A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.

Changelog:

• Improve search text editor and allow joystick input. Thanks mwedmark.
• Improve disk emulation with support for block read/write and custom vectors. Thanks CommFor.
• It is now possible to enter a search string using the joystick. Press fire and up to start the editor and edit the text with the following joystick controls:
  • Up/down: Select a character
  • Left/right: Change cursor position
  • Fire and left: Delete
  • Fire and down: Clear search
  • Fire and right: Space
  • Fire and Up: Insert

Download:

• Kung Fu Flash Firmware v1.40 (562)

source: github.com/KimJorgensen/KungFuFlash

A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.

Changelog:

• Fix timing problems on some C64s (since v1.38). Thanks chris

Note:

Disk emulation is now active by default when launching PRGs. If this is not desired or if the PRG requires EF3 USB support then the old load option is still available in the file options menu (shift+return or long press fire).

A lot of changes has been made to optimize the C64/KFF communication. Please let me know if you detect any broken functionality in this release

Download:

• Kung Fu Flash Firmware v1.39 (576)

source: github.com/KimJorgensen/KungFuFlash

A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.

Changelog:

• Improve disk write support.
• Optimize SD card access.
• Small performance optimizations.

Note:

Disk emulation is now active by default when launching PRGs. If this is not desired or if the PRG requires EF3 USB support then the old load option is still available in the file options menu (shift+return or long press fire).

A lot of changes has been made to optimize the C64/KFF communication. Please let me know if you detect any broken functionality in this release

Download:

• Kung Fu Flash Firmware v1.38 (566)

source: github.com/KimJorgensen/KungFuFlash

A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.

Changelog:

• Optimize VIC-II read access for ultimax cartridges (issue #94)
• Disk emulation support large PRGs
• Improve disk emulation loading speed
• Load and mount is now default for PRGs

Note:

Disk emulation is now active by default when launching PRGs. If this is not desired or if the PRG requires EF3 USB support then the old load option is still available in the file options menu (shift+return or long press fire).

A lot of changes has been made to optimize the C64/KFF communication. Please let me know if you detect any broken functionality in this release

Download:

• Kung Fu Flash Firmware v1.37 (589)

source: github.com/KimJorgensen/KungFuFlash

A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.

Changelog:

• Support VICE v2.0 CRT file format (C64 and C128)
• Support WarpSpeed 128

Download:

• Kung Fu Flash Firmware v1.35 (579)

source: github.com/KimJorgensen/KungFuFlash

A new version of the firmware for the Kung Fu Flash Cartridge by Kim Jørgensen is released.

Changelog from version v1.21 to 1.34:

• Fix broken mount D64 file option (since v1.33)
• Improve disk drive emulation to support Sidplay64. Thanks Actarus, Fabuseta, mwedmark, and Seni1ix
• Support basic SD2IEC commands.
• Optimized code to make it all fit in flash.
  • In this version the following cartridge types will not require the firmware file on the SD card:
  • Normal cartridge (8k, 16k, Ultimax)
  • Fun Play, Power Play
  • Super Games
  • Ocean type 1
  • Epyx Fastload
  • C64 Game System, System 3
  • Dinamic
  • Zaxxon, Super Zaxxon
  • Magic Desk, Domark, HES Australia
  • EasyFlash
  • Prophet64
  • RGCD, Hucky
  • Drean
  • C128 Normal Cartridge (external function ROM)
• Combined PAL and NTSC firmware.
• T64 support (normal tape files only). Thanks Matthias.
  • The firmware has been extended to support both PAL and NTSC and this requires the KungFuFlash_v1.30.upd file to be kept in the root directory of the SD card.
  • Older firmware will not support this extended format so KungFuFlash_v1.30_upgrade.upd must be used first. This file is not needed after the upgrade process has been completed.
• Fix broken EasyFlash VIC-II/C128 mode. Thanks mrr19121970.
• Improve detection of C64 clock signal.
• Add simple diagnostic tool.
  • The diagnostic tool is started by pressing the menu button for 2 seconds (until the LED turns off) and is intended to help debug stability problems on some C64 models.
  • The tool can also be started in a USB only mode if Kung Fu Flash refuses to start at all. In this mode debug data is send via USB only and the C64 should start normally (boot to Basic). This mode is started by pressing both the special and menu button for 2 seconds, then releasing the menu button followed by the special button.
  • For reference the phi2 clock frequency should be around 985248 Hz for PAL and around 1022727 Hz for NTSC.
• Add support for Drean cartridges. Thanks beatmaster13.
• Add support for C128 normal cartridge. Thanks phako.
• Fix unstable EF3 USB. Thanks dikdom.
• Add support for Super Games cartridge.
• Add support for Prophet64 cartridge.
• Fix broken Fun Play/Power Play cartridge support (since v1.16)
• Add support for RGCD and Hucky cartridges. Thanks Konstantin19.
• Load extensionless files as PRG.
• Add support for WarpSpeed by SvOlli. Thank you.
• Add support for Freeze Frame/Freeze Machine. Thanks gold11-carca.
• Fix bug reading UPD file using FAT16. Thanks cosmo6128.

