A new version of the firmware for the interface 1541 Ultimate is released. This version runs on both version of the Ultimate 1541 cartridge.
Version 2.4a includes the fixes that TLR made to the firmware, and adds the following features:
- Bitfiles don’t need (and can’t) be flashed on a 250E… (fix for MK1)
- Version updated to AC for MK1 as well (otherwise the software will annoy you until you die!)
- Cartridge list shortened. This avoids crash on cart change in config.
Download:
source: 1541ultimate.net
A new version of the firmware for the interface 1541 Ultimate is released. This version runs on both version of the Ultimate 1541 cartridge.
Version 2.4 includes the fixes that TLR made to the firmware, and adds the following features:
- CRT load (just by selecting the file, not on boot time)
- EasyFlash support (reading only, writing is not needed IMHO)
- Flashing and running custom FPGAs (Ultimate-II only), especially for those who want to do FPGA development without JTAG cable. FPGA bitfile will be flashed into the spare area of the Flash memory device, and the FPGA is booted from there. So there is no risk of bricking your device. (Flashing needs to be done for every boot still, optimizations will follow.)
For the rest, a lot of work has been done ‘under the hood’; especially in preparation of a native command interface to control the Ultimate from I/O space. But since this is not yet ready, it’s not included (=not enabled) in the 2.4 firmware.
Download:
source: 1541ultimate.net
SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 or ATmega1284p microcontroller from the Atmel AVR microcontroller family.
The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller’s firmware is available as open source (GPL).
Changelog:
2011-12-18 – release 0.10.2
- Bugfix: End of generated raw directory was incorrect.
- Bugfix: Various compilation fixes when fastloaders are disabled.
- ULoad M3 automatically exits when ATN becomes active.
- Minor code space improvements.
- New fastloader: ELoad Version 1 (EasyProg)
Download:
source: sd2iec.de gitweb forum thread c64-wiki
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Release notes for the HxCFloppyEmulator software v1.6.11.15:
- zlib updated : zlib 1.2.5
- New files Support : Winimage *.IMZ file.
- New files Support : *.GHK (Ensoniq EPS) file image support.
- Oric DSK : Deleted address mark support added!
- TI99/4A TI99PC99 loader : sector search function corrected.
- TI99 V9T9 format : New disk geometry supported, double sided disk support corrected.
- … full release notes here
Download: HxCFloppyEmulator software v1.6.11.15 (1049)
source: hxc2001.free.fr
Turbo Chameleon 64 is an extremely user-friendly cartridge that can be used without opening the computer. It is just plugged to the expansion port of the C64.
The Turbo Chameleon 64 cartridge can also be operated as a stand-alone unit (since it’s basically an FPGA computer like the C-One or the Minimig in a C64 cartridge case), replacing the computer, the floppy drive and the heavy power supply.
When used as a stand-alone unit, a USB power adapter or active USB hub can be used as a power source.
Changelog:
Differences from Beta-6f to Beta-6g:
- Implemented bit-fade in SID when no waveform is selected.
- Implemented bit-fade in SID when reading write-only registers.
- Added bits to detect in menu when disk-images need update after write actions by the emulated drives.
- Implemented “door” on emulated drive, when open drive will read dummy bytes.
- Fixed CPU instruction timing bugs discovered when comparing emulated 6510 against real 6510.
- CPU irq/nmi timing fixes.
- Implemented bit-fade on I/O port of emulated 6510.
- Fixed SID stereo mapping for D500 and D700.
- Four timers added at addresses D0AA to D0AD for menu (it can’t use CIA timers when freezing).
Download: Firmware Chameleon Beta 6g (1488)
source: syntiac.com
This is an AVR MMC/SD boot loader compatible with HolgerBootloader2. Based on a heavily modified version of ChaN’s FatFs library.
SD2IEC is a hardware mass storage device using an SD/MMC card and interfacing with the IEC bus. It is based on the ATmega644 or ATmega1284p microcontroller from the Atmel AVR microcontroller family.
The most prominent use of SD2IEC is emulation/replacement of a Commodore-1541 disk drive for a C64. Hardware and the microcontroller’s firmware is available as open source (GPL).
Changelog:
2011-09-12 – release 0.2
- Added petSD configuration.
Download: SD2Iec bootLoader v0.2 (1573)
source: sd2iec.de gitweb forum thread c64-wiki
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Release notes for the HxCFloppyEmulator software v1.6.11.6:
- New files Support : Roland W30 file image support.
- BUG : HFE writer buffer overflow corrected.
- SAP Thomson file support Enhanced.
- STT Atari ST file support : Track signature check added.
- … full release notes here
Download: HxCFloppyEmulator software v1.6.11.6 (1014)
source: hxc2001.free.fr
This is a custom firmware build for the 1541 Ultimate II by Daniel Kahlin (tlr).
This version of the firmware addresses a few things that needed improvements.
Full History:
- Rebased to the 2.3 release. (svn r88)
- Rebased to the 2.2 release. (svn r71)
- Added GPL 3.0 license as stated by Gideon in the 1541 Ultimate-II (Fixes Bug 110 “License file (GPL) missing in source repository.”)
- Fixed filename length in print out during DMA loading.
- Added “Real Run” for files inside .d64 files which mounts, loads and runs using the BASIC prompt.
- Added “Run Tape” for .tap files which mounts tap and does LOAD/RUN using the BASIC prompt.
- Added “Run Disk” for .d64 and .g64 files which mounts, loads and runs “*” using the BASIC prompt.
- Added detection of cyclic links in .d64 directories and files. (Fixes Bug 94 “Hang when entering diskimage.”)
- Added sanity check of sector links in .d64 directories and files.
- Search until end of directory, even when hitting files with t=0. (Fixes Bug 98 “No dir listing with DEL file linked to T0, S0.”)
- Based on the 2.1 release. (svn r65)
- RUN/LOAD/mount has been reworked to hopefully be more clean. (Fixes Bug 109 “CLR/HOME ctrl code sometimes visible on running file from browser.”)
- Made DMA loading simulate the look of normal loading.
- Corrected mixup of disk id. (Fixes Bug 79 “id1 & id2 mixed in disk_image.cc (Skate or Die disk/sector id bug)”)
- Cherry-picked fix for SDCard rename from trunk. (svn r66) (Fixes Bug 105 “Renaming SDCard via U-Menu corrupts root directory.”)
- Submenues can now be exited using CRSR-left in addition to R/S. (Implements Wish 77 “Exit submenu using CRSR-left in file browser.”)
Download: 1541 Ultimate II Unofficial firmware v2.3 (tlr) (1353)
source: 1541ultimate.net
A new version of the firmware for the interface 1541 Ultimate is released. This version runs on both version of the Ultimate 1541 cartridge.
Major improvement in latest release:
- REU fixed.
- Timing module for cartridge slot simplified to make things work on an SX-64.
- D64 listing corrected for some non-conformant files.
- Most audio options disabled for Ultimate-I.
- A lot of small things modified under the hood (not yet visible as feature for the user.)
- Some testing done on both Ultimate-I as well as Ultimate-II.
Download: 1541 Ultimate II Firmware (1177)
Download: 1541 Ultimate I (Plus) Firmware (1097)
source: 1541ultimate.net
Turbo Chameleon 64 is an extremely user-friendly cartridge that can be used without opening the computer. It is just plugged to the expansion port of the C64.
The Turbo Chameleon 64 cartridge can also be operated as a stand-alone unit (since it’s basically an FPGA computer like the C-One or the Minimig in a C64 cartridge case), replacing the computer, the floppy drive and the heavy power supply.
When used as a stand-alone unit, a USB power adapter or active USB hub can be used as a power source.
Changelog:
Differences from Beta-6c to Beta-6d:
- Cartridge emulations.
- Turbo speed increase: Eliminated one clock cycle from critical path.
- Turbo speed increase: Writes to memory concurrent with next instruction fetch.
- Turbo speed increase: MMU caches last used CPU slot.
Download: Firmware Chameleon Beta 6d (1514)
source: syntiac.com
Turbo Chameleon 64 is an extremely user-friendly cartridge that can be used without opening the computer. It is just plugged to the expansion port of the C64.
The Turbo Chameleon 64 cartridge can also be operated as a stand-alone unit (since it’s basically an FPGA computer like the C-One or the Minimig in a C64 cartridge case), replacing the computer, the floppy drive and the heavy power supply.
When used as a stand-alone unit, a USB power adapter or active USB hub can be used as a power source.
Changelog:
Differences from Beta-5b to Beta-6:
- Fixed RAM mirrors for 1541 drive emulation.
