Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.
Changelog:
- SD2Snes folder is always hidden again.
- Fixes:
- Fix garbled time on initial clock setting (new unit or battery replacement)
- Fix BS-X not booting/booting incorrectly after soft reset.
- Fix OBC1 being always disabled.
- Fix firmware crash when saving after using the serial command line.
Download: SD2Snes Firmware v0.1.7b (947)
source: sd2snes.de
Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.
Here’s what’s new since preview 4:
- Configuration menu. All settings are now available through the menu. Changes take effect immediately after confirming a setting with the A button. It can use some polish but should work fine. Note that the Video Mode settings are only effective on SuperCIC modded consoles.
- SRM files (save files) are now stored in sd2snes/saves/<romname>.srm – existing save files will be moved upon save, there is no batch migration.
Game fixes:
- DMA de-initialization has been reintroduced and changed from $00 to $ff. This reflects a real SNES better and hopefully finally fixes sprite corruption with SGnG and SSF2, AND title screen glitches/crashes with Pocky&Rocky US.
MSU1 enhancements:
- MSU1 volume boost: In case MSU1 audio is too quiet you can now increase volume in several steps. Available via Configuration->Chip Options.
- Interpolation filter to reduce aliasing, resulting in cleaner sound.
- Fixed a bug where volume calculation introduced DC offset to the waveform output. This eliminates clicking or humming on volume changes/fades.
- Changed MSU1 audio playback rate to exactly 44100Hz to match bsnes/higan implementation. Sound that syncs on bsnes should now also sync properly on sd2snes.
- MSU1 resume feature implemented (Thanks to Michaël Larouche!)
Miscellaneous:
- Missing ROM files are automatically removed from the “Recent Games” list. (Thanks to borti4938!)
- Background text is now properly greyed out in the SPC player.
- Ultra16 awareness (mostly thanks to borti4938!):
- Ultra16 serial number and autoboot setting is displayed in the System Information screen.
- Exiting from the SPC player doesn’t crash the menu anymore on Ultra16 consoles.
- Soft reset is prolonged a bit on Ultra16 consoles so you have the opportunity to release the controller buttons, not entering the Ultra16 menu by accident.
- Auto region patching is disabled on Ultra16 consoles so it doesn’t interfere with the Ultra16’s own facilities.
Critical & Minor bugs:
- Firmware locked up when loading Zelda 3 after soft-reset. I am surprised that it actually worked so well with all other games.
- Auto Region Patch setting wasn’t saved properly.
- Satellaview custom time had a garbled default value (year 1035). The default has now been fixed. If you’d like to apply it you can delete your config.yml or just the “BSXTime” entry from it to load the new default.
Download: SD2Snes Firmware v0.1.7a (923)
source: sd2snes.de
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports: 
Release notes Firmware USB HxCFloppyEmulator v3.0.6.7a
- Tandy TL/2 write issue corrected – glitch filter reduced (Probably solve write issue with some others machines too).
- 2 digits display init issue corrected (I2C timeout reduced).
- LCD support: Characters glitches with some long file name corrected.
Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.6.7a (1034)
source: hxc2001.com
Hex file for upgrade/mod the Vogatek A51099 Arcade Supergun 16F505 controller chips by MCJ Design 2007
Installation instruction:
- Simply program the hex file onto 2 * Microchip PIC16F505 chips.
Features:
- Press “A” on Megadrive/Genisis controller on the first power-up (this fixes random key outputs if the 2nd Controller is not used).
- PCB mod (detailed photo in the archive). Press Start + C to add coin/credit.
Gallery of the firmware upgrade:
Download: Hex file for upgrade/mod the Vogatek A51099 (921)
A new version of the firmware for the interface 1541 Ultimate II is released. This version runs only on the 1541 Ultimate II cartridge (new fpga).
Release notes 3.0 beta 5:
Major:
- BUGFIX: Processor’s Data Cache stored result of IO read, causing wrong values to be read from the cache
Minor:
- C64 Keyboard scan made a bit slower (not tested)
- Fixed configuration drop down
- Fixed clock settings
- Mount disk made first option in D64 file type
- Updated Final 3 cart.
Release notes 3.0 beta 4 (first version released on Facebook):
- The FPGA platform has gotten an upgrade. There is now a faster RISC processor on board (~10 times faster), and I have re-written the USB host controller, which has become ~50 times faster. The external memory of the FPGA also runs faster, and delivers now also approx. 7 times more bandwidth. With this faster platform, it has become possible to run a multithreaded OS.
- There is now support for USB2LAN adapters, and 3.0beta4 runs two services: a (raw-)telnet (VT100) server that brings up the menu, and an FTP daemon for basic file transfer.
- There is now support for reading the directories of D71 and D81 files in the browser.
- There is a ‘CD’ command in the software IEC, and other improvements have been made to the soft IEC driver.
- There is now a copy command in the file browser, that works with C=C/C=V (or CTRL-C / CTRL-V). It is not that fast, but for small files it works. You can also copy files from inside a D64/T64 to another location in the file system. The other way around is still under development, but will soon be possible as well.
- UltiCopy is disabled for now, because it still needs to be ported to the multi-threaded operating system.
Download: 1541 Ultimate II Firmware v3.0 Beta 5 (1284)
source: 1541ultimate.net
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports:
Release notes Firmware USB HxCFloppyEmulator v3.0.6.6a
- Some more random crash issues corrected into the disks images managers.
- USB Stack updated.
- Firmware Update strongly recommended!
Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.6.6a (1171)
source: hxc2001.com
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports:
Release notes Firmware USB HxCFloppyEmulator v3.0.6.4a
- Random crash issues corrected into the disks images managers.
Release notes Firmware USB HxCFloppyEmulator v3.0.6.3a
- Some user interface delays added to make it more usable ;)
- “Press select for the Setting menu” text added.
Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.6.4a (1091)
source: hxc2001.com
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports:
Release notes Firmware USB HxCFloppyEmulator v3.0.6.2a
- Normal mode : Endless init loop corrected.
Release notes Firmware USB HxCFloppyEmulator v3.0.6.1a
- Amiga : Disk change detection corrected : Desert Strike, Dizzy Crystal and probably others games disk change detection are now working properly.
- Direct access mode : Correct interface mode set when activated from an PC HD image.
Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.6.2a (1211)
source: hxc2001.com
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports:
Release notes Firmware USB HxCFloppyEmulator v3.0.6.0a
- Low level write layer redesigned : Some write issues solved.
- 2 digits display detection issue corrected.
- HFE : Index timing changed/corrected.
- Select button added at the JA jumper position.
- This additionnal button and the I2C LCD screen allow you to freely select a file image without the indexed mode or any selector software.
- Indexed mode : “Previous”/”Minus” button repeat rate reduced.
Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.6.0a (1075)
source: hxc2001.com
Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.
Download: SD2Snes Firmware v0.1.7 Beta/Preview Rev 4 (1393)
Full Changelog:
- Prevent software from using uninitialized DMA ch.0 transfer to corrupt the stack (fixes Nightmare Busters)
- Disable PPU region patching during the menu
- MSU1: Stop audio playback on reset (fixes static buzzing noise in games after soft-resetting out of an MSU1 game)
- Cx4: Add a switch for original/fast mode. “Original” mimics the Cx4 timing better (Megaman doesn’t die in MMX2 attract mode) whereas “Fast” uses a single CPU cycle for every instruction, improving frame rate when drawing polygons (rotating head in MMX2 intro).
- Hide dot files and directories again (Regression in 0.1.7).
- “Stealth Mode” for in-game hook memory area hides the memory region used by in-game routines from games. (Fixes Equinox, Lion King)
- In-game hooks are a bit less intrusive in terms of CPU time, hopefully reducing glitches a bit with problematic games.
- System Information screen shows file system usage on card.
- Slow down DSPx a bit to better match original speed (should have no noticeable effect)
- Font height is reduced by one pixel to increase readability (lines of text are more distinguishable). This has an effect on the font style so some might not like it…?
- Background is greyed out when a window is active in foreground
- Menu now uses the dynamic hierarchical menu system, with automatic calculation of window dimensions, etc. Not much of it can be seen at the moment due to the lack of menu entries.
- Experimental SRAM mapping for Cx4
- FPGA: adjust address sampling time for “end-of-cycle” events. Should help primarily with DSP1 glitches.
- MSU1: initial volume now adheres to the latest spec (initial volume = 0) so it must be initialized by software to the desired level. This actually breaks my own example player I will post an updated version of it shortly.
Read more…
Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.
This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.
The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick
The HXC Usb (Gotek) firmware supports:
Release notes Firmware USB HxCFloppyEmulator v3.0.5.4a
- Amiga : Extra Disk change delay added. Solve some disk change issues (Protracker 3.15, Defender of the Crown,…).
Download: USB Stick STM32 (Gotek) HxC Firmware v3.0.5.4a (1922)
source: hxc2001.com
It was released a new OS Update for the Everdrive N64 Flash Cartridge (Nintendo 64) by Krikzz. The upgrade instructions can be found here.
Changelog:
- 2.09 (21.01.2015)
- “CRC Check” option to enable/disable CRC check
- FPGA code update
- 2.06 (12.11.2014)
- Fully functional GameShark. Special thanks to Parasyte and Modman for new GS core!
- Automatic save and loading GS codes when user change the game. “Auto cheat” option should be enabled
- Fixed graphics bug in “RTC setup” menu (ED64 V3)
Download: Everdrive N64 - OS Update v2.09 (1308)
source: krikzz.com
Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.
Full Changelog:
A minor update, mainly in the name of stability. This hopefully eliminates glitches unrelated to the in-game buttons on some consoles, e.g. Seiken Densetsu 3 rebooting intermittently or graphical glitches in DKC 2+3, that had been introduced with v0.1.7 preview 1.
- Reintroduce more aggressive filtering for control and address lines from the SNES, previously removed after v0.1.6
- Unify and centralize signal edge detection for all sub-units (e.g. S-RTC, MSU1, BSX, DSP etc.) instead of each unit having its own (slightly different) edge detection.
- In-game controller scan has become slightly more time effective under certain circumstances (Auto Joypad Read enabled but no NMIs).
- In-game hooks are now disabled for 10 seconds after loading or resetting a game to help certain games get past their boot screens. This will be configurable in the final.
- Reconfigure the FPGA only when necessary on warm reset, speeding up “reset to sd2snes menu” by a couple hundred milliseconds.
- Fix an MMIO access priority bug for DSPx.
- Fix BS-X ROM detection for games with 2 startups left.
- Fix directory browsing being broken after setting the clock.
Download: SD2Snes Firmware v0.1.7 Beta/Preview Rev 3 (1418)
source: sd2snes.de
It was released a new OS Update for the Everdrive N64 Flash Cartridge (Nintendo 64) by Krikzz. The upgrade instructions can be found here.
Changelog:
- After reset, file browser returns where you was before than run the game, instead of just go to the root.
- Users can change default save type in save_db.txt
- ED64-V3 support.
- Fixed default save type for some games.
- Changed save memory initialization, it fix the problems with some games.
- Fixed possible problems with sram and flash ram saves.
- Fixed ramnom hangs after reboot.
- Self test function. Cart stability diagnostic.
- Improved eeprom implementation.
Download: Everdrive N64 - OS Update v2.05 (1123)
source: krikzz.com
Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.
Full Changelog:
It addresses some issues reported with v0.1.7 preview (and some others).
- Satellaview works again. BSX alters the original interrupt vectors at run time. The original interrupt vectors are now saved per hook call, not only once when loading the ROM.
- In game buttons now work with MSU1, too.
- Automatic hook method choosing: NMI is default but switched to IRQ when no NMIs are triggered. If both occur, NMI has priority. This should enable the in-game buttons for games that previously did nothing.
- The hook routine saves some CPU time when auto joypad read is enabled by the game – it will just reuse the result instead of doing its own controller scanning. Also the controller is now only scanned every 8 frames. This helps alleviate some glitches, e.g. Secret of Mana now starts up correctly. There are still some glitches left which can’t be eliminated fully.
- Auto region patching works again without having to delete the sd2snes.cfg.
- BSX now emulates Type 1 memory packs instead of Type 2. Apparently the BSX BIOS is buggy with Type 2 packs when they contain HiROM games that are supposed to be run from PSRAM. So, at least Bomberman works now, and probably others too.
- Fixed BSX PSRAM shadowing for HiROM.
- Files and directories with “hidden” or “system” attributes are now actually hidden from the file browser.
Download: SD2Snes Firmware v0.1.7 Beta/Preview Rev 2 (1477)
source: sd2snes.de
Recent Comments