Download:

• Kung Fu Flash Firmware v1.34 (725)

source: github.com/KimJorgensen/KungFuFlash

A new version of the firmware for the AVGCART (SD multicart for 8bit Atari) by tmp is released

Changelog (v0024):

• PDS/COV/COS files run PDSPLAY/COVPLAY/COSPLAY
• added ability to select (TAB) CAR files
• selected files (ATR, CAS, CAR) don’t have to be in the same directory anymore, selection is cleared only after returning to the selector
• ENTER on ATR/CAS/CAR file will replace the selection so SPACE was added to run with selected files, ignoring current file under cursor
• search now allows navigation during searching and editing search string
• CTRL-L disables item shortcuts and allows starting search by typing instead of ‘/’
• ESC stops search, exiting search requires 2x ESC (to prevent accidental exit when search stops at the same time user tries to stop it)
• disable cart was changed to SHIFT-ESC
• short filenames should finally (hopefully) have proper case
• filenames longer than screen width should be (finally) properly sorted
• type 57 (2kB) fixed
• right cart button will disable cart for carts <= 16kB (to make some CS turbo carts work)

New keys:

• SPACE – run selected files (ignores item under cursor)
• CTRL-L – toggle key shortcuts

Changed keys:

• ESC -> SHIFT-ESC (disable cart and reboot)

Changelog (v0023):

• [ECI] Auto-enable cart menu after reset (CTRL-SHIFT-E to enable, CTRL-E to disable)
• [ECI] Patched OS for ATR emulation is forced as ROM, not just loaded into RAM under ROM, increases compatibility
• [ECI+SIO] When emulating ATR, HSIO patched OS with inverted OPTION (BASIC off) is forced

Changelog (v0022):

• [ECI] EXTMEM support up to 512kB (CTRL-SHIFT-M to enable, CTRL-M to disable)

Download:

• AVGCART [0024] (501)
• AVGCART Manual (688)

source: atariage.com

Firmware upgrades for THEC64 Mini/Max & TheVIC20 provide new features and/or correct any technical issues.

We always recommend that you use the latest version of the firmware.

Version 1.6.1 – Changes and additions:

• [All models] Adds Commodore 1351 mouse support to the C64
• [All models] Adds support for up to four joysticks
• [All models] Adds support for THEMOUSE
• [All models] Adds support for THEGAMEPAD
• [All models] Adds a new game Space Lords, a multi-player game that utilises the new mouse and multi-joystick support

Changes from previous versions:

• v1.5.2 – [THEC64 European] Fixes inconsistently displayed Blue Star carousel cover image
• v1.5.2 – [All models] Allows the primary C64 joystick port to be switched in-game
• v1.5.2 – [THEC64 Mini] Adds C64 only Classic mode
• v1.5.2 – [THEC64 Mini] Adds disk swapping for multiple disk games
• v1.5.2 – [THEC64 Mini] Adds soft and hard reset hot-keys to Classic mode
• v1.5.2 – [THEC64 Mini] Adds freeze button support to Classic mode
• v1.5.2 – [All models] Adds Commodore REU support with 512K, 2MB or 16MB as filename flags or CJM parameters
• v1.5.2 – [THEC64 Mini] Hessian (C64) and PET Snake (C64)
• v1.5.2 – [THEC64] Hessian (C64), PET Snake (C64), City Crusher (VIC20) and Mine Sweep (VIC20)
• v1.5.2 – [THEVIC20] Hessian (C64), PET Snake (C64), City Crusher (VIC20) and Mine Sweep (VIC20)

Download:

• TheC64/TheVIC20 Firmware v1.6.1 (9019)

source: retrogames.biz

A new firmware update for the ARMSiD has been released by Nobomi.

News features and fixes in FW 2.13:

• Further optimization of code speed and size. Also bus operations are faster, finally “paddles” are successfully read on NTSC machines even with the oldest HW versions of ARMSID (with components on top) !
• ARMSID start is also faster. Instead of hundreds of milliseconds, ARMSID is fully functional in less than 15 milliseconds after power-up !
• Added the possibility to “fix” the so-called ADSR bug, i.e. a bug in the envelope generator, which is inherent to the original chips and is reproduced in ARMSID too. This is not needed in the C64 for compatibility reasons, but if you use ARMSID in synthesizers, you might be interested in this feature.
• Slightly modified quality (Q) of filter circuits for even more faithful reproduction of MOS8580.

Download: ARMSiD v2.13 (506)

source: nobomi.cz

Ikari has released a new firmware for the SD2Snes Flash Cartridge (Super Nintendo/Famicom). The upgrade instructions can be found here.

Sorry for the delay, but it just escaped me to post it here.

Features added:

• [All] USB (usb2snes) support by RedGuy
• [All] save state support (via USB/savestate2snes) by RedGuy
• [All] stand-alone save state features by FURiOUS
• [All] some compatibility improvements and optimizations for stand-alone save states by ikari_01
  • Add support for YAML list items for multiple savestate_fixes entries per game
  • Add support for simple bitwise operations on savestate_fixes patches
  • Add support for verbatim code execution on savestate_fixes patches – notably fixes Star Ocean (decompressed) save states (however the save state hook still needs CPU time optimization to prevent music glitches in Star Ocean.)
  • Add IRQ support on top of NMI for the save state hook – this enables save states on Out Of This World and possibly other games that only use IRQ. Also fixes controller input capture on a number of games so the game-specific input hacks could be eliminated.
  • Moved save state code outside of the USB hook area to make room for USB hook execution.
• [All] SGB support by Redacted173.
• [All] favorite games list by freelancer42

Fixes:

• [All] Fixed data caching bug in MSU1 data extension which could cause wrong data to be streamed
• [All] Savestates: do not try to capture data that is already in cartridge space anyway (e.g. SRAM). Fixes text distortion in Near’s Bahamut Lagoon translation when loading a state.
• [All] Fixed YAML config parser to support comment signs after list start items
• [All] Fixed SNES open-bus contamination (fixes sprite flickering in Near’s Bahamut Lagoon translation, certain speed runs that rely on open bus behaviour)
• [All] (hopefully) fixed rapid data line toggling sometimes resulting in address line glitches, causing random crashes in extreme cases, and occasional garbled graphics on SMRPG among others
• [All] Fixed data integrity problems when loading BSX games

Download:

• SD2Snes Firmware v1.11.0 Beta 1 (677)

source: sd2snes.de

Jean-François DEL NERO (who’s behind the HxC SD Floppy Emulator) recently has released a version of the HxC emulator firmware that is compatible with the STM32 chip used in the Gotek floppy emulators.

