Stary Piernik 8: C64 – Official demo party results

October 7th, 2013 No comments

This is the official demo party results from Stary Piernik 8 (Top 3 Entries only). See also the CSDB Stary Piernik 8 section for more informations and download.

C64 Demo:

  • Fogyish
  • In Thorn by Sabath
  • Kazachski piesek by Provocator

C64 Music:

  • Nasty Bitch by Wacek
  • One Life by Surgeon
  • Filth And Scottish Words 50% by Randall

C64 Graphics:

  • The Jungle by JSL
  • Black Sun Logo by Miras
  • Gdzie by Maciaszczyk

Download: Stary Piernik 8 full Party stuff (1023)

source: noname.c64.org/csdb/

Some donations of the weekend

October 7th, 2013 No comments
Some donations of the weekend

Thanks go to: Damiano (manosoft) and my Brother Alessandro.

Things that have been donated:

  • 4 x Box of Verbatim Datalife 3.5  2HD Floppy Disk.
  • 1 x Apple Keyboard for my iMac G3 “Bondi Blue” M5521
  • 1 x Iomega Zip Drive SCSI + Cable.
  • 1 x Iomega Zip Drive USB + Cable.
  • 11 x Zip Disk.
  • Some 3.5 Floppy Disk.

Mupi CineVisor recovered from the cellar

October 6th, 2013 No comments
Mupi CineVisor

Autopsy:

The Mupi CineVisor was a must in the 70/80′s year and was used to project movies on the small screen.

The CineVisor was very cheap compared to a classic projector and perfectly manageable by children, don’t require special aptitude like the super8 projectors.

Peak Atlas ESR+ 70 In-Circuit Capacitor Tester

October 5th, 2013 1 comment
Peak Atlas ESR+ 70 (close-up)

Autopsy:

Finally i have replaced my old and inaccurate Capacitor tester with a better one. My lab is beginning to have a semblance semi professional ;-D

Download: Peak Atlas ESR+ 70 User Guide (1357)

Video Review:

Mentor Colour 6 (Pong clone) has been Repaired

October 3rd, 2013 1 comment

Mentor Colour 6 (Pong clone) has been Repaired

Defects:

  • Black screen of death.
  • No sound.

The problem of the power supply has been fixed by replacing the transitor CS 9013 that is used in a very bizarre way to lower the voltage from 9v to 6.85v. The problem of the audio was always caused by a transistor CS 9013 brutally in short circuit. In this case, the transistor is used like a amplifier.

The transistor CS 9013 can be replaced with a BC 337 that it’s equivalent.

Radio Shack TRS-80 Telephone Interface II (Acoustic coupler)

October 3rd, 2013 No comments
Radio Shack TRS-80 Telephone Interface II

Autopsy:

from Ira Goldklang’s TRS-80.com Homepage:

This is the fast way to transfer data from one location to another – by telephone with the Telephone Interface II. It’s a full “originate/answer” acoustic coupler which allows two TRS-80‘s to talk to each other. You can also communicate with another computer which has “originate only” capability (like our Telephone Interface I). You can pass all types of data or prograas between computers, or one of you can operate the other’s computer via the telephone lines. No direct connection to the telephone line is required.

It’s very simple to operate. Just dial the phone number at the location of the TRS-80 you desire to communicate with; after the connection is made, each telephone handset is placed on its interface. Now you’re ready to receive and transmit data. Requires RS-232 Serial Interface Card, Expansion Interface, RS-232 Conununications Package and Level II. Adds versatility to your TRS-80.

Specifications: Baud Rate: Up to 300. Mode: Originate and Answer, full or half duplex. Receive Sensitivity: -45 dBm. Power Requirement: U.L. listed 120-volt AC power module. Size: 2-3/8 x 4-3/4 x 10-1/4″.

source: trs-80.com

New Donation: Sandy Sinclair QL Printer Converter

October 2nd, 2013 No comments

I thank a friend for the donation.

Donated item:

  • Sandy Sinclair QL  Printer Converter.
    • The Sandy Printer Converter was a serial to parallel printer interface made by Sandy (UK).

Amiga 1050 Memory Expansion Cartridge (Boxed/Unwrapped)

October 1st, 2013 No comments
Commodore Amiga 1050 Memory Expansion Cartridge (Boxed/Unwrapped)

Autopsy:

Commodore Amiga 1000 256kb Trapdoor Expansion Cartridge.

HxC Floppy Emulator: firmware (fat) v1.8.2.40 / (slim) v2.1.2.40

October 1st, 2013 No comments

The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.

The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).

There are two differents emulators:

  • A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
  • A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.

Changelog SD HxCFloppyEmulator v1.8.2.40 (fat) & v2.1.2.40 (slim):

  • Index signal behavior corrected while the host system attempt to format a drive without image loaded.

