaps (no colour code on the front).

What’s left? An useless computer with no sound and no green-scale colours; it just uses black and green, while the Commodore Educator 64 has sound and can show colours in shades of green.

After getting the Educator 64 I wanted to complete the pair with a Commodore 4064, and I started to look for it.

I saw a few 4064s that sold for bizarre prices – I can’t say that they were high, because if you want something you are willing to buy it whatever the price, but anyway…

Here begins my adventure :-D

At one time a 4064 pops up in a well known auction site – take note that I don’t use artificial intelligence search engines to look for items, I don’t give a shit… if I find something when I look for it, that’s fine, otherwise it’s not a big deal.

That one was located in Germany, the price was low (at least for me – someone considered it very high), but was the seller willing ship? No he wasn’t.

I wrote to him, no reply, I sent the same message translated in German (thanks google), he responded in German telling me that the item was too big and he didn’t know how to deal with it.

I wrote him again in google German, telling him that I could send him some shipping and packaging instructions – I have them ready in many languages. His reply: I don’t ship.

I was sad and discouraged, because even if the unit wasn’t working, it was in an excellent aesthetic condition and with no missing parts.

I asked for help to my friend Andrea, who asked Ciro, who told me that I could ask his German contact Ralf Schmitz if he could lend me a hand.

Meanwhile the auction was getting near the end… still at a low price.

I wrote to Ralf – a very kind person – and he explained to me that he lives 530Km far from the place where the computer was located. Things got complicated.

I asked Ralf to contact the seller, who maybe preferred to talk with a compatriot :-D

The seller didn’t reply, the auction was ending, what should I have done? I love to risk, and while in chat with Ralf I told him the maximum amount to bid.

I won the item at the right price, in the right moment.

Then what? The seller didn’t have many feedbacks but Ralf suggested to pay right away with Paypal which offers buyer’s protection without the risk of losing the money.

I sent the money to Ralf with Paypal, and he paid the seller.

Ralf wrote him. No reply. The Easter weekend went by, still no reply.

And then one day… the guy replied! Ralf could contact him by phone and they chatted for more than one hour. The man seemed good; old but fair.

The seller told Ralf that he didn’t want to ship because he didn’t know how to properly package, he didn’t have packaging material and he didn’t want to look for it… then he told that he should have to buy some tape, and petrol for the post office, and so on…

I talked with Ralf, and one of the ideas we ditched was to ask someone to go to the seller’s place to help him to pack the 4064 and have it sent to Ralf with some kind of hitch-hiking.

I was suffering.

New solution: simplify the shipping.

I explained Ralf how to separate the monitor from the base: it’s a matter of unscrewing 5 screws, detaching a connector from the motherboard, and cutting two wires (I didn’t even think about explaining how to unsolder them).

The seller was was fine with the idea.

Ralf had to send a huge package containing the packaging material – boxes, foam and bubblewrap – and written instructions from me and Ralf.

The seller shipped the packages with DHL, which in Italy delivers using SDA (one of the cheapest and lower quality couriers). Panic.

The seller is old so he shipped one box at a time: the monitor first, that arrived in 5 days, then the base, that took much longer and made my anxiety skyrocket – Ralf told me that DHL had a few problems in Germany but the package should have crossed the border.

While he was writing to me, the second package arrived at destination.

The computer is now complete and in excellent condition, and with a slightly low serial number :-D

My thanks to Ralf Schmitz because without him this wouldn’t have been possible, and to Andrea for putting up with my anxiety during the last 20 days.

And my thanks to Giacomo Vernoni for translating this report, otherwise I would have written just a paragraph of text – and that would have been a pity :-D

Gallery:

123►

First of all, a premise: All the repairs i do are for hobby purpose ONLY. It is NOT a job, and i fix stuff for a selected people group that i consider needs my help. All other people please ask somewhere else to get your items repaired back.

A guy contacted me 3+ months ago (April 2019) asking help to fix his Amiga 4000D (Yellow screen at boot for a couple of seconds, and then black). I agreeded to help him.

This Amiga 4000 was tested with A3640 and a Phase5 Cyberstorm MK3 CPU cards, with which the A4000 does not work with the same issue descripted above.

I immediately noticed a fairly important damage caused by battery and caps acid leakage (especially in the audio area, see photo).

After cleaned everything, i rebuild some interrupted pcb tracks on the motherboard (audio / ram / status led section) and replaced capacitors on both motherboard and 3640 (the fault persisted, of course).

