Kickass IDE for Commodore 64 is a software application which runs under M$ Windows that provides comprehensive facilities to computer programmers for software development.
IDEs are designed to maximize programmer productivity by providing tightly-knit components with similar user interfaces. This should mean that the programmer has to do less mode switching versus using discrete development programs.
Download: C64 Kickass IDE v1.0 (Win32) (1389)
source: noname.c64.org/csdb
This is an AVR MMC/SD boot loader compatible with HolgerBootloader2. Based on a heavily modified version of ChaN’s FatFs library.
SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 or ATmega1284p microcontroller from the Atmel AVR microcontroller family.
The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller’s firmware is available as open source (GPL).
Changelog:
2012-01-22 – release 0.3
- Further size optimizations.
- Enable FAT12 on uIEC3.
Download:
source: sd2iec.de gitweb forum thread c64-wiki
Some new cracked and trained games from your favorites group Laxity.
Download:
source: csdb.dk
New game releases – Take a peek at the newest games available for the Commodore 64.
Download:
source: csdb.dk
EasyProg is a program for the C64/C128. It is used to write (“burn”) cartridge image files (*.crt) and also Kernal (EasyFlash 3) onto an EasyFlash cartridge.
Version 1.6.3 – 07.01.2012
- New Feature: Erase KERNAL/AR/SS5
- Torture Test fixed.
- When a slot is erased, the slot name is erased too (same for KERNALs)
- Slot number is a part of the address if there is more then one slot, e.g. 01:23:0:1200 for slot 1, bank $23, ROML, offset $1200.
Version 1.6.2 – 22.12.2011
- EasySplit files work again.
- Bing! when EasyProg askes for the cartridge name.
Version 1.6.1 – 21.12.2011
- Initialize the cartridge name when a new CRT file is flashed.
Version 1.6.0 – 18.12.2011
- Optimized for speed (EF1 and EF3)
- Support for EF3 features like KERNALs, Action Replay, Retro Replay, Nordic Power and Super Snapshot 5.
- EAPI fixed for EF3, solves problems with save games.
- EF3 directory can be edited.
Download: EasyProg v1.6.3 (1546)
Skoe has also released a new version of the EF3-Menu v1.0.4
Download: EF3-Menu v1.0.4 (1502)
source: easyflash homepage skoe download page
Some new cracked and trained games from your favorites groups: Dinasours, Laxity and Genesis Project.
Download:
source: csdb.dk
CBM prg Studio Version 2.0.0 Beta released. There are a lot of new features in this version, which is why it has been released as a beta. I’d really appreciate it if you report any bugs you find or have any suggestions/comments.
Note that because it is a beta version it can be ran from its own directory, there’s no need to uninstall your current version of CBM prg Studio.
CBM prg Studio allows you to type a BASIC or Machine Codeprogram in using a nice Windows environment and convert it to a ‘.prg’ file which you can run on an emulator, or even a real C64 or VIC20 if you’re feeling brave and have the right kit.
CBM prg Studio is the result of merging C64PrgGen and VIC20PrgGen. Adding new features and fixing bugs in two apps which were 95% similar was a bit of a nightmare so merging them made sense.
It was also a good opportunity for a face lift and to add some new features, such as:
- Programs are project based, meaning all related source files, sprite files etc. are kept in one place and multiple source files can be linked more easily.
- Tabbed MDI.
- Syntax highlighting.
What CBM prg Studio isn’t is a front-end for tok64, cbmcnvrt, bastext or any other tokeniser / detokeniser / assembler. It’s all been written completely from scratch.
NOTE: This is effectively a bug fix for the beta version of 2.0.0 which was released last December, although there are a few new minor features (mostly for the screen designer) and other ‘enhancements’.
Download: CBM prg Studio v2.0.0 Beta Bugfixed (964)
source: ajordison.co.uk
I am very happy to have repaired for my friend four PCB Commodore in one and half hour.
The defects are:
- Motherboard Commodore 64 ASSY 250466 with IEC bus broken. (replaced ic 7406 – U8)
- Motherboard Commodore 64 ASSY 250407 with a Video Output problem with some programs, like FIBR File Manager. (replaced ic 6526 – U2)
- Motherboard Commodore 64 ASSY 250425 with strange character at startup. (replaced ic 4264 – U12)
- Motherboard Commodore Floppy 1541 ASSY 1540050 REV C with IEC bus broken. (replaced ic 7406 – UB1 and ic 7414 – UA1)
A new demo by Samar Productions for Commodore 64. Excellent coders work, i really like it.
Download: I Love the Cube 100% (1192)
source: csdb.dk
We are happy to share some new stuff for Commodore 64.
In these days some new cracked and trained games are released for C64 from your favorites groups.
Download:
source: csdb.dk
Today a friend has donated to me some nice things. Thanks Damiano (Manosoft).
Things that have been donated:
- Sinclair ZX Spectrum +2 Boxed.
- Commodore CD32 Joypad Brand new.
- VIC-20 Expansion Cartridge.
- Commodore C2N old model.
- Joystick Microswitch – The Bug from Cheetah.
Some new cracked and trained games from your favorites groups: ColorClashSoftware, The New Dimension, Genesis Project, TRIAD and Onslaught.
Download:
source: csdb.dk
A new VIC-20 games by Kweepa is Released.
Short Description: A sci-fi text adventure in the vein of Starcross.
Requirements: VIC-20 (24k memory expansion).
Download: Cometfall (1135)
source: sleepingelephant.com
Finally available the C64anabalt Cartridge for Commodore 64.
C64anabalt is an official conversion of Adam Atomic & Danny B.’s award winning single-button 2009 indie game Canabalt for the 8-Bit, 64KB RAM, 1Mhz Commodore 64 home computer developed by Paul Koller (Paulko64). This particular version was designed to run from a 16KB cartridge.
source: rgcd.co.uk
Some new cracked and trained games from your favorites groups Genesis Project and Laxity.
Download:
source: noname.c64.org/csdb
Recent Comments