This means that the great functionality of the HxC SD emulator is now available on cheaper and more widely available hardware.

The bootloader to convert the Gotek floppy drive in HxC compatible must be purchased on the website HXC 2001 by sending an email to Jean-François DEL NERO. The price of the bootloader is one-off 10 Euro per Gotek that you want to update. Future updates of the software are free and can be made from a USB stick

The HXC Usb (Gotek) firmware supports: + many more….

USB Stick STM32 (Gotek) HxC Floppy Emulator Firmware v3.4.16.4a -> v3.8.1.2a cumulative changelog:

• Build-in USB stick init / format function :
• The USB stick can now be formatted/initialized for the “Image-less mode” by the firmware.
• Remove the USB stick, press both buttons to enter the embedded menu and select the sub menu to activate the format mode :
  •  - 7 digits display “d” menu entry -> Should display “For”
  •  - OLED display “Format USB Key” menu entry.
  • Then insert the USB stick you want to format.
  • WARNING : Formatting will erase all data on the USB stick !
  • The default built-in image is an HD 1.44MB Floppy disk, but you
  • can select another built-in image on the firmware customization
• SFRKC30 / SFR1M44-U100LQD Gotek support enhanced :
• The new rotary port is now supported.
• New explicit U100LQD OLED configuration.
• (Specific binaries for this new Gotek are now provided in the “New_U100LQD_Gotek” folder)
• The detected hardware model can now be read in the embedded menu
• (Sub menu ‘F’ for the 7 digits Gotek and in the “FW/HW version” sub menu for the OLED Goteks).
• Hardware ID definitions :
  • 000 : Original STM32F105 Gotek (64KB of RAM)
  • 001 : 64 pins ARTERY AT32F415RCT7 on an old STM32 Gotek board (32KB of RAM)
  • 002 : 48 pins ARTERY AT32F415CBT7 (New board) (32KB of RAM)
  • 003 : 64 pins ARTERY AT32F415RCT7 (New SFRKC30 / SFR1M44-U100LQD Gotek : Native OLED and Rotary support) (32KB of RAM)
• Test firmware updated to support all STM32 and Artery Goteks.
• Some important fixes in the emulation from folder mode
• (Informations about this mode are available on this page : https://hxc2001.com/docs/gotek-floppy-emulator-hxc-firmware/pages/emulation-from-folder.html)
• The emulation from folder mode was broken on ARTERY MCU based Goteks.
  •  Update recommended for all “emulation from folder mode” users !
• New SFRKC30 Gotek boards support added :
  •  This new Gotek revision has a new rotary port and will be shipped
  •  with a rotary switch and an OLED screen directly from the factory
  •  (No “mod” required anymore)
• Bootloader updated.
• Firmware updated.
• Firmware customization page updated.
• Normal/direct selection mode :  File sorting optimized for low memory “Artery” Goteks.
• 1680KB Distribution Media Format (DMF) .IMG support adjusted / fixed.
• Firmware STM32 USB HxCFloppyEmulator v3.7.1.4a for all Artery AND STM Goteks ! ( -> In the “Artery_AT32_Gotek_HxC_Firmware” folder !)
• Update recommended for Artery Goteks users:
• “Normal mode” / Direct stick browsing mode :
• Fix regression with Artery Goteks  ! (Crash due to a memory alignment issue)
• Custom firmware page updated
• Build tools updated.
• RAM Memory management enhanced : Detect the RAM size and change/adapt  the cache buffers size according to the available memory.
• Compatible with all Goteks (Artery and STM MCU compatible).
• Now support all Artery versions (AT32F415RCT7, AT32F415CBT7…)
• Fixes : EPROM emulation support, Index signal.
• Rotary connections moved to PA13/PA14 (2 pins in the prog header) for the 48 pins MCU version.
• Firmware STM32 USB HxCFloppyEmulator v3.6.1.2a for Artery AT32F415RCT7 Goteks ( -> In the “Artery_AT32_Gotek_HxC_Firmware” folder !)
• Since March/April 2021 we can see some new Gotek variants on the market.
• Due to the electronic components shortage, these new Gotek revisions use different MCUs.
• The STMicroelectronics STM32F105 MCU was replaced by Artery MCUs : AT32F415RCT7, AT32F415CBT7,…
• These MCUs are “mostly” compatible with the previously used STM part but there is an important difference : The RAM size. While the STM32F105 offers 64KB of RAM, these Artery parts have only 32KB of RAM. These changes imply modifications in the firmware.
• A first HxC Firmware compatible with the AT32F415RCT7 MCU can be found in the Artery_AT32_Gotek_HxC_Firmware folder.
• The bootloader was updated this week to support all the 3 Gotek variants:  STM32F105RB6, AT32F415RCT7,AT32F415CBT7.
• The bootloader now supports GPT/GUID formatted USB sticks.
• The server was updated this week to support all the 3 Gotek variants :
• The bootloader can installed on all these Gotek using the normal online procedure :  https://hxc2001.com/docs/gotek-floppy-emulator-hxc-firmware/pages/bootloader-installation.html
• Preparing the firmware for the next releases / features : Important code size optimizations. (First round !)
• OSD : The HSYNC polarity can be set on the custom firmware
  • (VSYNC already supports both polarity)
• Finally introducting the Raspberry Pi Zero W Gotek companion :
  • https://hxc2001.com/download/floppy_drive_emulator/RPiZeroW_HxC2001_StickEmulator.zip
  • (To be installed on the SD Card with rufus, dd, …)
  • Use the USB device port to connect the Raspberry Pi Zero W to the Gotek.
  • You can access the virtual stick through Wifi.
  • The Raspberry is by default setup as an access point. (HxC2001_RPIZeroW SSID)
  • The following services are currently enabled in the image :
  • IP :  192.168.100.1
  • Samba/Windows Share -> login : data, password : data
  • ftp -> login : data, password : data
  • ssh -> login : data, password : data / login : root, password : root
  • http -> just a test page for the moment.
• IMG file images : Fix Technics SX-F100 organ format and file deletion support.
• HFE files : Blind write mode now used on all non-MFM/FM HFE files.
• Quickdisk .QD files write support : Some fixes and improvements.
• Code improvements.
• Roland machines out,img,ima files support : sector interleave and track skew adjusted to the S-550 values. (Fix S-550 issues).
• Internal parameters : Power-up clear/reset right button timeout set to 3 seconds.
• Electone EL-900 disk change issue fixed :
• Clear internal ready timer at image selection.
• Internal default ready timing changed from 200ms to 400ms.
• v3.5.1.1 regression fix : Broken USB stick folder Auto mount feature fixed.
• Major release : Image-less mode support! Mount USB stick’s FAT12 partitions !
• USB Stick : GUID Partition Table (GPT) support. The firmware now support medias with GPT, MBR or without any partition table. GPT is becoming the default partition table used by most operating systems.
• New custom firmware page option:
  • GUID Partition Table (GPT) support option (enabled by default).
• Regression fix : Fix Amiga 1.76MB HD .ADF images support.
• Upside down orientation OLED screen option.
• “Normal mode” / Direct disk browsing mode : Fix possible erroneous “No file image found !” message issue. Update recommended.
• Amstrad CPC / ZX Spectrum EDSK & DSK:
  • Fake Track ID protection support.
  • Fake Side ID protection support.
  • Bad CRC protection support.
  • 6144 bytes sectors support fixed.
• (Fix the following copy protected ZX Spectrum games :
  • Robocop 2,Turrican 2,Barbarian 2,New Zealand Story,
  • Dan Dare 3,Operation Thurderbolt,Simpsons and probably others titles).
• Amstrad CPC / ZX Spectrum EDSK & DSK  : Fix deleted data mark support.
• v3.4.16.2a regression fix : Fix file selector issue on fast Amiga machines (>= A1200).