Next, i used the Chucky DIAGROM: the DIAGROM is useful to understand what might be that doesn’t work, and the output via RS232 is also very useful if nothing is displayed on the screen.

DIAGROM reported some issue with all IRQs and CIA Timings, but everything else was working (video output, images, sound, mouse, joystick ..ect..).

The IRQ problem is well known in the Amiga 4000 repair circle, because it could be caused by IRQ _CIPL or _IPL interrupted lines, the pcb tracks start from PAULA and goes to the GAL U701, and from the GAL to the CPU connector.

Well, I checked all the IRQ lines, and they were good. I checked again, everything was ok (the checks must be done from PAULA to the GAL and from the GAL to the CPU connector, amiga pcb solder side and CPU card pcb solder side) at this point i thought that GAL U701 was dead, so i programmed a new GAL and replaced it. Unfortunately nothing changed.

Thinking about what it would cause the GAL not working properly, i pointed the finger to the GAL CLOCK, exactly to the pin 1 of the GAL U701.

The Clock was there but something was not clear to me: the signal i see on the oscilloscope was corrupt, fixed at 5V. At this point i said to myself, what is that supplies clock signal to the GAL? Clock on the pin 1 of GAL U701 is supplied by the IC 74F86 U711, pin 6, via the resistor R702 (obviously resistor was good).

I called my friend Andrea (Andry) and asking him to check on his A4000 the value of that pin (6) of the IC U711 (i could have done that myself on my Amiga 4000, but disassemble it’s a nightmare). My friend does not have an oscilloscope, so i asked him to check the power using a digital or analogue DC tester. On his A4000 the value of U711 pin 6 was was completely different than my value.

Bingo, it is! i run to the local electronics store to buy a SMD 74F86 IC, but obviously they didn’t have it.. so, i purchased it on Ebay, replaced it, and yes, it was dead.

It was not the only faulty component, because replacing the new GAL U701 with the original GAL U701 did not work. So, the original GAL was dead, too.

New IC U711, new GAL U701 and the A4000 is back to life.

Other minor fixes i have been done on this Amiga 4000 are: useless replacement of an 8520 (U300), installation of cooling fan on the CPU 68060 – 50MHZ on Cyberstorm MK3, rebuild of a broken resistor damaged by the caps leak.

No more other to say, except that i am happy i succeeded to repaired this Amiga 4000 for a person that needed my help.

Gallery of the repair:

1234►

Video:

I will never stop repeating; please you must repleace all capacitors of the newbrain before turning it on.

I have replaced all capacitors some with acid leaks and this time everything has worked very well.

I left the computer running for a couple of hours and no other problems have been manifest yet … but it won’t last forever.

Gallery of the repair:

Useful link to visit: 8bit-homecomputermuseum.at

The first thing to do with this home computer before turning it on after many years that it was off is replacing all capacitors, which i did (some capacitors with acid leaks) and the computer worked well for about 15 minutes.

After the first 15 minutes while running a “for next” cycle, the computer started to show signs of slowing down and then freezed.

The problem was a RAM (4116) on BANK 2 [POSITION 416] (see photo), replaced the RAM the computer has started working again for another 15 minutes then it was freezed again.

I turned it off and on again and in this time a single line was repeated for X times, only with the composite video output, the VFD Display worked well (see photo)

Looking at the wiring diagram i found the area that manages the composite video output and i started to making measurements with the oscilloscope and after quite some time i have found the IC 74LS157 [POSITION 449] with a strange measurements that did not convince me for example the output pin 7 (OUTPUT Y2), in fact was broken, replaced the component the computer has started to work again.

Hopefully nothing will happen again: D

Gallery of the repair:

Useful link to visit: 8bit-homecomputermuseum.at

This is the Battery Pack for the Newbrain, very comfortable and very light :-D useful for taking the computer to the beach during the summer holidays.

Obviously the Battery Expansion Unit after many years of inactivity has presented some problems of the 20 x 1.2V 600mA NiCd batteries.

The batteries besides being completely exhausted i had leaked acid. (see photo)

Fortunately, there are no major damages with the leakage of acid and it was enough to clean well, unsolder the 20 batteries and replace them with new ones of 1000mA.

Last update: I noticed a malfunction of the Battery Expansion Unit, when i set the switch to OFF the “discharge” LED remained on.

Looking at the schematic, the switch suspend the charge and the use of batteries, the problem was caused by a pcb pad (see photo) that at first sight seemed to be connected together with another, immediately close, but in truth it was not so, it was enough isolate the connection and now everything works correctly.

Gallery:

12►