Download:

source: hxc2001.free.fr

Categories: Firmware, News & Rumors, Today

Commodore CHESSmate

September 30th, 2013 2 comments
Commodore CHESSmate

Autopsy:

from Secret Weapons of Commodore homepage:

Introduced CES 1978
Hardware 6504 CPU (28-pin 6502, 8K addressable memory, on-chip clock, IRQ line only) @ 1MHz, 6530 RIOT (64 bytes RAM, 1KB ROM, 2 I/O ports, 8-bit timer), 6332 ROM. Two ROM sockets; the 6332 is occupying only one of them. The 6504 is socketed; the remainder are soldered directly to the board.
Graphics and Sound If you can call it that. Four 7-element LED displays for the timers and four dome indicator LEDs. Piezoelectric beeper.
Eventual Fate Released summer 1978 in USA, UK and West Germany.

This chess machine is an 22 x 16 x 5cm (rear, approximately 8 x 6 x 2 inch; front is 3.5cm/1.2 inches high) machine, off-white (similar to early VIC-20s), with a dark brown base. The 7-element LEDs are in groups of two, one labeled “FROM (Time white)” and the other “TO (Time black)”; the four dome LEDs are labeled “Check”, “CHESSmate LOSES”, “CHESSmate IS PLAYING WHITE” and “CHESSmate IS PLAYING BLACK”.

The “keyboard” is a membrane setup (similar to the Sinclair ZX-80) with 19 keys (A-H, 1-8, NEW GAME, CLEAR, ENTER), but only 11 matrix lines (A-H and 1-8 share lines). A-H are also, respectively, labeled WHITE, BOARD VERIFY, CHESS CLOCK, DISPLAY TIME, STOP CLOCK, SKILL LEVEL, GAME MOVES, and BLACK. The rear plate reads: “Commodore International Limited / Power supply: AC adaptor model C160 / Power rating: AC 10V 600 mA / CHESSmate, 201490 01, made in Hong Kong / CAUTION: DO NOT OPEN MACHINE. UNAUTHORIZED SERVICE VOIDS WARRANTY.” This is printed in English, French and German. On the internal view, the ICs are, from left to right, the 6530 RIOT, the 6332 ROM (next to the empty socket for the option ROM), and the 6504.

The Chessmate was developed by Peter Jennings, the original author of KIM-1 Microchess, under contract to Commodore in 1977. The Chessmate’s hardware is in fact based on the KIM-1, but the ROMs are of course filled with Microchess 1.5, not the KIM’s monitor. This was the same version released for the PET; the empty ROM socket on Martijn’s board was intended primarily for upgrades to the chess program. The keyboard mapping is dissimilar to the KIM as well; some of the ports were actually used for sound, and Commodore made some rearrangements to the unit for ease of manufacture after Peter released the unit to them. While simultaneously released in the USA, UK and West Germany, it was significantly more popular in the latter country than in the others (presumably due to greater interest in chess there). Peter received a royalty for each unit produced, and still owns a first-production Chessmate (sadly non-functional) and the original KIM-1 used to create Microchess and develop the Chessmate’s custom version.

As mentioned, the Chessmate has very different ROMs from the KIM-1, and part of this difference extends to the RIOTs. The 6530 and 6532 RIOT “ROM, I/O and Timer” chips, a series of custom multifunction chips developed by MOS Technology, were designed as integrated-design cost cutters, reducing the chip count on the board as it gave the functionality of several chips and didn’t cost much more to manufacture than a regular ROM. Unfortunately, this has one important consequence: RIOTs are rarely transferable between units, because of differing CS logic between models, differing ROM contents, and some versions use fewer CS lines to get additional I/O lines.

This means that the RIOT you find in your Atari 2600 (yes, VCSes have Commodore-designed chips!) is not swappable with the RIOT you would find in a Chessmate, or in a KIM-1; even the KIM-1 by itself is bad on this point, since it had several revisions alone (my unit is Revision D). Martijn’s Chessmate has a RIOT labeled “6530 024 3279″, meaning produced on the 32nd week of 1979; this is one of the last 6530 RIOT production runs known, unfortunate because the later MOS 6532 RIOT is not pin-compatible with the 6530. The “24″ is also worrisome: this means there are no less than 24 6530 RIOT versions floating around in various units, and to the great despair of anyone wishing to repair a moribund representative of these intriguing units, virtually none of them are compatible with any other.

Download:

Video:

source: floodgap.com/retrobits/ckb/secret/

Repairing & Cleaning a Commodore CBM 610

September 29th, 2013 No comments
Characters rom & CPU 6509A

This gallery shows some stages of the cleaning and repairing the Commodore CBM 610.

Defects found on the Commodore CBM 610:

  • Black Screen of Death.
  • Garbage characters on the screen.
  • Keyboard Yellowed.
  • Filter capacitor exploded.

The black screen of death was fixed by replacing the CPU MOS 6509A and the problem of garbage characters on the screen was fixed by replacing the ROM characters with a EPROM 2532 suitably programmed.

The yellowed keyboard was replaced with a new one in good condition of the Commodore CBM 710. I like Commodore. What will be the difference of a CBM 710 and a CBM 610 keyboard? nothing, are the same! no! on the keyboard of the CBM 710 has two wires reversed! (brown/red) ;-D

The filter capacitor exploded has been removed.

Commodore CBM 610

September 29th, 2013 No comments

Commodore CBM 610

Autopsy:

from Wikipedia:

The Commodore CBM-II series was a short-lived range of 8-bit personal computers from Commodore Business Machines (CBM), released in 1982 and intended as a follow-on to the Commodore PET series.

The CBM-II had two incarnations, the P series (P = personal, or, home use) and the B series (B = business use). The B series was available with a built-in monochrome monitor (hi-profile) with detached keyboard, and also as a single unit with built-in keyboard but no monitor (lo-profile). These machines were known as the “Porsche PETs” for their unique styling.

The P series used the VIC-II 40-column color video chip like the C64. It also included two standard Atari-style joystick ports. The 6509 CPU ran at 1 MHz in the P series due to the use of the VIC-II chip.

The B series used a 6545 CRTC video chip to give an 80-column “green screen” monochrome output more suitable for word processing and other business use than the VIC-II’s 40-column display. Most models have the Motorola 68B45 installed which is a pin compatible variant rather than the MOS 6545A1 2 MHz part. On the B series the 6509 CPU ran at 2 MHz.

Features common to both the P and B series included an MOS Technology 6509 CPU, an enhanced version of the venerable 6502, that was capable of addressing up to 1 megabyte of RAM via bank switching (however, no CBM-II model came with more than 256 kilobytes of RAM, 1/4 megabyte). The sound chip was the 6581 SID, the same one that was used in the popular Commodore 64 (C64) but with some limitations as it was over-clocked to 2 MHz. Additionally, the CBM-II had an industry-standard RS-232 serial interface and an IEEE-488 parallel bus (for use by disk drives and printers) just like the PET/CBM series. The CBM-II’s built-in operating system used an enhanced version of CBM BASIC version 4.0.

An optional Intel 8088-based coprocessor board allowed the CBM-II series to run CP/M-86 1.1 and MS-DOS 1.25; however, the computers were not IBM PC compatible and very little, if any, software taking advantage of this capability ever appeared. The coprocessor board only ran on hi-profile machines due to power supply and mechanical spacing requirements.

The production naming within the United States and Canada was the B128/B256 and CBM128-80/CBM 256-80 while in Europe they were known as the 600 and 700 series respectively (no “B” in front of the model number). The P machine was known worldwide as the 500 series. There are prototype models though such as the B500 (earlier B128 design) and B700 (earlier CBM 128-80/CBM 256-80 design) known to exist.

Due to the popularity of the C64, the P series was cancelled in the United States before it could be officially released; however, a few dealers who received preproduction units sold them. As these computers had not received approval from the Federal Communications Commission, this caused legal problems for Commodore. The units were recalled and destroyed, but a very small number exist today, in private collections. At least one model, the P500, was commercially released in Europe but only sold in small numbers.

source: wikipedia

Memotech MemoPack 16k for Sinclair ZX-81

September 27th, 2013 4 comments
Memotech MemoPack 16k for Sinclair ZX-81

Autopsy:

The Memotech Memopack is a 16K RAM Expansion Pack for Sinclair ZX-81.

This version of the MEMOPAK 16K is fully compatible with either the Sinclair 16K or another MEMOPAK 16K; or a MEMOPAK 32K; or you can work with it just by itself.

TIPS: The default switches for the Master Position are: (Off, On, On, Off).

Download: Memotech Memopack Manual (1603)

Analysis & Repair of two Floppy Drives Commodore SFD-1001

September 27th, 2013 4 comments
Floppy Drives Commodore SFD-1001

This gallery shows some stages of the repairing of the two Floppy Drives Commodore SFD-1001.

Defects found on the two Floppy Drives:

  • Both floppy drives had the capacitors that leaked acid on the motor control pcb.
  • Both floppy drives had the closing arm cracked.

The difficulty was rebuild the tracks of the pcb and remove the most of the leaked acid of the capacitors. Unfortunately on the aesthetic level this type of repair are not perfect, but i’m glad that now work.

To test the correct operation of the Floppy Drives i have used a Commodore CBM (PET) 2001, and a Commodore CBM 610.

Commodore Floppy Drive SFD-1001

September 27th, 2013 No comments
Commodore Floppy Drive SFD-1001

Autopsy:

from C64-Wiki Homepage:

The Commodore disk drive SFD-1001 was build in 1984/85. It has got a storage capacity up to 1 MByte (1.066.496 bytes equals 4166 blocks, ca. 4100 useable) for 5,25″-disks and it has got a IEEE-488 interface.

The data transfer is parallel. Also it is 5-times faster (ca. 1500 bytes/s) than the floppy VIC-1541. It can also used on CBM-PETs and with the right connector (cartridge) on C64/128, too.

The disk drive has build in the Commodore-DOS 2.7 version.

Download: 8250LP (SFD-1001) Disk Drive Technical Manual (1643)

source: c64-wiki.com