This is only a little part of the changelog. The original one is very long and you can read it here. (instruction manual here)

The HxC Floppy Emulator Firmware Customization page: https://hxc2001.com/custom_fw/

Download: USB Stick STM32 (Gotek) HxC Firmware v3.8.1.2a (872)

source: hxc2001.com

A new version of the firmware for the AVGCART (SD multicart for 8bit Atari) by tmp is released.

Changelog (v0021):

• XEX loader now doesn’t occupy $0800 page
• ATR/ATX emulation fixes (Bruce Lee, Ultima, Flight Sim II)
• Allow IDE emulation together with ATR emulation (SIO)
• Show COM/EXE files in browser
• Increased limit of virtual drives to 8 (SIO)
• Autorun key changed from ‘A’ to ‘N’ due to issues with PS/2 adapters
• Added saving facility (used by FloB)
• Stacking SpartaDOSX with another CAR (CTRL-SHIFT-RETURN)

Download:

• AVGCART [0021] (559)
• AVGCART Manual (1070)

source: atariage.com

A new version of the firmware for the Ultimate-64 (U64/U64E) / U2 / U2+ by Gideon is released.

This release has again some significant changes and improvements over 1.37 / 3.9. The following bullet list gives an overview of the features and fixes. Below the items, a short explanation is added.

This release has again some significant changes and improvements over 1.37 / 3.9. Please read the manual before installing 3.10a.

Fixes:

• [Issue-246] Fixed: Virtual Printer crashes when file cannot be created.
• [Issue-234] Deleting last item in directory makes selection invisible
• [Issue-236] Confirmation modal asking a question only gives ‘OK’ instead of ‘Yes/No’.
• [Issue-R17] Added mapping of ESC key to RUN/STOP.
• [Facebook Request] Added: Leave menu on mount (can be selected per drive)
• [Facebook Bug Report]: Allow Maverick (and others?) to write wrong sector headers on MFM tracks.
• [Facebook Bug Report]: Unable to select GeoRAM. Is now a mode of the RAM Expansion Unit.
• [Facebook Bug Report]: Fixed color palette not loaded at boot (U64 only).
• [Facebook Bug Report]: Fixed USB sticks not recognized
• [Messenger Report]: Improvements to palette file read. Rejects faulty files. Fixes hang-up
• [Messenger Report]: Fixes ‘Create DNP’ when run from Telnet. Turned out to be a stack overflow.
• [Email Discussion]: Adds EEPROM segment to GMOD2 when it is missing in the CRT file

U2:

• Fixes that U2 updater killed the flash before asking to update, leaving a semi-bricked device.
• Fixes drive sounds.

Modem:

• ACIA NMI pulse extension to extend over bad line. This allows the 6502 to see it always.
• Performance optimization ACIA / Modem
• Allow spaces after ATDT command.

Cartridge Support:

• Additional C128 cartridge variant that allows banking and offers some RAM (U2/U2+ only).

Download:

• U64/Ultimate-64 - U2 - U2+ v3.10a (Core: v1.41) (621)
• Installation and User Manual V3.10 (812)
• Ultimate 64 Starter Pack supporting FW 3.10 (870)

source: ultimate64.com github.com

A new version of the firmware for the Ultimate-64 (U64/U64E) / U2 / U2+ by Gideon is released.

This release has again some significant changes and improvements over 1.37 / 3.9. The following bullet list gives an overview of the features and fixes. Below the items, a short explanation is added.

This release has again some significant changes and improvements over 1.37 / 3.9. Please read the manual before installing 3.10.

Added features:

• Hardware emulation of 1571 and 1581 drives (U2+ / U64 only)
• MFM support on 1571, with enhanced G71 format to store MFM tracks.
• Added audio samples for insert / remove floppy disk.
• Added second drive sound to speaker output.
• Possiblity to use your own drive sound samples.
• Custom U64 palettes.
• SystemInfo Page, showing drive, cartridge and storage status.
• Flash Disk, to store drive roms, sounds, cartridges and such.
• Cartridges are now always CRT files. Selected by filename in the config.
• Cartridge compatibility check and reporting
• GMOD2 support, including EEPROM (U2+ / U64 only)
• Zaxxon Cartridge support.
• Implemented writing CVT files back to a disk image (enables copying CVT files across disks.)

Various UI Improvements:

• Select & Delete, using Shift-DEL
• Recursive delete from context menu.
• Long filename truncation (thanks to ‘naali’ / Antti Svenn)
• Scrollable string edit box.
• Adds save function for all cartridges, including EasyFlash and GMOD2.
• Full Clear function of configuration in Flash.
• Added ‘F3′ Help screen to config menu.

Technical Fixes:

• Fixed RGB mode (U64 only)
• Fixed block read command
• Fixed access of files with special chars in CBM disk images, accessed from IEC
• Fixed UCI issues with SidPlay and others
• Fixed colon issue in Ultimate Kernal ROM
• Fixed crash on invalid file chain CBM filesystems
• Fixed check order DIR / VOLUME; fixes some issues with exFAT directories
• Added M and V commands in modem emulation layer, V now supporting numeric responses. Thanks Scott Hutter
• Fixed the root cause of the VOLUME bit set in exFAT directories
• Fixed missing ‘probe’ for filesystems on multi-partition disks
• Fixed loading from wrong device ID when issuing the ‘run disk’ command
• Fixed many little bugs in the generation of CVT files (copying GEOS files from a disk image)
• Adopted changes to U64 Kernal to set default loading ID, as submitted by Leif Bloomquist
• Adopted USB modifier key handling, as submitted by Peter de Schrijver
• Corrected bug in extended partition table reading
• Relaxed C128 cartridge timing (for C128 carts)
• Extended UCI I/O bytes to support Hyperspeed Kernal properly
• Check for file copy onto itself
• Increased robustness against loading faulty disk images
• Fixed VIA latch mode in 1541/1571.
• [Issue 227] Fixes ‘get sensible name’ function for Ulticopy
• Fix for .d71 sector allocation – format should give 1328 blocks free, not 1347.
• Fixes possible crash when decoding a GCR track to binary
• [Issue 160]: SpeedDOS / DolphinDOS loading errors

Download:

• U64/Ultimate-64 - U2 - U2+ v3.10 (Core: v1.41) (587)
• Installation and User Manual V3.10 (812)
• Ultimate 64 Starter Pack supporting FW 3.10 (870)

source: ultimate64.com github.com

Released a new “unofficial” version of the firmware for the Ultimate-64 / U2+ by Gideon.

Changelog:

Changes since official release (3.9 / 1.37)

• Fixed RGB mode (U64 only)
• Fixed block read command
• Fixed access of files with special chars in CBM disk images, accessed from IEC
• Fixed UCI issues with SidPlay and others
• Fixed colon issue in Ultimate Kernal ROM
• Fixed crash on invalid file chain CBM filesystems
• Fixed check order DIR / VOLUME; fixes some issues with exFAT directories
• Added M and V commands in modem emulation layer, V now supporting numeric responses. Thanks Scott Hutter
• Fixed the root cause of the VOLUME bit set in exFAT directories
• Fixed missing ‘probe’ for filesystems on multi-partition disks
• Fixed loading from wrong device ID when issuing the ‘run disk’ command
• Fixed many little bugs in the generation of CVT files (copying GEOS files from a disk image)
• Implemented writing CVT files back to a disk image (enables copying CVT files across disks.)
• Adopted changes to U64 Kernal to set default loading ID, as submitted by Leif Bloomquist
• Adopted USB modifier key handling, as submitted by Peter de Schrijver
• Corrected bug in extended partition table reading

Download:

• U2+ Unofficial Firmware (07/03/2021) (716)
• U64 Unofficial Firmware (07/03/2021) (688)

source: ultimate64.com github.com