- Fixed reading from emulated SID.
- New cartridge emulations.
- Disk track lengths set to 6256, 6672, 7144 or 7696 bytes.
- Implemented disk-change with button.
- Input latch emulation in VIA emulation.
- Implemented SDR register in CIA.
- Implemented real IEC bus disable bit.
- VIC-II timing fixed for mode bits (MCM, BMM and ECM)
Differences from Beta-6 to Beta-6b:
- 1541 emulation: fixed IEC timing. All known speedloader problems are gone now.
- 1541 emulation: VIA6522 timer fixes.
- 1541 emulation: VIA6522 register r/w fixes.
- New cartridge emulations.
Differences from Beta-6b to Beta-6c:
- Auto speed option for turbo feature. Slows down on IEC bus accesses.
- PS/2 Page up/Page down alias for F1, F7. Easier navigation in the File-Browser.
Download: Turbo Chameleon 64 beta firmware v6c (1516)
source: syntiac.com
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Release notes for the HxCFloppyEmulator software v1.6.9.0:
- New files Support : Kurzweil KRZ file support.
- New files Support : EDE EDM (Ensoniq Mirage) file image support.
- A new “About” window ;).
- … full release notes here
Download: HxCFloppyEmulator software v1.6.9.0 (972)
source: hxc2001.free.fr
A new version of the firmware for the interface 1541 Ultimate II is released. This version only runs on the Ultimate-II! Release for Ultimate-I (MK1) will come very soon.
Major improvement in latest release:
- MAJOR bug fix: Updater caused to unit to fail when “Force update” was selected on the first batch Black boards (with Atmel Flash)…
- Updater updated: Now possible to clear all configuration pages in flash.
- Issue fixed with configuration of objects that did not have a config page yet (write/effectuate decoupled).
- Issue fixed with re-freezing into an empty D64 (or file with headers but no items); caused a blank screen.
- Version number of FPGA increased [to $A6], because REU was fixed. (See previous commit).
- Simulation environment set up for REU.
- REU verify bug fixed. More testcases to be added.
- …/target/simulation/sim/$ make reu_tc_1.gui will start ModelSim with the REU testcase.
- Missing simulation package added.
- SdCard cannot be renamed, of course… fixed…
- Build of MK1 firmware fixed, using the 250E FPGA.
- Makefile changed to output a warning when ISE locations from the project is used, instead of your own.
- Tested on ‘clean’ system with Xilinx ISE 13.1 installed.
- Missing file added: sid_mapper.vhd. Why did nobody notice this? :D
download: 1541ultimate.net
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Release notes for the HxCFloppyEmulator software v1.6.8.1:
- Amiga/UAE Extended ADF file (new format) loader : crash corrected (Bitrate corrected).
- All Amiga loader (IPF,ADF,DMS…) : Index timing adjusted.
- Track encoder : Amiga track post gap corrected.
- … full release notes here
source: hxc2001.free.fr
The HxC Floppy Drive Emulator is a software and hardware system created by jfdn aka Jeff.
The aim of this project is to replace the floppy disk drive by an electronic device emulating the floppy disk drive (list of supported Computer/Hardware).
There are two differents emulators:
- A USB version which allows to connect the floppy disk drive interface of the computer to a PC via a USB cable.
- A SDCARD version which allows to emulate floppy disks which images are stored in a SDCARD.
Release notes for the HxCFloppyEmulator software v1.6.8.0:
- New track generator implemented.
- Use of the new track generator for Most of file loaders.
- New files Support : *.ADF Amiga/UAE Extended ADF file format (old and new format)
- New files Support : *.ADF Acorn file format.
- New files Support : *.SSD/*.DSD Acorn BBC file format.
- New files Support : *.ADL Acorn BBC file format.
- New files Support : *.D77/*.88D/*.D8U/*.2D/*.D68
- New files Support : *.FDI file format. (Zx Spectrum…)
- New files Support : *.LDF (CamputersLynx) file format. (Beta)
- New files Support : *.D81 file format (C64+1581). (Beta)
- New files Support : *.DMK file format (TRS-80)
- New files Support : *.vegasdsk file format (“Tavernier” / Vegas 6809)
- D88 files Support : 1DD format support.
- … full release notes here
source: hxc2001.free.fr
Recent Comments