2 x Texas Instruments TI-99/4 Power Supply Fixed

• Removed the RIFA Filter Capacitor, one exploded.

 Gallery:

Texas Instruments TI-99/4 Fixed

Defect:

• Garbage screen on startup immediatly or after a couple of minutes.

Fix:

• This defect is very similar to the one of the Coleco Vision console.

The problem are the pins oxidized of the power switch, i have sprayed R-11 and the problem it’s disappeared completely.

I left turned on the computer for more than 2 hours and i have made a 50 x power cycle (ON/OFF) and the problem is no longer appeared.

Note:

I thought there had to be a VDP RAM problem with a diagnosis made remotely without having the TI-99/4 in the laboratory.

To avoid using the lame RF modulator i have used a standard Commodore 64 composite cable that works very well with a NTSC composite video output.

Gallery:

Commodore 64G repaired (1 of 2)

Defect:

• Black screen

Repair:

• Replaced 1 x MOS 7707 (7406) U8

Note:

• The motherboard has been repaired several times, the technician probably in a previous life was a butcher.

Commodore 64 repaired (2 of 2)

Defect:

• Garbage screen but runs programs perfectly.

Repair:

• Replaced 1 x MOS 906114 (PLA) U17

I have sacrificed a Floppy Disk Drive Commodore VIC 1541 to give a new look to a Floppy Disk Drive Commodore 2031 (IEEE-488).

It ‘s not been an easy job, but i’d say the result is very good.

Gallery:

I used a product to regenerate the rubber keypad of remote controls to repair the keyboard flat cable of a Home Computer MSX.

I have used this product many times for my work of Retro Computer restoration but never to regenerate the rubber keypad of remote controls :D

Gallery of the repair: