Commodore VIC-1020 Expansion Box

February 22nd, 2013 No comments
Commodore VIC-1020 Expansion Box

Autopsy:

from Denial Wiki Homepage:

The VIC-1020 (known as the VC-1020 in Germany) expansion chassis is a large metal enclosure which provides the VIC-20 computer with six additional expansion slots for cartridges (five pointing upward and one lying horizontally and pointing toward an opening on the the back of the VIC-1020). The entire VIC-20 computer is placed into the VIC-1020 and a male edge connector on the 1020′s slot expansion board is mated with the VIC-20′s internal cartridge port. A monitor can be placed on top of the VIC-1020, giving the entire setup a PET computer-like appearance. Indeed, the black “CBM” label across the front of the VIC-1020′s casing is similar to that used on the the PET line of computers. The choice of sheet metal for this enclosure seems natural, as Commodore had a sheet metal fabrication plant for the production of office filing cabinets and desks.

The VIC-1020′s chassis has additional storage space which can be used for the computer’s power supply (a pass-through for the power supply is provided). There is also a metal clip on the underside of the lid which can hold the RF modulator.

Slot expanders such as this allowed the simultaneous use of several cartridges on a single VIC-20. This allowed features of utility cartridges (like the Programmer’s Aid cartridge) and RAM expanders to be combined. Unlike some other slot expanders, however, the VIC-1020 lacked switches to enable or disable individual cartridges – meaning cartridges had to be physically removed to disable them. This emphasizes what seems an apparent design flaw of the VIC-1020; the monitor needs to be lifted off the chassis and set aside to enable the user to open the lid and access the extra cartridge ports – a cumbersome process if repeated often.

source: sleepingelephant.com

Mattel Intellivision Video Composite Amplifier

February 21st, 2013 No comments
Mattel Intellivision Video Composite Amplifier

Autopsy:

You can found Parts list and Schematics here

from wiki.intellivision.us Homepage:

The Intellivision directly generates composite video using the AY-3-8915 Color Processor and a set of resistors. This video gets fed to the ASTEC UM1285-8 video modulator for conversion to RF for display on a television set. It is possible to tap this composite video directly to avoid the distortion and static associated with RF modulation and demodulation. On older units, the RF modulator can decay rather noticeably, leading to very low quality video.

Typical composite video inputs have an input impedance of 75Ω. In contrast, the composite signal generated by the Intellivision has a very high output impedance. (We estimate the output impedance is around 2KΩ.) Tapping this output and feeding it directly into a typical composite monitor does not work. (It will work if your monitor has a “high impedance” input, but such monitors are atypical.) Thus, an amplifier/impedance matching circuit is necessary.

It is also possible to tap the audio the Intellivision generates. The audio output by the Intellivision is nearly directly suitable for feeding line-level inputs on most AV equipment. All that’s required is a coupling capacitor.

The modification should work equally well on all Intellivision variants, including the Intellivision 1, Intellivision 2, the various rebranded units (Sears, Tandy), and the later INTV releases.

source: wiki.intellivision.us

Commodore SX-64 JiffyDos installation and keyboard repair

February 18th, 2013 1 comment

Kernel JiffyDos Installation and Keyboard Repair for my friend Damiano (manosoft.it). To repair the keyboard you must clean the contacts very well on the pcb.

Working Commodore SX-64 in cluster ;-D

February 17th, 2013 No comments

Working Commodore SX-64 in cluster ;-D

New donations: Intellivision + Boxed Games / SX64 Manual / TV +4 …

February 17th, 2013 No comments

Today a friend has donated to me some nice things. Thanks Damiano (Manosoft).

Things that have been donated:

  • Commodore SX64 Manual.
  • TV +4 Pong Clone.
  • PCB Multi Kernel C64/C64C Switch.
  • PCB Universal PLA Adapter.
  • Atmel 27C512 PROM 70ns.
  • Some DIMM Memory (256mb and 512mb)
  • Mattel Intellivision.
  • Mattel Intellivision Boxed Games:
    • Football.
    • Advanced Dungeons & Dragons.
    • Skiing.
    • Maze-A-Tron.
    • Sea Battle.
    • Tennis.
    • Basketball.

Bidding ended to $7,625.00 for the Commodore 65 on Ebay.com

February 14th, 2013 No comments
Categories: Event(s), News & Rumors, Today

Hires Color 7 Demo/Picture Show for Commodore Plus/4

February 14th, 2013 No comments

The Hires Color 7 Demo/Picture Show contains 32 images and utilises the Magica Driver with several Duce and Veto (C64 graphicians) pictures included.

Download: Hires Color 7 Demo/Picture Show (1097)

source: plus4world.powweb.com

C64 Game: Yie Ar Kung-Fu II +6DH [ntsc/pal] / Commando +2 …

February 13th, 2013 No comments

Some new games (Cracked / Trained or Unrealeased) for Commodore 64 have been released from your favorites groups: Sos, Rubberland, Alpha FlightNostalgia and inZane.

Download:

source: csdb.dk

C64 Music Disk: Top 50 of Crack Intro Music Competition 2013

February 13th, 2013 No comments

This music disk of Laxity collects all the songs released during the event Crack Intro Music Competition 2013.

Download: Top 50 of Crack Intro Music Competition 2013 (974)

source: csdb.dk

1541 Ultimate II: New firmware v2.6d

February 13th, 2013 No comments

A new version of the firmware for the interface 1541 Ultimate II is released. This version runs only on the 1541 Ultimate II cartridge (new fpga).

Version 2.6d includes some new features and fixes:

  • FIXED: Ultimax mode forced now correctly implemented (solves issue with freeze and DMA load)
  • FIXED: Updater now works on C128… (not all C128 issues are fixed)
  • ADDED: Programmable cartrige emulation timing.
  • IMPROVED: Some drive emulation enhancements.

Release notes:

  • This version does *not* include SID, but it does include the Ultimate Audio module. Different builds may become available upon request.
  • The internal copier is still in beta. It has been tested with some of my drives, but there might be drives out there that won’t work. Make sure you have an IEC link from the Ultimate to a real drive to use this function. (No need to have a link to the computer.) There is still no retry mechanism; sectors that failed to read correctly will not be re-read.
  • The Kernal replacement function is critical when it comes to timing. Tested on two machines only. Might not work on all C128.

Download: 1541 Ultimate II Firmware v2.6d (1300)

source: 1541ultimate.net

Categories: Firmware, News & Rumors, Today

NAV v9.6: A File Browser with mouse support for the C64

February 13th, 2013 No comments

NAV, is a new file browser for the C64. NAV can use a mouse in Port 1, joystick in Port 2, or the keyboard. NAV can work with up to five drives and has been tested with the following drive types:

1541, 1571, 1581, uIEC, IDE64

Browsing through directories and disks is just point and click! Drives like the uIEC that can store gigabytes of software can be tedious and frustrating to navigate. NAV lets you easily work with D64/D71/D81/DNP/M2I disk images as well as “real” Commodore disks and the IDE64. Up to five drives at a time!

Just click a drive to browse it!Pressing the “@” key brings up a command line that acts just like the good ol’ DOS Wedge. In addition, there are a few additional commands that can be entered on the command line. Just type “@HELP” to get the complete list.

Changelog:

  • More drive icons. The font has been improved, directory listings look better.
  • NAV now displays the number of files on the disk.
  • Lots of bug fixes.
  • LOAD and RUN the CHANGES program to read the complete changelog. As before, type “@help” in NAV to get a full list of features.
  • You can now choose from 12 different backgrounds. I copied most of these tiles from ones used in GEOS (thanks ShadowM).
  • Unfortunately, NAV still does not work with the Final Cartridge III. Sorry. It seems as though there is a way to temporarily disable the FCIII to allow it to work with NAV… but I can’t figure it out… yet. Feel free to drop me a line if you think you can help.

Download: NAV v9.6 (D64 & PRG) (1259)

source: commodoreserver.com

Pillow-style Commodore 64

February 11th, 2013 No comments

There are not a lot to say about this gadget, the photo speaks for itself. It’s a pillow that has the shape of a Commodore 64, simply a fantastic idea.

source: bieno64.blogspot.com.es

Bidding has ended: € 2.512,00 for the Commodore 64 Gold on Ebay.de

February 10th, 2013 6 comments

source: ebay

Categories: Event(s), News & Rumors, Today

Datastorm 2013: C64 – Official demo party results

February 10th, 2013 No comments

This is the official demo party results from Datastorm 2013 (Top 3 Entries only). See also the CSDB DATASTORM 2013 section for more informations.

C64 Demo:

  • Revolved by Triad
  • Too Old To Rol And Ror by Fairlight + Offence + Prosonix
  • Censor_Matrix by Bob_CD/Censor Design

C64 Music:

  • Monophono by Mahoney/Visa Röster
  • Alpha Bitch by Dane/Booze Design
  • Multiverse by Wiklund/FairLight

C64 Graphics:

  • I WILL SHOW THAT STUPID BUNNY by redcrab/genesis project
  • ST. JOAQUIN by Twoflower/TRIAD
  • Future Sphere by Prowler/Up Rough ^ Nectarine ^ Brainstorm

C64 PETSCII:

  • fågel by acidT*rroreast

Download: Datastorm 2013 Party stuff (1288)

source: datastorm.se

HermIRES v1.26 C64 hires-bitmap editor

February 10th, 2013 1 comment

HermIRES it’s a cross-platform hires bitmap (Art Studio 1 format) editor for the Commodore 64.

The format has some restrictions, here are the rules:

  • The maximal resolution of the picture is 320×200
  • Only 16 fix C64 colours can be used (no gradient either)
  • In a 8×8 pixel-block only 2 colours can used to be displayable by C64 (this is detected in HermIRES, but .hbm files can be saved with clashes too.)
  • On a real C64 the PAL will blur the screen-content a bit, should check on CRT, or at least VICE emulator’s CRT simulation.

Changelog:

Fixed:

  • Pen-shapes are symmetric again. -> solution: 2.23*radius as diameter and 80 as angle-steps.
  • Pen-preview is more accurate now -> solution: typing some ‘-1′ in PenPreview function.
  • 0 sized filled rectangle with dither freezed the app -> solution: when start and end X or Y is equal, only drawing line…
  • Taking tasbar size (30 pixel high) into the resolution-decider equation – more probable for GUI to fit into the screen comfortably.
  • Windows – now the program Icon appears again in taskbar and window-title -> with the new compile.bat (not from DevCpp with Makefile.win)

Download:

source: hermit.netne.net